RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Function of UpdatePciInfo() in PciEnumeratorSupport.c is used to update
the bar information for those incompatible PCI device. It is the right
place to check if the OptionRom need to be ignored.
According to "Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor
Usage" in PI Spec 1.7, Type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM (do not probe option
rom BAR).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Guest Physical Address (GPA) space in Td guest is divided into private
and shared sub-spaces, determined by the SHARED bit of GPA. This PCD
holds the shared bit mask. Its default value is 0 and it will be set
in PlatformPei driver if it is of Td guest.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3886
bRefClkFreq UFS card attribute need to be read and written after successful
fDeviceInit and NOP response so that link will be stable.
Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Previous commit fixed that check in DXE, this one now for PEI.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Uncovered by commit 9dd14fc91c, which
changed the number of bits included in the Css register from 4 to 8.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The default 1s timeout can delay boot splash on some hardware with no
benefit.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
Correct the logic about whether 5-level paging is supported.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3851
When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the Manufacturer Default Value
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to the correct value.
Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved
Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3856
Currently this NvmeExpress Driver do not support metadata handling.
According to the NVME specs, metadata may be transferred to the host after
the logical block data. It can overrun the input buffer which may only
be the size of logical block data.
Add a check to return not support for the namespaces formatted with
metadata.
v2 changes:
- Change debug log level from INFO to ERROR
- Change to if (NamespaceData->LbaFormat[LbaFmtIdx].Ms != 0)
v1: https://edk2.groups.io/g/devel/message/87242
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
No need to check the interface protocol then conditionally setting,
just set it to BOOT_PROTOCOL and check for error.
This is what Linux does for HID devices as some don't follow the USB spec.
One example is the Aspeed BMC HID keyboard device, which adds a massive
boot delay without this patch as it doesn't respond to
'GetProtocolRequest'.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2668
SetMode will fail in some case. for example, without XServer.
Should handle these case when SetMode fail.
If we don't handle it, it will Segmentation fault.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries.
(tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild)
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Move the logic that stores starting PCI attributes and sets the
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute to
DriverBindingStart() before the memory that backs the
DMA engine is allocated.
This ensures that the DMA-backing memory is not forcibly allocated
below 4G in system address map. Otherwise the allocation fails on
platforms that do not have any memory below the 4G mark and the drive
initialisation fails.
Leave the PCI device enabling attribute logic in NvmeControllerInit()
to ensure that the device is re-enabled on reset in case it was
disabled via PCI attributes.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tomas Pilar <quic_tpilar@quicinc.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3417
Update the brotli submodule to the latest commit (f4153a0)
so that the build isn't broken in GCC 11 compilers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When setting mVirtualMap to NULL also set mVirtualMapMaxIndex to 0.
Without that RuntimeDriverConvertPointer() will go search the ZeroPage
for EFI_MEMORY_DESCRIPTOR entries.
In case mVirtualMapMaxIndex happens to be small small enough that'll go
unnoticed, the search will not find anything and EFI_NOT_FOUND will be
returned.
In case mVirtualMapMaxIndex is big enough the search will reach the end
of the ZeroPage and trigger a page fault.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3811
Remove ASSERT() statements that are triggered if a platform provides
an override of PCI ROM attached to a PCI Controller. The PCI Platform
Protocol allows the platform to provide a PCI ROM image for a PCI
Controller. This works for PCI Controllers that do not have an attached
PCI ROM, but the platform is not allowed to replace the PCI ROM for a
PCI Controller that has its own PCI ROM. Removing these ASSERT()
statements enables this additional use case.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Since the Variable Lock protocol is deprecated, convert locking of
PlatformRecovery#### in EfiBootManagerLoadOptionToVariable to use the
Variable Policy protocol.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3709
In EDKII implementation of variable policy, the DXE runtime agent would
communicate to MM to disable, register or query policies. However, these
operations populate the value of MessageLength that includes communicate
header to include MM communicate header, which mismatches with the
description of PI specification.
