According to the Intel GHCI specification document section 2.4.1, the
goal for instructions that do not have a corresponding TDCALL is for the
handler to treat the instruction as a NOP.
INVD does not have a corresponding TDCALL. This patch makes the #VE
handler treat INVD as a NOP.
Signed-off-by: Ryan Afranji <afranji@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The page allocator code in CoreFindFreePagesI() uses a mask derived from
its UINTN Alignment argument to align the descriptor end address of a
MEMORY_MAP entry to the requested alignment, in order to check whether
the descriptor covers enough sufficiently aligned area to satisfy the
request.
However, on 32-bit architectures, 'Alignment' is a 32-bit type, whereas
DescEnd is a 64-bit type, and so the resulting operation performed on
the end address comes down to masking with 0xfffff000 instead of the
intended 0xffffffff_fffff000. Given the -1 at the end of the expression,
the resulting address is 0xffffffff_fffffffff for any descriptor that
ends on a 4G aligned boundary, and this is certainly not what was
intended.
So cast Alignment to UINT64 to ensure that the mask has the right size.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Record Argc, Argv and Envp in EmuThunk Ppi so that other modules
can use these fields to change behavior depends on boot parameters
or environment.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
EmulatorPkg doesn't need depend on EmbeddedPkg, so remove the dependency.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The persistent memory is for PEIM to use, and won't lose during cold
or warm reset. PcdPersistentMemorySize is only used by WinHost.c,
other modules can check the persistent memory size using the field
PersistentMemorySize.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
When build in DEBUG, the code asserts that 5LPage support is there
when the physical address width is larger than 48.
In a RELEASE build it will just force LA57 to 1 in CR4
even if CPUID(7).ECX[16] says it is not supported.
UefiCpuPkg: Bug fix in 5LPage handling
The hang (in the ASSERT) in DEBUG is not warranted as there are
legal configurations with CPUID(7).ECX[16](==LA57)=0
and with a physical address width of larger than 48 (like 52).
This is also supported by this code:
https://github.com/tianocore/edk2/blob/master/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c#L221
There (as long as physical address width is smaller or equal to 52)
any address width above 48 will be reduced to 48 and the
system can and will work without 5LPaging.
The forced setting of LA57 in CR4 (in the absence of LA57 in CPUID(7).ECX)
is a spec violation and should not happen.
Hence the proposed fix
a) removes the assert.
b) only returns TRUE from Is5LevelPagingNeeded if 5LPaging is actually
supported by HW.
Signed-off-by: Robert Guenzel <robert.guenzel@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4173
Due to more core count increasement, it's hard to reflect all APs
state via AP bitvector support in the register. Actually, SMM CPU
driver doesn't need to check each AP state to know all CPUs in SMI
or not, one alternative method is to check the SMM Delayed & Blocked
AP Count number:
APs in SMI + Blocked Count + Disabled Count >= All supported Aps
(code comments explained why can be > All supported Aps)
With above change, the returned value of "SmmRegSmmEnable" &
"SmmRegSmmDelayed" & "SmmRegSmmBlocked" from SmmCpuFeaturesLib
should be the AP count number within the existing CPU package.
For register that return the bitvector state, require
SmmCpuFeaturesGetSmmRegister() returns count number of all bit per
logical processor within the same package.
For register that return the AP count, require
SmmCpuFeaturesGetSmmRegister() returns the register value directly.
v3:
- Refine the coding style
v2:
- Rename "mPackageBspInfo" to "mPackageFirstThreadIndex"
- Clarify the expected value of "SmmRegSmmEnable" & "SmmRegSmmDelayed" &
"SmmRegSmmBlocked" returned from SmmCpuFeaturesLib.
- Thread: https://edk2.groups.io/g/devel/message/96722
v1:
- Thread: https://edk2.groups.io/g/devel/message/96671
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
EmulatorPkg/Win calls LoadLibraryEx() when the corresponding DLL file
is found for each PEIM or DXE driver. The module entry point is
changed to point to the entry point from the DLL. This helps to
notify Visual Studio that a new windows module is loaded and
corresponding symbol parsing is performed for source level debugging.
But entry point from the DLL is only executed when the module is not
loaded by AddModHandle().
When reset happens, we need to clear the DLL loading so that in next
boot the module can be loaded again by AddModHandle().
Without this patch, source level debugging doesn't work after reset.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
The code changes develop UEFI application and dynamic command for
EfiMpServiceProtocol unit tests based on current UnitTestFramework.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Move the implementation of EfiMpServiceProtocol unit tests in a separate
function in preparation for developing the UEFI application and dynamic
command for the same unit tests.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
With the pending commit of UsbNetworkPkg, it will become common for
UsbBulkTransfer calls to timeout, given that the drivers are called from
MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers
check for network packets by calling UsbBulkTransfer with a timeout of
1ms.
