Section alignment of .data in GCC49 and GCC5 are 0x40
rather than 0x20 in GCC48 and below.
This causes a hang in PeiCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed by: Maurice Ma <maurice.ma@intel.com>
MpInitLib is consumed by CpuDxe
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed by: Maurice Ma <maurice.ma@intel.com>
The current PCI 64bit memory BAR size calculation in PciHostBridgeLib
assumes all 32 bits in the upper BAR are fully writable. However,
platform might only support partial address programming, such as 40bit
PCI BAR address. In this case the complement cannot be used for size
calculation. Instead, the lowest non-zero bit should be used for BAR
size calculation.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
When coreboot uses different baud rate from the default (115200), the
current BDS driver will not be able to enable serial console display
due to the inconsistent serial port PCD settings. By adding the
PlatformHookLib reference in the inf file, it will enforce the PCDs
to be aligned with what have been passed from coreboot.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Lee Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed by: Lee Leahy <leroy.p.leahy@intel.com>
Current CorebootPayloadPkg uses PciBusNoEnumerationDxe and
PciRootBridgenoEnumerationDxe copied from the DuetPkg. Now it will
switch to use the standard PciBusDxe and PciHostBridgeDxe from
MdeModulePkg. As a result, a coreboot specific PciHostBridgeLib
is added to collect pre-allocated PCI resources.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Fix Linux build failure with GCC 4.8.4 due to missing braces.
Change-Id: Ic0de6520605149f1bb74f8b60ce8cab8beda10a4
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Since the new BdsDxe driver in MdeModulePkg is used, the old
BdsPlatform library is not used any more and should be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Switch over to use BdxDxe generic driver in MdeModulePkg.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
In order to use the generic BdsDxe in MdeModulePkg, a platform
specific PlatfromBootManagerLib is required. This library will
help update the ConIn, ConOut and ErrOut variables.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Add the USB OHCI driver from revision 24ca2f35 of QuarkSocPkg.
Change-Id: Ie7aa0bc47d4ff06adc57976a5efb0e40ce4e1673
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Add SD and eMMC DXE driver support to CorebootPayloadPkg.
Change-Id: Ibfd3a2cc32a653ce51e38d9157ea3c6da25a5474
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Set the proper Shell file GUID so that the BDS transfers control to the
Shell.
Change-Id: I816636a340bbe2f76ac1973b9cb685084c4f88a0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Use the BaseSerialPortLib16550 which sets RTS and DTR during
initialization. This fixes the mis-matched flow control issue when
the flow control signals are connected between the host and target
and the host has flow control enabled.
Change-Id: I3505e129b2de3c5c17fff23c62553f15cd892dca
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Set the vendor to 0xffff which indicates the end of the list.
Change-Id: If6475e04d3675f0a932571a85d1dd3f301416b6a
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
eviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Convert to using DOS line endings.
Change-Id: Ie2f148867d9b2b386d556583afb6716ec21399e9
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Pass the serial port baudrate, register stride, input clock rate and
ID from coreboot to CorebootPayloadPkg.
Change-Id: I37111d23216e4effa2909337af7e8a6de36b61f7
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Use the serial drivers which update the serial PCDs from
PlatformHookLib.
Change-Id: Ie6a3526d56332ee1cf07edb24ff39634a981183f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add a define and use it with MaxLogicalProcessorNumber to enable this
PCD to be changed via the command line. Quark needs to set this value
to one during the builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Allow the serial port configuration to be overriden from the command
line.
Make the debug serial PCDs patchable in module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add all of the shell options from ShellBinPkg including building the
shell from source.
Enable link time optimization for GCC debug builds to keep the size
under 0x3e0000.
Test: Use -DSHELL_TYPE=BUILD_SHELL command line options to build the
shell from source. Run the result on Galileo Gen2.
