KVM on ARM currently masks the timer interrupt on the timer side when
delivering an interrupt to the guest. This itself is a workaround for an
issue where the interrupt is reraised and trapped by the host as soon as
the guest is entered, resulting in the guest being starved.
Work around this by calling ArmGenericTimerEnable () after servicing each
interrupt. The virtual version of ArmGenericTimerCounterLib will then
make sure to unmask the interrupt again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16144 6f19259b-4bc3-4df7-8a09-765794883524
Some platforms do not have SysConfig controller used by the ARM
Versatile Express.
Some peripheral drivers currently rely on SysConfigLib (eg: PL031
RTC driver, LCD driver).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16143 6f19259b-4bc3-4df7-8a09-765794883524
AppPkg: Replace existing DevShell dependencies with DevMedia.
These patches will NOT cause existing code which uses DevShell to break.
During an interim period, either DevShell or DevMedia may be used.
In the future, DevShell will be removed from the code base.
During the interim, DevShell and DevMedia refer to the same library.
StdLib/LibC/Uefi/Devices/daShell.inf
Make this library also satisfy the DevMedia library class.
StdLib/StdLib.inc
Add a library class definition for DevMedia
AppPkg/Applications/OrderedCollectionTest/OrderedCollectionTest.inf
AppPkg/Applications/Python/PythonCore.inf
AppPkg/Applications/Sockets/GetAddrInfo/GetAddrInfo.inf
AppPkg/Applications/Sockets/GetHostByAddr/GetHostByAddr.inf
AppPkg/Applications/Sockets/GetHostByDns/GetHostByDns.inf
AppPkg/Applications/Sockets/GetHostByName/GetHostByName.inf
AppPkg/Applications/Sockets/GetNameInfo/GetNameInfo.inf
AppPkg/Applications/Sockets/GetNetByAddr/GetNetByAddr.inf
AppPkg/Applications/Sockets/GetNetByName/GetNetByName.inf
AppPkg/Applications/Sockets/GetServByName/GetServByName.inf
AppPkg/Applications/Sockets/GetServByPort/GetServByPort.inf
AppPkg/Applications/Sockets/RecvDgram/RecvDgram.inf
AppPkg/Applications/Sockets/SetHostName/SetHostName.inf
AppPkg/Applications/Sockets/SetSockOpt/SetSockOpt.inf
AppPkg/Applications/Sockets/TftpServer/TftpServer.inf
AppPkg/Applications/Sockets/WebServer/WebServer.inf
Change LibraryClass dependency from DevShell to DevMedia
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16142 6f19259b-4bc3-4df7-8a09-765794883524
This adds support for executing UEFI in a QEMU/mach-virt emulated environment.
The following assumptions are made about the target:
- DRAM base at 0x4000_0000, containing the device tree blob
- DRAM size at least 1 MB
- device tree uses 64-bit physical base addresses and sizes
- ARM architected timer
- Cortex-A15 CPU (if built for 32-bit)
The following information is retrieved from the device tree:
- PL011 UART base address
- GIC base addresses
- virtual timer interrupt
- PL031 RTC base address
- DRAM size, must be at least 128 MB
- virtio MMIO transports
- PSCI 0.2 availability (for reset and poweroff)
The device tree image is relocated and installed as a configuration table
so an EFI stub enabled kernel can be booted directly without the need for
a bootloader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
This adds 2 implementations of SerialPortLib for device tree based platforms
using a PL011 UART:
- an 'early' one which is completely stateless and uses only fixed PCDs
- a normal one which takes its base address from a HOB containing the base
address discovered in the PEI phase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-with-remarks-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16140 6f19259b-4bc3-4df7-8a09-765794883524
This GUID will identify a customized HOB that carries the base address of
the PL011 serial port, for clients that cannot access PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16139 6f19259b-4bc3-4df7-8a09-765794883524
This is an implementation of ArmPlatformLib that discovers the size of system
DRAM from a device tree blob located at the address passed in
gArmTokenSpaceGuid.PcdDeviceTreeBaseAddress, which should equal the value in
gArmTokenSpaceGuid.PcdSystemMemoryBase.
As the device tree blob is passed in system DRAM, this library can only be used
if sufficient DRAM is available (>= 128 MB) and if not using shadowed NOR. The
reason for this is that it makes it easier to guarantee that such a device tree
blob at base of DRAM will not be clobbered before we get a chance to preserve it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16138 6f19259b-4bc3-4df7-8a09-765794883524
This driver enumerates the device nodes in the device tree located at the
base address passed in gArmTokenSpaceGuid.PcdDeviceTreeBaseAddress, and
installs drivers for devices it cares about (GIC interrupt controller, RTC,
architected timer interrupt)
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16137 6f19259b-4bc3-4df7-8a09-765794883524
This is a fork of the ARM PlatformPeiLib for virtual machines. The main
purpose of having this specific implementation is that it allows us to
preserve the device tree blob if it was passed to us in system DRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16136 6f19259b-4bc3-4df7-8a09-765794883524
Introduce gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeBaseAddress and
PcdDeviceTreeInitialBaseAddress, which will be used by virtual machine ports
that discover the system configuration from a flattened device tree DTB image.
