This patch enables PciHostBridgeDxe driver to use Platform IoMMU detection
library to ensure that PciHostBridgeDxe is run after platform IoMmuDxe
driver has checked whether platform need to install IOMMU protocol provider.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Current QemuFwCfgLib.inf is used in both Pei and Dxe phases. Add Pei
and Dxe inf file to provide a seperate QemuFwCfgLib instances for Pei
and Dxe phases.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
Due to security reasons all DMA operations inside the SEV guest must
be performed on shared (i.e unencrypted) pages. The IOMMU protocol
driver for the SEV guest uses a bounce buffer to map guest DMA buffer
to shared pages inorder to provide the support for DMA operations inside
SEV guest.
IoMmuDxe driver looks for SEV capabilities, if present then it installs
the real IOMMU protocol otherwise it installs placeholder protocol.
Currently, PciHostBridgeDxe and QemuFWCfgLib need to know the existance
of IOMMU protocol. The modules needing to know the existance of IOMMU
support should add
gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid
in their depex to ensure that platform IOMMU detection has been performed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled, the MMIO memory range must be mapped as unencrypted
(i.e C-bit cleared).
We need to clear the C-bit for MMIO GCD entries in order to cover the
ranges that were added during the PEI phase (through memory resource
descriptor HOBs). Additionally, the NonExistent ranges are processed
in order to cover, in advance, MMIO ranges added later in the DXE phase
by various device drivers, via the appropriate DXE memory space services.
The approach is not transparent for later addition of system memory ranges
to the GCD memory space map. (Such ranges should be encrypted.) OVMF does
not do such a thing at the moment, so this approach should be OK.
The driver is being added to the APRIORI DXE file so that, we clear the
C-bit from MMIO regions before any driver accesses it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Secure Encrypted Virtualization (SEV) guest VMs have the concept of
private and shared memory. Private memory is encrypted with the
guest-specific key, while shared memory may be encrypted with hypervisor
key. Certain types of memory (namely instruction pages and guest page
tables) are always treated as private memory by the hardware.
For data memory, SEV guest VMs can choose which pages they would like
to be private. The choice is done using the standard CPU page tables
using the C-bit. When building the initial page table we mark all the
memory as private.
The patch sets the memory encryption PCD. The PCD is consumed by the
following edk2 modules, which manipulate page tables:
- PEI phase modules: CapsulePei, DxeIplPeim, S3Resume2Pei.
CapsulePei is not used by OVMF. DxeIplPeim consumes the PCD at the
end of the PEI phase, when it builds the initial page tables for the
DXE core / DXE phase. S3Resume2Pei does not consume the PCD in its
entry point function, only when DxeIplPeim branches to the S3 resume
path at the end of the PEI phase, and calls S3Resume2Pei's
EFI_PEI_S3_RESUME2_PPI.S3RestoreConfig2() member function.
Therefore it is safe to set the PCD for these modules in PlatformPei.
- DXE phase modules: BootScriptExecutorDxe, CpuDxe, PiSmmCpuDxeSmm.
They are all dispatched after the PEI phase, so setting the PCD for
them in PlatformPei is safe. (BootScriptExecutorDxe is launched "for
real" in the PEI phase during S3 resume, but it caches the PCD into a
static variable when its entry point is originally invoked in DXE.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Add Secure Encrypted Virtualization (SEV) helper library.
The library provides the routines to:
- set or clear memory encryption bit for a given memory region.
- query whether SEV is enabled.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled then we must unroll the rep String I/O instructions.
The patch updates dsc file to use SEV version of IoLib inf. The main
difference between BaseIoLibIntrinsic.inf and BaseIoLibIntrinsicSev.inf
is, SEV version checks if its running under SEV enabled guest, If so
then it unroll the String I/O (REP INS/OUTS) otherwise fallbacks to
rep ins/outs.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We can now make PcdQ35TsegMbytes dynamic, in preparation for the extended
TSEG size feature. At the moment we only move the declaration in
OvmfPkg.dec from [PcdsFixedAtBuild] to [PcdsDynamic, PcdsDynamicEx], and
provide the dynamic defaults (with the same value, 8) in the DSC files if
SMM_REQUIRE is TRUE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Xen gained support for the 4MB flash image in Xen commit 0d6968635ce5
("hvmloader: avoid tests when they would clobber used memory",
2017-05-19), which is part of Xen 4.9.0-rc6.
