Add Secure Encrypted Virtualization (SEV) helper library.
The library provides the routines to:
- set or clear memory encryption bit for a given memory region.
- query whether SEV is enabled.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In the DXE fw_cfg instance:
- QemuFwCfgS3Enabled() queries S3 enablement via fw_cfg. This behavior is
shared with the PEI fw_cfg instance, and the DXE fw_cfg instance already
pulls in the function from "QemuFwCfgS3PeiDxe.c".
- If QemuFwCfgS3Enabled() returns TRUE, the client module is permitted to
call QemuFwCfgS3CallWhenBootScriptReady().
We provide a fully functional implementation for
QemuFwCfgS3CallWhenBootScriptReady(). A protocol notify is installed at
TPL_CALLBACK for EFI_S3_SAVE_STATE_PROTOCOL. If / once the protocol is
available, the client module's Callback() function is called, which is
expected to produce ACPI S3 Boot Script opcodes using the helper
functions listed below. In QemuFwCfgS3CallWhenBootScriptReady(), we also
allocate a reserved memory buffer, sized & typed by the client module,
for the opcodes and (internally) the fw_cfg DMA operations to work upon,
during S3 resume.
This behavior is unique to the DXE fw_cfg instance. Thus, add the
function to "QemuFwCfgS3Dxe.c".
- The QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(),
QemuFwCfgS3ScriptSkipBytes(), and QemuFwCfgS3ScriptCheckValue()
functions are also implemented usefully, since the client module's
Callback() function is expected to invoke them.
Each of the first three functions produces MEM_WRITE, IO_WRITE, and
MEM_POLL opcodes, to set up the DMA command in reserved memory, to start
the DMA transfer, and to check the DMA result, respectively.
The QemuFwCfgS3ScriptCheckValue() function produces a MEM_POLL opcode to
validate an unsigned integer field in data that was read via
QemuFwCfgS3ScriptReadBytes().
This behavior is again unique to the DXE fw_cfg instance, so add the
functions to "QemuFwCfgS3Dxe.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the PEI fw_cfg instance:
- QemuFwCfgS3Enabled() queries S3 enablement via fw_cfg. This behavior is
shared with the DXE fw_cfg instance, and the PEI fw_cfg instance already
pulls in the function from "QemuFwCfgS3PeiDxe.c".
- If QemuFwCfgS3Enabled() returns TRUE, the client module is permitted to
call QemuFwCfgS3CallWhenBootScriptReady(). However, in the PEI phase we
have no support for capturing ACPI S3 Boot Script opcodes, hence we
return RETURN_UNSUPPORTED unconditionally. This behavior is unique to
the PEI fw_cfg instance, so add the function to "QemuFwCfgS3Pei.c".
- Consequently, the QemuFwCfgS3ScriptWriteBytes(),
QemuFwCfgS3ScriptReadBytes(), QemuFwCfgS3ScriptSkipBytes(), and
QemuFwCfgS3ScriptCheckValue() functions must never be called. (They
could only be called from the client module's callback, but
QemuFwCfgS3CallWhenBootScriptReady() will never install such callback in
the PEI fw_cfg instance -- see above.)
This behavior is not unique to the PEI fw_cfg instance (it is shared
with the Base Null instance), so pull in these functions from
"QemuFwCfgS3BasePei.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the Base Null instance:
- QemuFwCfgS3Enabled() returns constant FALSE. This is unique to the Base
Null instance, and the function is already present in
"QemuFwCfgS3Base.c".
- The QemuFwCfgS3CallWhenBootScriptReady() function must never be called
(according to the documentation, given the above). This is also unique
to the Base Null instance, so implement the function in
"QemuFwCfgS3Base.c".
- Consequently, the QemuFwCfgS3ScriptWriteBytes(),
QemuFwCfgS3ScriptReadBytes(), QemuFwCfgS3ScriptSkipBytes(), and
QemuFwCfgS3ScriptCheckValue() functions must never be called either.