The latter is FixedPcd only, and should contain the initial offset of the DTB,
the former may be declared as dynamic, and updated at runtime if the DTB is
relocated before the DXE phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16135 6f19259b-4bc3-4df7-8a09-765794883524
To allow a dynamically discovered UART base address, we parse the device
tree early and store the base address in a HOB. To prevent circular
constructor dependencies from interfering with bringing up the serial port
using this dynamic base address, use our own private HobLib with no
dependencies on DebugLib either directly or indirectly through UefiLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16134 6f19259b-4bc3-4df7-8a09-765794883524
This adds an implementation of NorFlashPlatformLib that exposes the
two 64 MB NOR flash banks that are provided by QEMU's mach-virt
emulation both in 32-bit and 64-bit mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16133 6f19259b-4bc3-4df7-8a09-765794883524
This include file contains platform specific defines, and is shared by
various modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16132 6f19259b-4bc3-4df7-8a09-765794883524
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length.
3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
Fix casts of parameters to sprintf() so that they have the correct type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Stefan Kaeser <stefankaeser@hotmail.com>
Reviewed-by: daryl.mcdaniel@intel.com
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16125 6f19259b-4bc3-4df7-8a09-765794883524
This separates PlatformPei and PlatformPeiLib so the latter can be
overridden by a specific platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16110 6f19259b-4bc3-4df7-8a09-765794883524
As this library is used in the implementation of a Runtime Service,
make sure to access dynamic PCDs only in the constructor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16108 6f19259b-4bc3-4df7-8a09-765794883524
When writing to the flash, make sure to use MmioWrite () wrappers instead
of letting the compiler generate the store instructions. This is needed
because under virtualization, store instructions with multiple outputs
(i.e., store pair or store with writeback) cannot be emulated efficiently
when operating on MMIO ranges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16107 6f19259b-4bc3-4df7-8a09-765794883524
1. Add delay after set device address and get configuration descriptor.
2. Sync the change at R15876 in XhciDxe to do not access transfer ring when endpoint is isochronous type or control type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16105 6f19259b-4bc3-4df7-8a09-765794883524
This modification adds all of the other files within the tool’s directory tree that would be a cause to rebuild the tool.
The format in the Makefile for listing these other files was selected to allow the nightly build script to detect changes in the additional files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lhauch <larry.hauch@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16103 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16100 6f19259b-4bc3-4df7-8a09-765794883524
Add the missing 'MacroDict' field in FfsInfStatement.
The issue is that BaseTools/Source/Python/GenFds/FfsInfStatement.py", line 448, in __ExtendMacro__
String = GenFdsGlobalVariable.MacroExtend(String, self.MacroDict)
AttributeError: OptRomInfStatement instance has no attribute 'MacroDict'
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16099 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16098 6f19259b-4bc3-4df7-8a09-765794883524
StdLib\
BsdSocketLib\
ns_print.c
Use "%lu" format instead of "%Lu". A capital 'L' specifies (long double) in print formats.
Add a cast from char to (unsigned int) to match its sprintf format.
res_debug.c
Use "%lu" format instead of "%Lu". A capital 'L' specifies (long double) in print formats.
EfiSocketLib\
Socket.c
Update copyright & correct formatting
Include\
sys\
EfiCdefs.h
Update copyright date
Change type of LONGN and ULONGN to INTN and UINTN, respectively.
errno.h
Update copyright date
Add enum member '__ESUCCESS = 0'
fcntl.h
Update copyright date
Improve comment for O_EXCL
stat.h
Update copyright date
Reorder the S_* flags
Put the S_* predicate macros in the same order as their flag definitions
Add a function header comment to the stat() function declaration.
errno.h
Update copyright date
Define new ESUCCESS error code
wchar.h
Update copyright date
Correct the description of the Nptr parameter to the wcstol, wcstoll, wcstoul, and wcstoull functions.
x86\float.h
Update copyright date
Define 'long double' limits for non-Microsoft compilers
LibC\
Containers\Queues\Fifo.c
Rewrite to make more robust and secure (zeros out old data)
StdLib\realpath.c
Update copyright date
Reformat descriptive comment for realpath()
Add terminating CRLF
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16096 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16092 ('ShellPkg: Add a new library for "bcfg" command') introduced a
new library class (and an instance for it) called BcfgCommandLib.
SVN r16093 ('ShellPkg: Use the new library for "bcfg" command') rebased
ShellPkg to the new library, introducing a new [LibraryClasses]
dependency.
Library classes must be resolved to library instances in client platform
descriptions (DSC's). Since OVMF is a client platform, import the same
library resolution as seen in "ShellPkg/ShellPkg.dsc" (added in SVN
r16092).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16095 6f19259b-4bc3-4df7-8a09-765794883524
This library accesses SystemTable->RuntimeServices at runtime,
which means it should take care to use its updated value after
SetVirtualAddressMap () is called.
Replace references to gRT with mRT, which we initialize to gRT
and update to its virtual value on a virtual address change event.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16091 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
Ard Biesheuvel
Daryl McDaniel
Michael Casadevall
Laszlo Ersek
Fu, Siyuan
Eric Dong
Feng Tian
Ruiyu Ni
Qiu Shumin
Stefan Kaeser
Gao, Liming
Ronald Cron
Harry Liebel
Yingke Liu
Andrew Fish
Star Zeng
lhauch
Tapan Shah
Feng, Bob C
Nikolai Saoukh
Abner Chang
Jaben Carsey