This fix will correct the MessageLength field calculation to exclude
the size of MM_COMMUNICATE_HEADER.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This changes is by adding 50ms delay during voltage switching from 3.3V to
1.8V, plus adding a goto Voltage33Retry for 3.3V checking and retrying.
Change is for Enabling OS boot from SD card through UEFI payload.
Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Only EFI_VARIABLE_NON_VOLATILE attribute is an invalid combination
of attribute bits, so update the variable driver to return
EFI_INVALID_PARAMETER so that we can prevent the invalid variable
being created.
This change also fixes the SCT failure below:
- RT.QueryVariableInfo - With being an invalid combination -- FAILURE
For details, please check the threads below:
- https://edk2.groups.io/g/devel/topic/86486174
- https://edk2.groups.io/g/devel/message/82466
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Cc: G Edhaya Chandran <edhaya.chandran@arm.com>
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Signed-off-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Read Disk does a modification of ExtMbrStartingLba with the code MultU64x32
(ExtMbrStartingLba, BlockSize) Error detection to see if ExtMbrStartingLBA
has a value of 0. This is invalid as LBA 0 = MBR. After modification, the
next time ExtMbrStartingLba is in this function if ExtMbrStartingLba is set
to 0 in the MBR it never passes the while/do evaluation It is multiplied by
0 by read disk , set to 0 by an invalid MBR and goes back to evaluation
This condition will also cause Ws19 and WS22 to hang, however Microsoft has
developed a hotfix patch that will be released in 2022
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Craig Edwards <craig.edwards@dell.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3776
Put off UFS HCS.DP (Device Attached) checking
until UfsDeviceDetection() to fix timing problem.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ian Chiu <Ian.chiu@intel.com>
Cc: Maggie Chu <maggie.chu@intel.com>
Signed-off-by: VincentX Ke <vincentx.ke@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3775
Refactoring UFS DME request function and retry up to 5 times.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ian Chiu <Ian.chiu@intel.com>
Cc: Maggie Chu <maggie.chu@intel.com>
Signed-off-by: VincentX Ke <vincentx.ke@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3714
Replace with UFS_UNIT_DESC to fix response timeout problem.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ian Chiu <Ian.chiu@intel.com>
Cc: Maggie Chu <maggie.chu@intel.com>
Signed-off-by: VincentX Ke <vincentx.ke@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before trying to access parent root port to check ARI capabilities,
enumerator should see if Endpoint device is not Root Complex integrated
to avoid undefined parent register accesses.
Signed-off-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
gcc-11 (fedora 35):
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c: In function ?UsbIoBulkTransfer?:
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c:277:12: error: ?UsbHcBulkTransfer? accessing 80 bytes in a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When use the UsbHcAllocMemFromBlock() and UsbHcFreeMem() to allocate
memory and free memory for the UHC, it should use the corresponding host
address but not the pci bus address.
Signed-off-by: jdzhang <jdzhang@zd-tech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdeModulePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
SmmBootRecordDataSize is initialized in InternalGetSmmPerData,
but this function may fail. so to avoid using SmmBootRecordDataSize
without intialization, set it to 0 at first.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3749
Update package YAML files to ignore ECC errors that are
already present. These issues must be fixed in the future,
but should not block source code changes for these known
issues.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2957
1. Allocate performance data table at EndOfDxe and then lock the varible
which store the table address at EndOfDxe.
2. Enlarge PCD gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize
from 0x20000 to 0x30000 in order to hold the Delta performance data
between EndOfDxe and ReadyToBoot.
3. SMM performance data is collected by DXE modules through SMM communication
at ReadyToBoot before.
Now to do SMM communication twice, one for allocating the performance
size at EndOfDxe, another is at ReadyToBoot to get SMM performance data.
4. Make SmmCorePerformanceLib rather than FirmwarePerformanceSmm to communicate
with DxeCorePerformanceLib for SMM performance data and size.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3699
The code in MdeModulePkg\Library\DxeCapsuleLibFmp call the deprecated=20
interface VariableLockRequestToLock.c. So I changed the code in
FmpDevicePkg using RegisterBasicVariablePolicy, instead of the=20
deprecated interface.