This behavior is not unique to the Base Null instance (it will be shared
with the PEI fw_cfg instance), so add these functions to
"QemuFwCfgS3BasePei.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this point we're ready to retire QemuFwCfgS3Enabled() from the
QemuFwCfgLib class, together with its implementations in:
- ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
- OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
Extend all modules that call the function with a new QemuFwCfgS3Lib class
dependency. Thanks to the previously added library class, instances, and
class resolutions, we can do this switch now as tightly as possible.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch introduces PeiQemuFwCfgS3LibFwCfg, a limited functionality
QemuFwCfgS3Lib instance, for PEI phase modules.
The patch also introduces DxeQemuFwCfgS3LibFwCfg, a full functionality
QemuFwCfgS3Lib instance, for DXE_DRIVER and DXE_RUNTIME_DRIVER modules.
These library instances share the QemuFwCfgS3Enabled() function. The
function actually uses fw_cfg; the implementation is copied from
"OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c".
The library instances will diverge in the following patches.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance returns constant FALSE from QemuFwCfgS3Enabled(),
and all other library functions trigger assertion failures. It is suitable
for QEMU targets and machine types that never enable S3.
The QemuFwCfgS3Enabled() implementation is copied from
"ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c". Stubs for further
QemuFwCfgS3Lib APIs (with assertion failures, see above) will be added
later.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_DMA_ADDRESS macro for IO Ports 0x514 and 0x518
(most significant and least significant halves of the DMA Address
Register, respectively), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_DATA macro for IO Port 0x511 (the Data Register),
and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the FW_CFG_IO_SELECTOR macro for IO Port 0x510 (the Selector
Register), and update all references in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce the new public API QemuFwCfgSkipBytes(), for advancing over
bytes in the selected firmware configuration item without transferring
data between the item and the caller.
When the DMA interface is available (the common case), the operation is
instantaneous. As a fallback, provide a loop of chunked reads into a small
stack-allocated scratch buffer.
This patch enables OvmfPkg/QemuFwCfgLib to overwrite part of a writeable
fw_cfg file, which will be particularly useful for the upcoming
QEMU_LOADER_WRITE_POINTER command in OvmfPkg/AcpiPlatformDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The fw_cfg DMA interface provides a simple method to skip over bytes in an
fw_cfg blob before reading or writing more bytes.
InternalQemuFwCfgDmaBytes() can support it easily, we just have to expose
the Control parameter more flexibly than the current "Write" BOOLEAN.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitely return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Fifo routines from the QuemuFwCfgLib library have been ported
to the new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The Debug Agent in the SourceLevelDebugPkg can multiplex
both source level debug messages and console messages on
the same UART. When this is done, the Debug Agent owns
the UART device and an additional device handle with a
Serial I/O Protocol is produced with a VenHw device path
node.
In order for a platform to provide a UART based console
when the Debug Agent is using the same UART device, the
PlatformBootManagerLib must consider the SerialI/O
Protocol produces by the Debug Agent as one of the
supported consoles.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Because EFIAPI is necessary for functions declared in library class header
files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
The benefits of the DMA-like access method are (a) speed, (b) write
support in QEMU 2.9+.
(IOPort-based write support was discontinued in QEMU 2.4, and the
DMA-based one is being added to QEMU 2.9. Write support needs no separate
feature detection because writeability is governed on the level of
individual fw_cfg files -- if a file meant to be written by the firmware
exists in the directory, then it is writeable with the DMA method.)
We don't enable this feature for the SEC library instance, because:
- the SEC instance remains without clients (I've checked that it builds
though),
- in SEC, any possible fw_cfg use is expected to be small and read-only.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InternalQemuFwCfgIsAvailable() is an API that is incorrectly exposed by
the "OvmfPkg/Include/Library/QemuFwCfgLib.h" library class header; the API
is meant to be used internally to library instances (if it's needed at
all).
In OvmfPkg, we have two lib instances (for SEC and PEI/DXE); they provide
different implementations of InternalQemuFwCfgIsAvailable(), for the
shared file "OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c". Move the API
declaration to a new internal header called "QemuFwCfgLibInternal.h", and
drop EFIAPI in the process.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Convert the remaining pieces to make the code shorter and more readable.