The previously default 2MB can be explicitly selected with
-D FD_SIZE_2MB
or
-D FD_SIZE_IN_KB=2048
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit bba8dfbec3)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: reference Xen commit in commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=559
The XCODE5 tool chain has a FAMILY of GCC. The
GCC statements in the [BuildOptions] section add
flags that are not compatible with XCODE5. Add
empty XCODE5 statements in [BuildOptions] sections
to prevent the use of the GCC flags in XCODE5
builds.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the previous patch we had to add two explicit Null resolutions, but
here we can remove five PeiPcdLib ones, after setting the default to it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently the default (module type independent) PcdLib resolution is to
BasePcdLibNull.inf, which is inherited by all PEIMs. In the next patch,
we'll flip the PEIM default resolution to PeiPcdLib.inf, but in order to
keep that patch both correct and simple to review, we should spell out the
Null resolution for those two PEIMs (ReportStatusCodeRouterPei and
StatusCodeHandlerPei) that are now the only ones that don't specify an
explicit resolution.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
For the emulated variable store, PlatformPei allocates reserved memory (as
early as possible, so that the address remains the same during reboot),
and PcdEmuVariableNvStoreReserved carries the address to
EmuVariableFvbRuntimeDxe.
However, EmuVariableFvbRuntimeDxe is excluded from the SMM_REQUIRE build,
and then noone consumes PcdEmuVariableNvStoreReserved. Don't waste
reserved memory whenever that's the case.
(Even a dynamic default for PcdEmuVariableNvStoreReserved would be
unnecessary; but that way the PcdSet64S() call in the
ReserveEmuVariableNvStore() function doesn't compile.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"MdeModulePkg/MdeModulePkg.dec" declares PcdVariableStoreSize like this:
> The size of volatile buffer. This buffer is used to store VOLATILE
> attribute variables.
There is no inherent reason why the size of the volatile variable store
should match the same of the non-volatile variable store. Indeed flash
variables in the 4MB build work fine without this equality.
However, OvmfPkg/EmuVariableFvbRuntimeDxe uses PcdVariableStoreSize to
initialize the non-volatile VARIABLE_STORE_HEADER too. (Presumably based
on the fact that ultimately that storage will not be permanent.) When
using EmuVariableFvbRuntimeDxe in the 4MB build, the mismatch between the
two mentioned PCDs (which is apparent through EmuVariableFvbRuntimeDxe's
VARIABLE_STORE_HEADER) triggers an assertion in the variable driver:
> ASSERT MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c(3772):
> mNvVariableCache->Size == VariableStoreLength
Bringing PcdVariableStoreSize in sync with PcdFlashNvStorageVariableSize
fixes this. It also happens to ensure a volatile store size in the 4MB
build that equals the non-volatile store size, which likely doesn't hurt
for symmetry.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: b24fca0575
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This PCD is no longer used.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This reverts commit bba8dfbec3.
The 264KB size introduced for the NV spare area in commit b24fca0575
("OvmfPkg: introduce 4MB flash image (mainly) for Windows HCK",
2017-04-29) breaks the "-bios" (emulated varstore) use case. Until we sort
that out, revert the default build to the 2MB image.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The previously default 2MB can be explicitly selected with
-D FD_SIZE_2MB
or
-D FD_SIZE_IN_KB=2048
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "ConfirmSetOfLargeVariable" test case of the Secure Boot Logo Test
("Microsoft.UefiSecureBootLogo.Tests") suite in the Microsoft Hardware
Certification Kit sets a 32 KB large non-authenticated variable.
In the FD_SIZE_4MB build, our live varstore is now 256 KB big, so we can
accommodate this. Set both PcdMaxVariableSize and PcdMaxAuthVariableSize
to 0x8400 -- beyond DataSize=0x8000 from the HCK test, we need some room
for the variable name and attributes as well.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "Confirm64KilobytesOfUnauthenticatedVariableStorage" test case of the
Secure Boot Logo Test ("Microsoft.UefiSecureBootLogo.Tests") suite in the
Microsoft Hardware Certification Kit expects to be able to populate the
variable store up to roughly 64 KB, with a series of 1 KB sized,
unauthenticated variables. OVMF's current live varstore area is too small
for this: 56 KB.