Signed-off-by: Yang Jie <jie.yang@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3703
MMIO base address size will overflow while finding two or more Host
controller in the system. Correct it and support 32 and 64 bits address
space.
Signed-off-by: Ian Chiu <ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Maggie Chu <maggie.chu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Enhance RelocateCapsuleToRam() to skip creation of the Capsule on Disk
file name capsule if PcdSupportUpdateCapsuleReset feature is not enabled.
This avoids an EFI_UNSUPPORTED return status from UpdateCapsule() when the
file name capsule is encountered and PcdSupportUpdateCapsuleReset is FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If S.M.A.R.T. is supported, it can be checked.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
Use DEBUG_LINE_NUMBER instead of __LINE__.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Tested-by: Michael Kubacki <michael.kubacki@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3662
Two DEBUG macros in XhciDxe/XhciSched.c are missing the argument
that should be passed for the print specifier.
In addition, this change updates the print level to "DEBUG_ERROR"
and prints the status as well.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When using will_return() on a pointer value, it must be
cast to UINTN to be compatible with 32-bit GCC builds.
This uses the same approach in samples provided in the
UnitTestFramworkPkg when passing pointer values to
UT_ASSERT_EQUAL().
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3675
Use QuickSort instead of QuickSortWorker
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: IanX Kuo <ianx.kuo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3680
This patch fixes the following issue:
The global variable gHandleList is a linked list.
This list is locked when a entry is added or removed from the list,
but there is no lock when iterating this list in function
CoreValidateHandle().
It can lead to "Handle.c (76): CR has Bad Signature" assertion if the
iterated entry in the list is just removed by other task during iterating.
Currently some caller functions of CoreValidateHandle() have
CoreAcquireProtocolLock(), but some caller functions of
CoreValidateHandle() do not CoreAcquireProtocolLock().
Add CoreAcquireProtocolLock() always when CoreValidateHandle() is called,
Also, A lock check is added in the CoreValidateHandle().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add correct content to the 'SdDxeExtra.uni' file.
Include 'EmmcDxeExtra.uni' and 'SdDxeExtra.uni' files to their
appropriate INF files.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3666
Currently, CoreLocateHandleBuffer() follows three steps:
1) get the size of protocol database firstly
2) allocate the buffer based on the size
3) get the protocol database into the buffer
There is no lock protection for the whole three steps. If a new protocol
added in step 2) by other task, e.g. (event timer handle USB device
hotplug). The size of protocol database may be increased and cannot fit
into the previous buffer in step 3). The protocol database cannot be
returned successfully, EFI_BUFFER_TOO_SMALL error will be returned.
This patch adds the lock to protect the whole three steps.
It can make sure the correct protocol database be returned.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi dandan.bi@intel.com
Reviewed-by: Liming Gao gaoliming@byosoft.com.cn
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3629
SMM Communication PPI GUID from MdeModulePkg is defined the same as MM
Communication PPI GUID from MdePkg, according to PI Spec v1.5 and onward.
After introduction of MM Communication PPI definitions, an update in the
ignore duplicate list is needed to avoid breaking CI build.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Min Xu
Bandaru, Purna Chandra Rao
Mara Sophie Grosch via groups.io
Sean Rhodes
Lou, Yun
Ma, Hua
Guomin Jiang
Xiaolu.Jiang
Tomas Pilar
Bob Feng
Matt DeVillier
Gerd Hoffmann
Michael D Kinney
Rebecca Cran
Kun Qin
Aiman Rosli
Sunny Wang
Edwards, Craig
Ke, VincentX
Ray Ni
jdzhang
Michael Kubacki
wenyi,xie via groups.io
Liming Gao
Dandan Bi
Yang Jie
Ian Chiu
Bob Morgan
IanX Kuo
Konstantin Aladyshev