Change-Id: I1e12adb57960ac5e75e682073540a9322aa03081
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove the references to DuetPkg. Copy the files from revision
ffea0a2ce2 of DuetPkg into
CorebootModulePkg. The components include:
* PciBusNoEnumerationDxe
* PciRootBridgeNoEnumerationDxe
* SataControllerDxe
TEST=Build and run on Galileo Gen2
Change-Id: Id07185f7e226749e5f7c6b6cb427bcef7eac8496
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove trailing white space from existing .dsc and .fdf files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Build tested with GCC 5.3 on IA32 and IA32+X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
1. Update fdf and dsc to use SerialDxe in MdeModulePkg.
2. Separate the code that gets SerialRegBase and SerialRegAccessType
by CbParseLib from CorebootPayloadPkg/Library/SerialPortLib to
PlatformHookLib, and then leverage BaseSerialPortLib16550 in
MdeModulePkg.
3. Remove CorebootPayloadPkg/SerialDxe and
CorebootPayloadPkg/Library/SerialPortLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18968 6f19259b-4bc3-4df7-8a09-765794883524
CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc doesn't use any X64
modules, so it should not specify the X64 architecture.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18073 6f19259b-4bc3-4df7-8a09-765794883524
Current CorebootPayloadPkg uses PciHostBridge and PciBusNoEnumeration
driver. It will cause the PCI bus resource incorrectly set in root
bridge instance. As a result all PCI devices behind a PCI bridge will
not show up in Shell 'PCI' command.
To resolve it use PciRootBridgeNoEnumeration driver instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17408 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
This was changed for the other EDK II packages in r16724.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17169 6f19259b-4bc3-4df7-8a09-765794883524
In current CorebootPayloadPkg.dec an empty 'Include' directory is
listed in [includes] section. However, this empty directory will
not be mirrored into git repo. If the source tree is pulled from git,
the 'Include' empty folder will not exist and it will cause build
failure. The fix is to remove the whole [Includes] section in the
DEC file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17164 6f19259b-4bc3-4df7-8a09-765794883524
Enable use of 1GB pages to avoid page table memory allocation failure.
The failure occurs when allocating enough 4KB pages to map a large
virtual address space, such as the 48-bit virtual address space of AMD
family 10h and family 15h processors. The change is needed only for the
X64 build because page tables are not used by the IA32 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17151 6f19259b-4bc3-4df7-8a09-765794883524
Use unique output directory names so that both IA32 and X64 payloads
can be built without overwriting one another.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17150 6f19259b-4bc3-4df7-8a09-765794883524
Add NOOPT build to accommodate source level debugging. The NOOPT build
avoids the use of compiler optimization so that every local variable is
accessible by a source level debugger.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17149 6f19259b-4bc3-4df7-8a09-765794883524
Increase payload size limit to accomodate large binaries, such as those
produced by Microsoft NOOPT builds and gcc DEBUG builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17148 6f19259b-4bc3-4df7-8a09-765794883524
Use extra braces around initialization data to prevent gcc compile
error: -Werror=missing-braces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17147 6f19259b-4bc3-4df7-8a09-765794883524
Initial coreboot UEFI payload code check in. It provides UEFI services on top of coreboot that allows UEFI OS boot.
CorebootPayloadPkg is source code package of coreboot Payload Modules, Provides definitions of payload image's layout and lists the modules required in DSC file.
It supports the following features:
- Support Unified Extensible Firmware Interface (UEFI) specification 2.4.
- Support Platform Initialization(PI) specification 1.3.
- Support execution as a coreboot payload.
- Support USB 3.0
- Support SATA/ATA devices.
- Support EFI aware OS boot.
The following features are not supported currently and have not been validated:
- GCC Tool Chains
- SMM Execution Environment
- Security Boot
It was tested on a Intel Bay Trail CRB platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17081 6f19259b-4bc3-4df7-8a09-765794883524
Prince Agyeman
Maurice Ma
Leahy, Leroy P
Justen, Jordan L
Laszlo Ersek
Star Zeng
Jordan Justen
Guo Dong
Ruiyu Ni
Scott Duplichan
laurie0131