Avoid console spam by moving DEBUG messages that occur each time a bulk
transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for both
EHCI and XHCI drivers.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Update ReadfishPkg.dec to remove PrivateInclude from the
[Includes.Common.Private] section. The PrivateInclude directory
does not contain any include files, and the PrivateInclude/Crt
include path remaining in the [Includes.Common.Private] section
providing the include path required to access the CRT related
include files by components within the RedfishPkg.
Without this update, there are two forms of #include statements
that can be used to include the CRT related include files.
Include files should only be available using one form of
#include statements.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4164
To support multiple FVs provided by UPL
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
When shutdown is requested, WinHost exits.
Otherwise, WinHost re-runs from SEC.
Tested no extra memory consumption with multiple resets in PEI.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In EmulatorPkg/Win, SEC and PEI_CORE are loaded to memory allocated
through VirtualAlloc. Though the corresponding DLL files are loaded
and the entry points in DLL files are executed. The loading to memory
allocated through VirtualAlloc is for the case when the DLL files can
not be loaded.
Actually some PEIMs like PcdPeim which are loaded before
"physical" RAM is discovered, they are executing in the original
location (FV) like XIP module in real platform.
The SEC and PEI_CORE can follow the same mechanism.
So, the VirtualAlloc call is removed.
This is to prepare the "reset" support to avoid additional OS memory
consumption when reset happens.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com
Move the "physical" RAM allocation from WinPeiAutoScan
to main() entrypoint.
This is to prepare the changes for "reset" support.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Fix a typo of "RedfishLibs.dsc.inc" in RedfishLibs.dsc.inc, and correct
the name of the .fdf.inc filename in Redfish.fdf.inc.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4167
In CrtLibSupport.h, time_t is defined as INT32, and its maximum value
is 2147483647. That is, the corresponding maximum timestamp is
2038-01-19 11:14:07. Therefore, overflow occurs when the test time
exceeds 2038-01-19 11:14:07. So change the type of time_t to INT64 and
also change the type of variables in function gmtime which calculated
with time_t.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Zihong Yi <yizihong@huawei.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4097
The BaseCryptLib in the CryptoPkg currently supports ParallelHash
algorithm for SMM. The MP Services PPI and MP Services Protocol
could be used to enable ParallelHash in PEI and DXE
versions of the BaseCryptLib.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
There should be a check that the FV HeaderLength cannot be an odd
number. Otherwise in the following CalculateSum16 there would be an
ASSERT.
In ValidateFvHeader@QemuFlashFvbServicesRuntimeDxe/FwBlockServices.c
there a is similar check to the FwVolHeader->HeaderLength.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4178
* Change GoogleTestLib class from private to public.
* Change UnitTestPersistenceLib class from private to public.
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Upgrade openssl to 1.1.1s.
Pick up bugfixes from the latest openssl release, which include
some GCC build warnings cleaning up.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
LoongArch64: Pcie devices that come with OPROM may require large Mem Space,
and downgrading all 64 Bit Bars may result in insufficient space.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4157
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Co-authored-by: Bo Zhu <zhubo@loongson.cn>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adds a GitHub issue template to direct contributors familiar with
GitHub's issue tracker to the external resources used by TianoCore.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
There was previously a lower bound on the value of TickPeriod such that
it couldn't be less than 10 us. However, that was removed from the PI
Specification in the 1.0 errata released in 2007. From the revision
history:
"M171 Remove 10 us lower bound restriction for the TickPeriod in the
Metronome"
Update the documentation of TickPeriod in MetronomeDxe/Metronome.c to
remove mention of the lower bound.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4143
Fix the name of InternalSyncCompareExchange64() function.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Zhihao Li <zhihao.li@intel.com>
Tested-by: Zhihao Li <zhihao.li@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
DP command should be able to parse the FPDT ACPI table and dump
the ResetEnd which was logged at the beginning of the firmware
image execution. So that DP can calculate SEC phase time duration
start from the beginning of firmware image execution.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: zhenhuay <zhenhua.yang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Enables dependabot in this repo so we can better alerted when
dependency updates are available.
This GitHub action will automatically create pull requests and
summarize the dependency details. Because it is a pull request,
the CI system will validate the dependency update in the pull
request.
Configures dependabot for:
1. PIP module updates
2. GitHub action updates
The maintainers/reviewers of the .github directory were added as
pull request reviewers so they can be notified when the pull request
is available.