Introduce the FD_SIZE_4MB build macro (equivalently, FD_SIZE_IN_KB=4096),
which
- enlarges the full flash image to 4MB -- QEMU supports up to 8MB, see
FLASH_MAP_BASE_MIN in "hw/i386/pc_sysfw.c" --,
- inside that, grows the varstore area / pflash chip to 528 KB, and within
it, the live area from 56 KB to 256 KB.
Importantly, a firmware binary built with -D FD_SIZE_4MB will *not* be
compatible with a variable store that originates from a variable store
template built *without* -D FD_SIZE_4MB. This is the reason for the large
increase, as every such change breaks compatibility between a new firmware
binary and old varstore files.
Enlarging the varstore does not impact the performance of normal
operations, as we keep the varstore block size 4KB. The performance of
reclaim is affected, but that is expected (since reclaim has to rework the
full live area). And, reclaim occurs proportionally less frequently.
While at it, the FVMAIN_COMPACT volume (with the compressed FFS file in
it) is also enlarged significantly, so that we have plenty of room for
future DXEFV (and perhaps PEIFV) increments -- DXEFV has been growing
steadily, and that increase shows through compression too. Right now the
PEIFV and DXEFV volumes need no resizing.
Here's a summary:
Description Compression type Size [KB]
------------------------- ----------------- ----------------------
Non-volatile data storage open-coded binary 128 -> 528 ( +400)
data
Variable store 56 -> 256 ( +200)
Event log 4 -> 4 ( +0)
Working block 4 -> 4 ( +0)
Spare area 64 -> 264 ( +200)
FVMAIN_COMPACT uncompressed 1712 -> 3360 (+1648)
FV FFS file LZMA compressed
PEIFV uncompressed 896 -> 896 ( +0)
individual PEI uncompressed
modules
DXEFV uncompressed 10240 -> 10240 ( +0)
individual DXE uncompressed
modules
SECFV uncompressed 208 -> 208 ( +0)
SEC driver
reset vector code
For now, the 2MB flash image remains the default.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
FD_SIZE_xMB defines have existed for flash size selection. They can be
passed as "-D FD_SIZE_xMB" on the command line. Passing multiple of them
at the same time has never been supported; earlier settings on the command
line cannot be overridden.
Introduce the integer valued FD_SIZE_IN_KB macro, which provides the
following improvements:
- several instances of it are permitted on the command line, with the last
one taking effect,
- conditional statements in the DSC and FDF files need only check a single
macro, and multiple values can be checked in a single !if with the ||
operator,
- nested !ifdef / !else ladders can be replaced with flat equality tests,
- in the future, flash sizes can be expressed with a finer than MB
granularity, if necessary.
For now, we're going to preserve the FD_SIZE_xMB defines as convenience
wrappers for FD_SIZE_IN_KB.
FD_SIZE_IN_KB is being added to the DSC files because this way we can
depend on it in both the DSC and FDF files.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QemuFwCfgS3Enabled() in "OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c"
queries the "etc/system-states" fw_cfg file.
The same implementation is now available factored-out in
"OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3PeiDxe.c". It is available to
PEIMs through the PeiQemuFwCfgS3LibFwCfg instance, and to DXE_DRIVER and
DXE_RUNTIME_DRIVER modules through the DxeQemuFwCfgS3LibFwCfg instance.
Resolve QemuFwCfgS3Lib accordingly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The OpensslLibCrypto library instance (which does not contain libssl
functions) is sufficient for the Secure Boot feature.
Ease security analysis by excluding libssl functionality from the
OpensslLib instance we use with TLS_ENABLE=FALSE.
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tomas Hoger <thoger@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Move the platform-specific default values for these PCDs from the
[PcdsFixedAtBuild] / [PcdsFixedAtBuild.X64] sections to the
[PcdsDynamicDefault] section.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2
* Move the setting above the "!ifndef $(USE_OLD_SHELL)" part.
* Un-indent the setting to column zero.
(Comments from Laszlo)
Overwrite the value of PcdAllowHttpConnections to allow HTTP
connections if HTTP Boot enabled (-D HTTP_BOOT_ENABLE).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
This commit introduces a new build option, TLS_ENABLE, to pull in the
TLS-related modules. If HTTP_BOOT_ENABLE and TLS_ENABLE are enabled at
the same time, the HTTP driver locates the TLS protocols automatically
and thus HTTPS is enabled.
To build OVMF with HTTP Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE
To build OVMF with HTTPS Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE -D TLS_ENABLE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Always use IScsiDxe from NetworkPkg when IPv6 is enabled since it provides
the complete ISCSI support.
