Per UEFI spec, iSCSI.Lun is a 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jie Lin <jie.lin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2: Add [LibraryClasses] section in INF file and refine coding style.
There are VS2015 NOOPT IA32 build failure like below in BaseSafeIntLib.
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allmul
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allshl
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __aullshr
This patch replaces direct shift/multiplication of 64-bit integer
with related function call to fix these failure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a variant of BaseDebugLibSerialPort that behaves correctly with
regards to the use of the serial port after ExitBootServices(). At boot
time, all DEBUG() prints and ASSERT() invocations are executed normally.
At runtime, DEBUG() prints are dropped entirely, and ASSERT()s omit the
serial output as well, and only perform the configured post-ASSERT()
action, i.e., issue a CPU breakpoint or enter a deadloop.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
If we have to negate UnsignedResult (due to exactly one of Multiplicand
and Multiplier being negative), and UnsignedResult is exactly
MIN_INT64_MAGNITUDE (value 2^63), then the statement
*Result = - ((INT64)UnsignedResult);
invokes both implementation-defined behavior and undefined behavior.
First, MIN_INT64_MAGNITUDE is not representable as INT64, therefore the
result of the (inner) conversion
(INT64)MIN_INT64_MAGNITUDE
is implementation-defined, or an implementation-defined signal is raised,
according to ISO C99 6.3.1.3p3.
Second, if we assume that the C language implementation defines the
conversion to INT64 simply as reinterpreting the bit pattern
0x8000_0000_0000_0000 as a signed integer in two's complement
representation, then the conversion immediately produces the negative
value MIN_INT64 (value -(2^63)). In turn, the (outer) negation
-(MIN_INT64)
invokes undefined behavior, because the mathematical result of the
negation, namely 2^63, cannot be represented in an INT64 object. (Not even
mentioning the fact that the mathematical result would be incorrect.) In
practice, the undefined negation of MIN_INT64 happens to produce an
unchanged, valid-looking result on x86, i.e. (-(MIN_INT64)) == MIN_INT64.
We can summarize this as the undefined -- effectless -- negation canceling
out the botched -- auto-negating -- implementation-defined conversion.
Instead of relying on such behavior, dedicate a branch to this situation:
assign MIN_INT64 directly. The branch can be triggered e.g. by multiplying
(2^62) by (-2).
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The definition of the MIN_INT64_MAGNITUDE macro is correct, but it's
harder to read than necessary: the sub-expression
(( (UINT64) - (MIN_INT64 + 1) ))
is doubly parenthesized. Reusing one pair of the outer parens, rewrite the
sub-expression (without change in meaning) so that the minus sign cannot
be mistaken for subtraction:
( (UINT64)(- (MIN_INT64 + 1)) )
The resultant macro definition matches the following expressions in
SafeInt64Mult():
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplicand = ((UINT64)(- (Multiplicand + 1))) + 1;
and
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplier = ((UINT64)(- (Multiplier + 1))) + 1;
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The addition in the assignment
SignedResult = Augend + Addend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer addition cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the addition if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The subtraction in the assignment
SignedResult = Minuend - Subtrahend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer subtraction cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the subtraction if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=838
Add new API to the UefiLib that locates and returns
an array of protocols instances that match a given
protocol.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Because DxeResetSystemLib links to this library to provide
reset system services, change UefiRuntimeLib to support
the same set of module types as what DxeResetSystemLib does.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add the PeiServicesResetSytstem2() function to the PeiServiesLib
to call the ResetSystem2() services in the PEI Services Table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Most of the RVCT assembly can be reused as is for MSFT except
for CpuBreakpoint.asm, which we need to force to Arm mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's implementation of [Ascii]StrnCpyS/[Ascii]StrnCatS calls
StrnLenS () to get the length of source string but supplies the
destination buffer size as max size.
It's a bug that may cause out-of-bound memory access.