Note to Maintainers:
After this change is committed, PRs from dependabot will be
automatically created in the edk2 repo. Never set the 'push' label
directly on these PRs. If a dependency identified by dependedabot
looks like one that should be updated in the edk2 repo, then copy
the PR generated by dependabot to your personal fork and update the
commit message to follow the edk2 commit message requirements and
send as a normal code review.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4153
1.Upgrade spec revision to 0.9
2.Align .upld_info with 4-byte boundary by spec
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: VictorX Hsu <victorx.hsu@intel.com>
Remove ASSERTs in ArmTrngLibConstructor() that prevent from
booting on DEBUG builds.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Updates edk2-pytool-library to pick up a minor bug fix release:
0.12.0 to 0.12.1 changes:
- path_utilities.py: Prevent path case modification in
GetContainingModules()
That change prevents the case of paths from being set to lower case
when returned from the function to avoid impacting case-sensitive
callers.
Release notes:
https://github.com/tianocore/edk2-pytool-library/releases/tag/v0.12.1
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4150
GetArmTrngVersion() is used to check the presence of an Arm
Trng. If not found, an ASSERT prevents from booting in DEBUG
builds.
Remove this ASSERT.
Reported-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
VmgExitLib is renamed as CcExitLib. The related section in
Maintainers.txt should be updated as well.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
APIs which are defined in CcExitLib.h are added with the CcExit prefix.
This is to make the APIs' name more meaningful.
This change impacts OvmfPkg/UefiCpuPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
VmgExitLib once was designed to provide interfaces to support #VC handler
and issue VMGEXIT instruction. After TDVF (enable TDX feature in OVMF) is
introduced, this library is updated to support #VE as well. Now the name
of VmgExitLib cannot reflect what the lib does.
This patch renames VmgExitLib to CcExitLib (Cc means Confidential
Computing). This is a simple renaming and there is no logic changes.
After renaming all the VmgExitLib related codes are updated with
CcExitLib. These changes are in OvmfPkg/UefiCpuPkg/UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4140
Some implementations may need to keep the initial Reset code to be
separated out from rest of the code.This request is to add padding at
lower 4K region below 4 GB which will result having only few jmp
instructions and data at that region.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Duggapu Chinni B <chinni.b.duggapu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
Set environment variable GTEST_OUTPUT to specify the output
format of XML and the output file name. Both CMOCKA_XML_FILE
and GTEST_OUTPUT are set for each host based unit test to
support both cmocka unit tests and gtest unit tests.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Add /Zi to CC_FLAGS in CmockaLib.inf to enable symbol information
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
Add submodule for googletest and add GoogleTestLib that is
required for GoogleTest based unit tests. Add GoogleTest
documentation to Readme.md along with a port of the sample
unit test to the GoogleTest style.
A few typos in Readme.md are also fixed.
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
When unit testing is enabled, make sure _ASSERT() is not already
defined by the host environment before defining _ASSERT(). This
avoids conflicts with VS20xx builds of GoogleTest based unit tests.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4134
* Map NULL to nullptr or __null when c++ compiler is used.
* Map STATIC_ASSERT to static_assert when a c++ compiler is used.
* Typecast RETURN_SUCCESS to type RETURN_STATUS to match type used
by all return error/warning status codes. C++ has stricter type
checking and found this inconsistency.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4114
1.Use xmm5 slot 1 and xmm6 slot 3 to save ucode status and UPD pointer
respectively in TempRamInitApi in IA32 FspSecCoreT.
2.Correct inappropriate description in the return value of
AsmGetFspInfoHeader.
3.Replace hardcoded offset value 0x1C with FSP_HEADER_IMGBASE_OFFSET in
FspHeler.nasm.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Chinni B Duggapu <chinni.b.duggapu@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
ArmTrngLib crashes when run in DEBUG mode due to the fact that it passed
the [truncated] GUID value to a DEBUG() print statement instead of a
pointer to the GUID which is what the %g conversion expects.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4135
Added spec version check while publishing new Type9 fields,
added Slot Pitch field which was missing and
corrected the publishing order as per Smbios spec.
Cc: Vasudevan S <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4146
Update edk2-pytool-library to version 0.12.0 that adds support for
the environment variable PYTOOL_TEMPORARILY_IGNORE_NESTED_EDK_PACKAGES
that can be set to true to ignore nested packages instead of breaking
the build with an exception. Nested packages are not allowed by the
edk2 specifications. This environment variable allows pytools to run
with reduced functionality if nested packages are present giving
downstream consumers of edk2 that use pytools time to resolve the use
of nested packages and restore all features of pytools.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Ryan Afranji
Ard Biesheuvel
Liu, Zhiguang
Robert Guenzel
Wu, Jiaxin
Ray Ni
Jason Lou
Rebecca Cran
Michael D Kinney
MarsX Lin
Zihong Yi
Zhihao Li
Min M Xu
Gang Chen
Dongyan Qian
Michael Kubacki
Sunil V L
zhenhuay
Zhang, JuX
VictorX Hsu
Pierre Gondois
Duggapu, Chinni B
Kuo, Ted
Sainadh Nagolu