Cc: Justen Jordan <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: tweak subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Rely on the central macro definition from "MdePkg/Include/Base.h" instead.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenConsoleSerialPortLib is a BASE type library instance, without being
restricted to UEFI client modules. (For example, the
"ArmVirtPkg/ArmVirtXen.dsc" platform builds this library instance into
"ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf", which is a SEC type
module.) For such library instances, including <Uefi/UefiBaseType.h> is
not right.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Prototype of BootLogoEnableLogo will change in following patches, so
do not call BootLogoEnableLogo to avoid build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Correct some typos (discovered with the codespell utility)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Run "unix2dos" on the affected files. "git show -b" produces no diff for
this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Translating QEMU's virtio-block OpenFirmware device path to a UEFI device
path prefix was one of the earliest case handled in QemuBootOrderLib. At
that time, I terminated the translation output (the UEFI devpath prefix)
with a "/HD(" suffix.
The intent was for the translation to prefix-match only boot options with
HD() device path nodes in them, that is, no auto-generated "device level"
boot options. This was motivated by prioritizing specific boot options
created by OS installers over auto-generated "device level" options.
However, practice has shown that:
- OS installers place their installed boot options first in the boot order
anyway,
- other device types (SATA disks, virtio-scsi disks), where "/HD(" is not
appended, work just fine,
- requiring "/HD(" actually causes problems: after the OS-installed
specific boot option has been lost (or purposely removed), the
auto-generated "device level" boot option does the right thing (see the
Default Boot Behavior under
<http://blog.uncooperative.org/blog/2014/02/06/the-efi-system-partition/>).
The "/HD(" requirement causes such boot options to be dropped, which
prevents "fallback.efi" from running.
Relax the matching by removing the "/HD(" suffix from the translated
prefix.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: e06a4cd134
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1373812
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This will add virtio-gpu-pci devices to ConOut automatically.
For further benefit, the change also allows OVMF to use the legacy-free /
secondary VGA adapter (added in QEMU commit 63e3e24d, "vga: add secondary
stdvga variant") as console.
ArmVirtPkg's PlatformBootManagerLib already filters with IS_PCI_DISPLAY();
see IsPciDisplay().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Originally-suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When compiling "OvmfPkg\Library\PciHostBridgeLib\XenSupport.c" for IA32,
the VS2015x86 compiler emits the following:
> XenSupport.c(41): error C2220: warning treated as error - no 'object'
> file generated
> XenSupport.c(41): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(48): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(49): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(50): warning C4244: 'function': conversion from 'UINT64' to
> 'UINTN', possible loss of data
> XenSupport.c(222): warning C4244: 'function': conversion from 'UINT64'
> to 'UINTN', possible loss of data
> XenSupport.c(241): warning C4244: 'function': conversion from 'UINT64'
> to 'UINTN', possible loss of data
PciLib functions take UINTN addresses that were encoded with the
PCI_LIB_ADDRESS() macro. We carry addresses from the macro invocations to
the function calls in two UINT64 variables however. This loses no data,
but it alerts VS2015x86. Change the variable types to UINTN.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removes any boot options that point to binaries built into the firmware
and have become stale due to any of the following:
- DXEFV's base address or size changed (historical),
- DXEFV's FvNameGuid changed,
- the FILE_GUID of the pointed-to binary changed,
- the referenced binary is no longer built into the firmware.
For example, multiple such "EFI Internal Shell" boot options can coexist.
They technically differ from each other, but may not describe any built-in
shell binary exactly. Such options can accumulate in a varstore over time,
and while they remain generally bootable (thanks to the efforts of
BmGetFileBufferByFvFilePath()), they look bad.
Filter out any stale options.
This functionality is not added to QemuBootOrderLib, because it is
independent from QEMU and fw_cfg.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When OVMF tried to load the file-based NvVars, it checked all the PCI
instances and connected the drivers to the mass storage device. However,
Xen registered its PCI device with a special class id (0xFF80), so
ConnectRecursivelyIfPciMassStorage() couldn't recognize it and skipped the
driver connecting for Xen PCI devices. In the end, the Xen block device
wasn't initialized until EfiBootManagerConnectAll() was called, and it's
already too late to load NvVars.