For example:
StrnCpyS (Dest[10], 10, "hello", 6)
-> StrnLenS ("hello", 10) //< cause out-of bound memory access
In a pool guard enabled environment, when using shell to edit an
existing file which contains empty line, the page fault is met.
The patch fixes the four library functions to avoid such
out-of-bound memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=798
SafeIntLib provides helper functions to prevent integer overflow
during type conversion, addition, subtraction, and multiplication.
Conversion Functions
====================
* Converting from a signed type to an unsigned type of the same
size, or vice-versa.
* Converting to a smaller type that could possibly overflow.
* Converting from a signed type to a larger unsigned type.
Unsigned Addition, Subtraction, Multiplication
===============================================
* Unsigned integer math functions protect from overflow and
underflow (in case of subtraction).
Signed Addition, Subtraction, Multiplication
============================================
* Strongly consider using unsigned numbers.
* Signed numbers are often used where unsigned numbers should
be used. For example file sizes and array indices should always
be unsigned. Subtracting a larger positive signed number from a
smaller positive signed number with SafeInt32Sub() will succeed,
producing a negative number, that then must not be used as an
array index (but can occasionally be used as a pointer index.)
Similarly for adding a larger magnitude negative number to a
smaller magnitude positive number.
* SafeIntLib does not protect you from such errors. It tells you
if your integer operations overflowed, not if you are doing the
right thing with your non-overflowed integers.
* Likewise you can overflow a buffer with a non-overflowed
unsigned index.
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport21ef3a321cca516b1a6133bab4031a
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When compiling with any ARM toolchain and Os, registers can get
trashed when returning for the second time from SetJump because GCC
only handles this correctly when using standard names like 'setjmp' or
'getcontext'. When different names are used you have to use the
attribute 'returns_twice' to tell gcc to be extra careful.
example:
extern int FN_NAME(void*);
void jmp_buf_set(void *jmpb, void (*f)(void))
{
if (!FN_NAME(jmpb))
f();
}
this code produces this wrong code with Os:
00000000 <jmp_buf_set>:
0: e92d4010 push {r4, lr}
4: e1a04001 mov r4, r1
8: ebfffffe bl 0 <nonstandard_setjmp>
c: e3500000 cmp r0, #0
10: 01a03004 moveq r3, r4
14: 08bd4010 popeq {r4, lr}
18: 012fff13 bxeq r3
1c: e8bd4010 pop {r4, lr}
20: e12fff1e bx lr
The generated code pushes backups of r4 and lr to the stack and then
saves all registers using nonstandard_setjmp.
Then it pops the stack and jumps to the function in r3 which is the
main problem because now the function can overwrite our register
backups on the stack.
When we return a second time from the call to nonstandard_setjmp, the
stack pointer has it's original(pushed) position and when the code
pops r4 and lr from the stack the values are not guaranteed to be the
same.
When using a standard name like setjmp or getcontext or adding
'__attribute__((returns_twice))' to nonstandard_setjmp's declaration
the code looks different:
00000000 <jmp_buf_set>:
0: e92d4007 push {r0, r1, r2, lr}
4: e58d1004 str r1, [sp, #4]
8: ebfffffe bl 0 <setjmp>
c: e3500000 cmp r0, #0
10: 059d3004 ldreq r3, [sp, #4]
14: 01a0e00f moveq lr, pc
18: 012fff13 bxeq r3
1c: e28dd00c add sp, sp, #12
20: e49de004 pop {lr} ; (ldr lr, [sp], #4)
24: e12fff1e bx lr
Here the problem is being solved by restoring r3 from the stack
without popping it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is caused by previous patch which tried to fix string over-read,
which breaks UEFI menu rendering: the following
/------------------------------------------------------------------------------\
| Device Manager |
\------------------------------------------------------------------------------/
is rendered as
/\
| Device Manager |
\/.0 2.00 GHz
(the spurious digits are SMBIOS data from the home screen)
The problem appears to be that the CHAR16 value of BOXDRAW_HORIZONTAL
equals 0x2500, which means that testing ArgumentString[] != '\0'
(which tests the low byte only) will yield FALSE and terminate the
loop prematurely.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The new definitions include two structures
IA32_TASK_STATE_SEGMENT
IA32_TSS_DESCRIPTOR
two macros
IA32_GDT_TYPE_TSS
IA32_GDT_ALIGNMENT
and one API
VOID
EFIAPI
AsmWriteTr (
IN UINT16 Selector
);
They're needed to setup task gate and interrupt stack table for stack switch.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated. Also update
some function descriptors accordingly.