NOTE: This makes OpenSSL a hard requirement when NETWORK_IP6_ENABLE is
true.
(Based on Jiaxin's suggestion)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This commit provides unconditional library resolutions for the OpenSslLib,
IntrinsicLib and BaseCryptLib classes, regardless of whether those classes
are actually used by any module.
Although those libraries depends on OpenSSL, they won't be built unless
a module really uses them. Thus, missing OpenSSL from the tree won't
cause any build failure as long as SECURE_BOOT_ENABLE is false.
(Based on Jiaxin's patch and Laszlo's suggestion)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
While debugging OS for ACPI BGRT support (especially on VMs),
it is very useful to have the EFI firmware (OVMF in most cases
which use Tianocore) to export the ACPI BGRT table.
This patch tries to add this support in OvmfPkg.
Tested this patch in the following environments:
1. On both RHEL7.3 and Fedora-25 VM guests running on a Fedora-24 Host:
- Ensured that the BGRT logo is properly prepared and
can be viewed with user-space tools (like 'Gwenview' on KDE,
for example):
$ file /sys/firmware/acpi/bgrt/image
/sys/firmware/acpi/bgrt/image: PC bitmap, Windows 3.x format, 193 x
58 x 24
2. On a Windows-10 VM Guest running on a Fedora-24 Host:
- Ensured that the BGRT ACPI table is properly prepared and can be
read with freeware tool like FirmwareTablesView:
==================================================
Signature : BGRT
Firmware Provider : ACPI
Length : 56
Revision : 1
Checksum : 129
OEM ID : INTEL
OEM Table ID : EDK2
OEM Revision : 0x00000002
Creator ID : 0x20202020
Creator Revision : 0x01000013
Description :
==================================================
Note from Laszlo Ersek <lersek@redhat.com>: without the BGRT ACPI table,
Windows 8 and Windows 10 first clear the screen, then display a blue,
slanted Windows picture above the rotating white boot animation. With the
BGRT ACPI table, Windows 8 and Windows 10 don't clear the screen, the blue
Windows image is not displayed, and the rotating white boot animation is
shown between the firmware's original TianoCore boot splash and (optional)
"Start boot option" progress bar.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: cover effect on Windows 8/10 boot anim. in commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
LzmaCustomDecompressLib and PeiDxeDebugLibReportStatusCode were copied
from IntelFrameworkModulePkg to MdeModulePkg, but the originals were
kept for compatibility.
Since the libraries are identical, move OvmfPkg to use the MdeModulePkg
versions instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These settings will allow CpuMpPei and CpuDxe to wait for the initial AP
check-ins exactly as long as necessary.
It is safe to set PcdCpuMaxLogicalProcessorNumber and
PcdCpuApInitTimeOutInMicroSeconds in OvmfPkg/PlatformPei.
OvmfPkg/PlatformPei installs the permanent PEI RAM, producing
gEfiPeiMemoryDiscoveredPpiGuid, and UefiCpuPkg/CpuMpPei has a depex on
gEfiPeiMemoryDiscoveredPpiGuid.
It is safe to read the fw_cfg item QemuFwCfgItemSmpCpuCount (0x0005). It
was added to QEMU in 2008 as key FW_CFG_NB_CPUS, in commit 905fdcb5264c
("Add common keys to firmware configuration"). Even if the key is
unavailable (or if fw_cfg is entirely unavailable, for example on Xen),
QemuFwCfgRead16() will return 0, and then we stick with the current
behavior.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
One of the following patches will change QemuVideoDxe driver
to use the new FrameBufferLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek at redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
At this stage, the driver builds, and suffices for testing binding and
unbinding.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the Platform Init v1.4a spec,
- Volume 1 "4.7 Status Code Service" defines the
EFI_PEI_SERVICES.ReportStatusCode() service,
- Volume 1 "6.3.5 Status Code PPI (Optional)" defines the
EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above),
- Volume 2 "14.2 Status Code Runtime Protocol" defines the
EFI_STATUS_CODE_PROTOCOL.
These allow PEIMs and DXE (and later) modules to report status codes.
Currently OvmfPkg uses modules from under
"IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above
abstractions (PPI and PROTOCOL) directly, and write the status codes, as
they are reported, to the serial port or to a memory buffer. This is
called "handling" the status codes.