This commit connects the Xen drivers in ConnectRecursivelyIfPciMassStorage()
so that Xen can use the file-based NvVars.
v3:
* Introduce XenDetected() to cache the result of Xen detection instead
of relying on PcdPciDisableBusEnumeration.
v2:
* Cosmetic changes
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF (unlike ArmVirtPkg) has traditionally cleared the screen after
connecting devices. This is not really necessary, and keeping the logo up
while the progress bar is advancing at the bottom looks great. So don't
clear the screen.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's Platform BDS used to have a nice progress bar (with
IntelFrameworkModulePkg BDS). We can restore it by copying the
PlatformBootManagerWaitCallback() function verbatim from
Nt32Pkg/Library/PlatformBootManagerLib/PlatformBootManager.c
It can be tested by passing the following option to QEMU (5 seconds):
-boot menu=on,splash-time=5000
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the course of porting OvmfPkg to the MdeModulePkg BDS, commit
817fb3ac2a
OvmfPkg/PlatformBootManagerLib: Add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 817fb3ac2a, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When OVMF tried to restore the variables from the file-based NvVars, it
failed to set the read-only variable and aborted the restoration with
this message:
Variable Check ReadOnly variable fail Write Protected - 04B37FE8-F6AE-480B-BDD5-37D98C5E89AA:VarErrorFlag
Since it's a read-only variable maintained by the firmware, it's
pointless to restore the previous value, so the check can be
relaxed to allow EFI_WRITE_PROTECTED returned from SetVariable.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
"SerializeVariablesLib.h" is pure LF, while "SerializeVariablesLib.c" is
mixed (its only CRLF terminators are from commit e678f9db89). Convert
them both with "unix2dos".
"git show -b" produces no code hunks for this patch. Due to its simple and
mechanic nature (and because it blocks the application of another patch),
it's being committed without review.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.
ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.
This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.
The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In the next patches, we'll differentiate the PMBA IO port address that we
program on PIIX4 vs. Q35.
Normally we'd just turn PcdAcpiPmBaseAddress into a dynamic PCD. However,
because we need this value in BaseRomAcpiTimerLib too (which cannot access
RAM and dynamic PCDs), it must remain a build time constant. We will
introduce its Q35 counterpart later.
As first step, replace the PCD with a new macro in "OvmfPlatforms.h";
Jordan prefers the latter to fixed PCDs in this instance.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We should store the right value to the PMBA (if the PMBA needs
initialization) before setting mAcpiTimerIoAddr from the PMBA.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: f122712b42
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We currently register the shell before creating the boot options for
the block devices and the network devices, so the boot manager boots
into the internal shell if the user doesn't specify the boot order.
However, Xen doesn't support fw_cfg, so there is no way to change the
boot order with the external command, and the firmware will always
boot into the internal shell if the user doesn't interfere the boot
process.
This patch postpones the shell registration after MdeModulePkg/BDS
creates all the boot options for the block and network devices, so
that firmware will try to boot the block/network devices first.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuBootOrderLib.
(Note: QemuBootOrderLib is deprecated at this point (see USE_OLD_BDS in
the DSC files), but until we remove it, it should be kept in sync with
QemuNewBootOrderLib.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuNewBootOrderLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The patch re-factors the code without functionality impact.
Next patch will add code to support OVMF above Xen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In order to match the previous commit, Base must be strictly larger than
Limit if some type of aperture is not available on a PCI root bridge.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Width and Height assignment suppresses an invalid gcc-4.8 warning
on Ia32.
These warnings look unjustified to me. Namely, near the beginning of
the function, there is a while(1) loop. In that loop,
ConvertBmpToGopBlt() is called unconditionally. If the call fails,
the rest of the loop body is not reached (where the Height and Width
variables are used -- the compiler warns about their use in the
switch statement). If the call succeeds, then the variables are set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
EnableQuietBoot and DisableQuietBoot are copied from
IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c.
Because these two functions are not in UefiBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch uses EfiBootManagerRefreshAllBootOption() to collect
all boot options and uses SetBootOrderFromQemu exposed by
QemuNewBootOrderLib to adjust the boot option order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch changes PlatformBdsConnectSequence() to use library API
exposed from UefiBootManagerLib and removes the additional
connect ALL action.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
MdeModulePkg/BDS doesn't launch UI (Boot Manager Menu) from platform
side.