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Add BuildFv3Hob API in HobLib.h and implement the API
in HobLib instances PeiHobLib, DxeHobLib and DxeCoreHobLib.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CalculateCrc32() bases on the initialized mCrcTable. When CalculateCrc32()
is used, mCrcTable will take 1KB size in the image. When CalculateCrc32()
is not used, mCrcTable will not be built in the image, and no size impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=705
As mentioned in the above Bugzilla link by Steven, within the function
PathCleanUpDirectories(), when executing command:
"cd ."
under Shell, the input parameter 'Path' string will have string length
less than 2. Hence, it is possible for the below statement:
"if (StrCmp (Path + StrLen (Path) - 2, L"\\.") == 0) {"
to read contents before the string boundary.
This commit adds additional checks to avoid this.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In commit b6d11d7c46 ("MdePkg: BaseIoLibIntrinsic (IoLib class)
library", 2017-04-12), the MOV instructions in the write loops were
probably copied from the read loops. However, the operand order was not
adjusted.
As a result, the IoWriteFifoXX() routines, when invoked in SEV guests, now
overwrite the source buffer with value 0x01 / 0x0001 / 0x00000001 -- the
SevNoRepIo() function returns value 1 in EAX, in SEV guests --, and write
the same value to the target IO port.
Fix this by putting the target operand (AL / AX / EAX) first, and the
source operand (BYTE / WORD / DWORD [ESI/RSI]) second.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Fixes: b6d11d7c46
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Update InternalAllocateAlignedPages to use PeiServicesFreePages.
Let the InternalAllocateAlignedPages in PeiMemoryAllocationLib use
same algorithm with InternalAllocateAlignedPages in
UefiMemoryAllocationLib.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds the new library class S3PciSegmentLib to carry out
PCI configuration and enable the PCI operations to be replayed during
an S3 resume. This library class maps directly on top of the
PciSegmentLib class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds two PciSegmentLib instances that consumes
PciSegmentInfoLib to provide multiple segments PCI configuration
access.
BasePciSegmentLibSegmentInfo instance is a BASE library.
DxeRuntimePciSegmentLibSegmentInfo instance is to be linked with
runtime drivers to provide not only boot time but also runtime
PCI configuration access.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds PciSegmentInfoLib library class which is used
by PciSegmentLib (commit in next patch) to support multiple
segment PCI configuration access.
BasePciSegmentInfoLibNull instance is added but it shouldn't be
used by any real platform.
Any single segment platform that wants to use PciSegmentLib could
use BasePciSegmentLibPci instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1) Replace InternalBaseLibIsNodeInList() with
InternalBaseLibIsListValid().
- The verification whether Node is within the doubly-linked List
is now done by IsNodeInList().
- Whether the list is valid is returned.
2) The comments within InsertHeadList() and InsertTailList() stated
that it is checked whether Entry is not part of the doubly-linked
list. This was not done as argument 3 of
InternalBaseLibIsNodeInList() indicated whether the check is done,
not whether to check if the node is or is not in the list. This
has been fixed by using IsNodeInList() for the ASSERTs.
V2:
- Fix IsListEmpty() to ASSERT when the passed list is invalid.
- Introduce the VERIFY_IS_NODE_IN_LIST() macro to only verify whether the
passed node is part of the list when PcdVerifyNodeInList is TRUE.