The change removes the code which launches the UI but still set the
boot timeout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The major difference between IntelFrameworkModulePkg/BDS and
MdeModulePkg/BDS is the latter connects the consoles in core
code while the former connects in platform code.
The change initializes the console variables in
PlatformBootManagerBeforeConsole() and removes the console
connection code.
It also removes unused functions: PlatformBdsNoConsoleAction()
and LockKeyboards().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The DevicePathToStr() function (in
"IntelFrameworkModulePkg/Library/GenericBdsLib/DevicePath.c") is a
simple wrapper around ConvertDevicePathToText().
DevicePathToStr() passes DisplayOnly=TRUE and AllowShortcuts=TRUE to
ConvertDevicePathToText(), whereas in this patch, both parameters are
flipped to FALSE.
The formatted devpaths are used only for debugging purposes, so this
change is safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Change the function name to follow new library class
PlatformBootManagerLib interfaces.
NOTE: There is no progress bar during BDS timeout waiting.
In order to show the progress bar, PlatformBootManagerWaitCallback ()
needs to change to draw it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It will be changed to build with MdeModulePkg/BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NOTE: SetBootOrderFromQemu() interface is not changed.
But when the old IntelFrameworkModulePkg/BDS is no longer used in
OVMF and ArmVirtPkg, additional patch will be submitted to change
this interface to remove parameter BootOptionList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
QemuNewBootOrderLib will be changed to work with MdeModulePkg/BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
At the moment, the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is only installed if
S3 is enabled -- at the end of SaveS3BootScript().
While a runtime OS is never booted with SMM unlocked (because the SMM IPL
locks down SMM as a last resort:
> SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To
> Boot signal
> SmmInstallProtocolInterface: [EfiSmmReadyToLockProtocol] 0
> Patch page table start ...
> Patch page table done!
> SMM IPL locked SMRAM window
), we shouldn't allow UEFI drivers and applications either to mess with
SMM just because S3 is disabled. So install
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL in PlatformBdsInit() unconditionally.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's PlatformBdsLib currently makes SMM vulnerable to the following
attack:
(1) a malicious guest OS copies a UEFI driver module to the EFI system
partition,
(2) the OS adds the driver as a Driver#### option, and references it from
DriverOrder,
(3) at next boot, the BdsEntry() function in
"IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" processes
Driver#### and DriverOrder between the calls to PlatformBdsInit() and
PlatformBdsPolicyBehavior(),
(4) OVMF locks down SMM only in PlatformBdsPolicyBehavior(), hence the
driver runs with SMM unlocked.
The BdsEntry() function of the MdeModulePkg BDS driver (in file
"MdeModulePkg/Universal/BdsDxe/BdsEntry.c") recommends to "Signal
ReadyToLock event" in PlatformBootManagerBeforeConsole() -- which
corresponds to PlatformBdsInit() --, not in
PlatformBootManagerAfterConsole() -- which corresponds to
PlatformBdsPolicyBehavior().
Albeit an independent question, but it's worth mentioning: this patch also
brings OvmfPkg's PlatformBdsInit() closer to ArmVirtPkg's. Namely, the
latter signals End-of-Dxe in PlatformBdsInit() already.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenIoMmioLib depends on MemoryAllocationLib, and uses its header, but
failed to declare the dependency in its INF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, the LockBox protocol is installed in entrypoint of
OVMF AcpiS3SaveDxe.
We can let the first driver run with LockBoxDxeLib linked to have its
library constructor to install LockBox protocol on the ImageHandle.
As other drivers may have gEfiLockBoxProtocolGuid dependency,
the first driver should run before them.