V3:
- Introduce the ASSERT_VERIFY_NODE_IN_VALID_LIST() macro which,
depending on the value of PcdVerifyNodeInList, verifies whether
SecondEntry is or is not part of the same doubly-linked list as
FirstEntry and unconditionally verifies whether the doubly-linked
list FirstEntry is part of is valid. This prevents
InternalBaseLibIsListValid() from being called twice when a
function ASSERTs via the result of IsNodeInList(), as it calls
InternalBaseLibIsListValid() already.
- Remove the VERIFY_IS_NODE_IN_LIST() macro in favor of
ASSERT_VERIFY_NODE_IN_VALID_LIST().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds IsNodeInList() to BaseLib, which verifies the given
Node is part of the doubly-linked List provided.
V2:
- Rename "List" to "FirstEntry" and "Node" to "SecondEntry" to clarify that
"FirstEntry" does not need to be the doubly-linked list's head node.
V3:
- Remove ASSERTs from IsNodeInList() which are present in
InternalBaseLibIsListValid().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
* Fix the bug in DevPathFromTextDns()
V2:
* Add no IP instance case check.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The Hsti returned from InternalHstiFindAip() and temporally
allocated NewHsti need to be freed after used.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=587
The Status check in "if (!EFI_ERROR (Status))" condition is useless,
it should be NULL pointer check. And this patch also fixes a typo
"continous" to "continuous".
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=577
Currently the SmmIsBufferOutsideSmmValid() function in SmmMemLib.c will
ASSERT in certain conditions. Since this function is a "test" function,
it should not be making decisions on how to handle a failure.
Handling a failure should be left to the caller.
This patch is to remove ASSERT(FALSE) at line 178 of SmmMemLib.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=567
In function BasePrintLibSPrintMarker(), when processing ASCII format
strings, if the format string walker pointer 'Format' is pointing at the
end of the format string (i.e. '\0'), the following expression:
*(Format + 1)
will read an undefined value.
Though this value won't affect the functionality, since it will be masked
by variable 'FormatMask':
(*(Format + 1) << 8)) & FormatMask
(FormatMask is 0xff for ASCII format string)
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following two functions:
DevPathFromTextBluetooth()
DevPathToTextBluetooth()
The Bluetooth device address "UINT8 Address[6]" is displayed with the
order from Address[5] to Address[0]. This commit reverses the order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=514
The FvHandle input to InternalGetSectionFromFv() may be NULL,
then ASSERT will appear. It is because the LoadedImage->DeviceHandle
returned from InternalImageHandleToFvHandle() may be NULL.
For example for DxeCore, there is LoadedImage protocol installed
for it, but the LoadedImage->DeviceHandle could not be initialized
before the FV2 (contain DxeCore) protocol is installed.
This patch is to update InternalGetSectionFromFv() to return
EFI_NOT_FOUND directly for NULL FvHandle.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The sample instance check if IO resource is valid
one defined in GCD.
A platform may choose add more check to exclude some
other IO resource.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The commit adds check in function InternalPrintGraphic() to ensure that
the expression:
Blt->Width * Blt->Height * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
will not overflow in the UINTN range.
The commit also adds an explicit UINT32 type cast for 'Blt->Width' to
avoid possible overflow in the int range for:
Blt->Width * Blt->Height
Since both Blt->Width and Blt->Height are of type UINT16. They will be
promoted to int (signed) first, and then perform the multiplication
operation. If the result of multiplication between Blt->Width and
Blt->Height exceeds the range of type int, a potential incorrect size will
be passed into function AllocateZeroPool().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ruiyu Ni
Dandan Bi
Liming Gao
Ard Biesheuvel
Laszlo Ersek
Michael D Kinney
Pete Batard
Sean Brogan
M1cha
Wang, Jian J
Song, BinX
Zhang, Chao B
Star Zeng
Hao Wu
Marvin.Haeuser@outlook.com
Jiaxin Wu
Andrew Fish
Jiewen Yao
Jeff Fan