The later patches to retire AcpiS3SaveDxe for OVMF depends on this patch.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In VirtIo 1.0, a device can reject a self-inconsistent feature bitmap
through the new VSTAT_FEATURES_OK status bit. (For example if the driver
requests a higher level feature but clears a prerequisite feature.) This
function is a small wrapper around
VIRTIO_DEVICE_PROTOCOL.SetGuestFeatures() that also verifies if the VirtIo
1.0 device accepts the feature bitmap.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In virtio-1.0, it is not enough to pass the base address of the virtio
queue to the hypervisor (as a frame number); instead it will want the
addresses of the descriptor table, the available ring, and the used ring
separately. Pass the VRING object to the SetQueueAddress() member
function; this will enable a virtio-1.0 implementation. Convert the
current producers and consumers to this prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function was never consumed by drivers, and the current prototype is
unsupportable with virtio-1.0. Remove the function from the protocol
definition, and drop the current (unused) implementations.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The virtio-1.0 spec widens the Features bitmap to 64 bits. Modify the
declarations of the GetDeviceFeatures() and SetGuestFeatures() protocol
member functions accordingly.
Normally, a protocol cannot be changed in incompatible ways if the GUID
stays the same; however, we've always been extremely clear that
VIRTIO_DEVICE_PROTOCOL is internal to edk2. See for example the top of
"OvmfPkg/Include/Protocol/VirtioDevice.h".
In this patch, all producers and consumers of the GetDeviceFeatures() and
SetGuestFeatures() protocol members are updated.
The drivers that currently produce these members are "legacy" drivers (in
virtio-1.0 terminology), and they cannot (and will not) handle feature
bits above BIT31. Therefore their conversion is only for compatibility
with the modified protocol interface. The consumers will be responsible
for checking the VIRTIO_DEVICE_PROTOCOL.Revision field, and for not
passing feature bits that these backends cannot handle.
The VirtioMmioGetDeviceFeatures() implementation stores the result of an
MmioRead32() call with normal assignment, so it needs no change beyond
adapting its prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
On the normal boot path (which is when PciHostBridgeDxe runs), the PCDs
have been calculated; report the 64-bit PCI host aperture to
PciHostBridgeDxe.
In the Ia32 build, the PCD values (zeros) come directly from the DEC file,
and this patch makes no difference.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
At this point, this signal doesn't do anything yet.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
By now OVMF makes MdeModulePkg/Bus/Pci/PciHostBridgeDxe go through
MMCONFIG (when running on Q35). Enable the driver to address each B/D/F's
config space up to and including offset 0xFFF.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha³ Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha³ Zegan <webczat_200@poczta.onet.pl>
This library is a trivial unification of the following two PciLib
instances (and the result is easily diffable against each):
- MdePkg/Library/BasePciLibCf8
- MdePkg/Library/BasePciLibPciExpress
The PCI config access method is determined in the constructor function,
from the dynamic PCD "PcdOvmfHostBridgePciDevId" that is set by
PlatformPei.
The library instance is usable in DXE phase or later modules: the PciLib
instances being unified have no firmware phase / client module type
restrictions, and here the only PCD access is made in the constructor
function. That is, even before a given client executable's entry point is
invoked.
The library instance depends on PlatformPei both for setting the PCD
mentioned above, and also for enabling MMCONFIG on Q35. PEI and earlier
phase modules are not expected to need extended config access even on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha³ Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha³ Zegan <webczat_200@poczta.onet.pl>
We copy the code from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c], with a slight change: the
device path is allocated separately now.
This is the final field to initialize in PCI_ROOT_BRIDGE.
The type EFI_PCI_ROOT_BRIDGE_DEVICE_PATH is renamed to
OVMF_PCI_ROOT_BRIDGE_DEVICE_PATH. The original is a misnomer (it is not a
standard UEFI type) that dates back to PcAtChipsetPkg/PciHostBridgeDxe.
Simply removing the EFI_ suffix would result in
PCI_ROOT_BRIDGE_DEVICE_PATH, where PCI_ could incorrectly suggest a
relation with the PCI standards or the PCI-related generic edk2 code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In "OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", the
RootBridgeIoCheckParameter() function hard-codes the maximum offset for
the PCI config space as 0xFF (see the MAX_PCI_REG_ADDRESS macro), which
matches OVMF's 0xCF8 / 0xCFC config access method.
The "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" driver abstracts away config
space access via the PciSegmentLib class, so it has to be informed
separately about the config space size.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The bus aperture is copied verbatim from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c].
The IO and 32-bit MMIO apertures are matched to PlatformPei's settings.
PciHostBridgeLibDxe expects PciHostBridgeLib instances to advertize the
exact apertures.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InitRootBridge() in "OvmfPkg/PciHostBridgeDxe/PciHostBridge.c" passes the
EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM allocation attribute to
RootBridgeConstructor(); we should do the same here.
From "MdePkg/Include/Protocol/PciHostBridgeResourceAllocation.h":
/// If this bit is set, then the PCI Root Bridge does not support separate
/// windows for Non-prefetchable and Prefetchable memory. A PCI bus driver
/// needs to include requests for Prefetchable memory in the
/// Non-prefetchable memory pool.
Which implies that both the 32-bit and 64-bit prefetchable MMIO apertures
should be marked empty. (The CreateRootBridge() function actually enforces
this in "MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c".)
Furthermore, since OvmfPkg/PciHostBridgeDxe does *not* set the
EFI_PCI_HOST_BRIDGE_MEM64_DECODE allocation attribute:
/// If this bit is set, then the PCI Root Bridge supports 64 bit memory
/// windows. If this bit is not set, the PCI bus driver needs to include
/// requests for 64 bit memory address in the corresponding 32 bit memory
/// pool.
we follow suit in the PciHostBridgeLib instance.
In turn, the 64-bit MMIO apertures (both prefetchable and
non-prefetchable) should be marked empty.
MdeModulePkg/Bus/Pci/PciHostBridgeDxe enforces this too.
(64-bit MMIO aperture support, based on yet more fw_cfg files, is a
planned future improvement.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When this BOOLEAN member is FALSE, and the caller tries to set up a DMA
transfer between a PCI device and a host buffer not entirely under 4GB,
then "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" sets up a bounce buffer under
4GB, in the implementation of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Map().
Since that's exactly what RootBridgeIoMap() does in
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", stick with it in this
conversion.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These settings are copied from the RootBridgeConstructor() function, file
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This is the first of the patches that set the fields of PCI_ROOT_BRIDGE.
The structure is zero-filled as a precaution for later field additions.
Here we set the Segment member explicitly to zero (so that any later
customization can be easier).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function has no counterpart in OvmfPkg/PciHostBridgeDxe/, but the
PciHostBridgeLib class requires it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we import the scan for extra root buses from the
InitializePciHostBridge() function, in file
"OvmfPkg/PciHostBridgeDxe/PciHostBridge.c".
For the time being, the InitRootBridge() and UninitRootBridge() functions
are just placeholders.
The PciHostBridgeGetRootBridges() API expects us to return the
PCI_ROOT_BRIDGE structures in a contiguous array, instead of a linked
list. Therefore the following bits have to be converted manually:
(1) The array is allocated in advance, in a single step.
(2) The calculation of the array size depends on an explicit
multiplication, which we must check against overflow. Since more than
255 extra root bridges make no sense anyway, we use (1 + 255) as the
limit on the main plus all extra root bridges. This also ensures that
the UINTN multiplication doesn't overflow.
(3) The PciHostBridgeDxe code decrements "ExtraRootBridgesLeft" to
terminate the scanning early. Here we need track the increasing count
of used array elements as well, so we employ "ExtraRootBridges" as a
constant limit, and increment the new local variable "Initialized".
(4) The prototypes of InitRootBridge() and UninitRootBridge() reflect that
the PCI_ROOT_BRIDGE structure is allocated by the caller; only
in-place initialization is necessary.
Additionally, macros are employed for standard PCI quantities, from
"MdePkg/Include/IndustryStandard/Pci22.h":
- MAX_PCI_DEVICE_NUMBER (31) is replaced with PCI_MAX_DEVICE (same),
- the constant 255 is replaced with PCI_MAX_BUS,
- the (RootBridgeNumber < 256) condition is replaced with
(RootBridgeNumber <= PCI_MAX_BUS).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Brijesh Singh
Dandan Bi
Laszlo Ersek
Thomas Huth
Leo Duran
Michael Kinney
Anthony PERARD
Ruiyu Ni
Gary Lin
Ard Biesheuvel
Star Zeng