In the Platform Init v1.4a spec,
- Volume 3 "7.2.2 Report Status Code Handler PPI" defines
EFI_PEI_RSC_HANDLER_PPI,
- Volume 3 "7.2.1 Report Status Code Handler Protocol" defines
EFI_RSC_HANDLER_PROTOCOL.
These allow several PEIMs and runtime DXE drivers to register callbacks
for status code handling.
MdeModulePkg offers a PEIM under
"MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both
EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE
driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe"
that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL.
MdeModulePkg also offers status code handler modules under
MdeModulePkg/Universal/StatusCodeHandler/ that depend on
EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively.
The StatusCodeHandler modules register themselves with
ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI /
EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code
through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches
the phase-matching ReportStatusCodeRouter module first, which in turn
passes the status code to the pre-registered, phase-matching
StatusCodeHandler module.
The status code handling in the StatusCodeHandler modules is identical to
the one currently provided by the IntelFrameworkModulePkg modules. Replace
the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can
decrease our dependency on IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Suggested-by: Liming Gao <liming.gao@intel.com>
Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63
[jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos]
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
In the next patch we're going to put EFI_PEI_MP_SERVICES_PPI to use.
CpuMpPei uses the following PCDs from gUefiCpuPkgTokenSpaceGuid, beyond
those already used by CpuDxe:
- PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize: these
control whether CpuMpPei performs microcode update. If the region size
is zero, then the microcode update is skipped. UefiCpuPkg.dec sets the
region size to zero by default, which is appropriate for OVMF.
- PcdCpuApLoopMode and PcdCpuApTargetCstate: the former controls how
CpuMpPei puts the APs to sleep: 1 -- HLT, 2 -- MWAIT, 3 -- busy wait
(with PAUSE). The latter PCD is only relevant if the former PCD is 2
(MWAIT). In order to be consistent with SeaBIOS and with CpuDxe itself,
we choose HLT. That's the default set by UefiCpuPkg.dec.
Furthermore, although CpuMpPei could consume SecPeiCpuExceptionHandlerLib
technically, it is supposed to consume PeiCpuExceptionHandlerLib. See:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/12703
- git commit a81abf1616 ("UefiCpuPkg/ExceptionLib: Import
PeiCpuExceptionHandlerLib module"), part of the series linked above.
Jeff recommended to resolve CpuExceptionHandlerLib to
PeiCpuExceptionHandlerLib for all PEIMs:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/14471/focus=14477
Since at the moment we have no resolution in place that would cover this
for PEIMs (from either [LibraryClasses] or [LibraryClasses.common.PEIM]),
it's easy to do.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
After IncompatiblePciDeviceSupportDxe, this is another small driver /
protocol implementation that tweaks the behavior of the PCI bus driver in
edk2.
The protocol is specified in the Platform Init Spec v1.4a, Volume 5,
Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This
implementation steers the PCI bus driver to reserve the following
resources ("padding") for each PCI bus, in addition to the BARs of the
devices on that PCI bus:
- 2MB of 64-bit non-prefetchable MMIO aperture,
- 512B of IO port space.
The goal is to reserve room for devices hot-plugged at runtime even if the
bridge receiving the device is empty at boot time.
The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is
actually only 1/8th of the PCI spec mandated reservation, but the
specified size of 4096 has proved wasteful (given the limited size of our
IO port space -- see commit bba734ab4c). Especially on Q35, where every
PCIe root port and downstream port qualifies as a separate bridge (capable
of accepting a single device).
Test results for this patch:
- regardless of our request for 64-bit MMIO reservation, it is downgraded
to 32-bit,
- although we request 512B alignment for the IO port space reservation,
the next upstream bridge rounds it up to 4096B.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The Driver Health HII menu is not an integral part of the MdeModulePkg BDS
driver / UI app. Because we abandoned the IntelFrameworkModulePkg BDS, now
we have to get the same functionality explicitly from
DriverHealthManagerDxe.
Suggested-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The default stack size (from UefiCpuPkg/UefiCpuPkg.dec) is 8KB, which
proved too small (i.e., led to stack overflow) across commit range
98c2d9610506^..f85d3ce2efc2^, during certificate enrollment into "db".
As the edk2 codebase progresses and OVMF keeps including features, the
stack demand constantly fluctuates; double the SMM stack size for good
measure.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/12864
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1341733
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the course of porting OvmfPkg to the MdeModulePkg BDS, commit
817fb3ac2a
OvmfPkg/PlatformBootManagerLib: Add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 817fb3ac2a, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to edk2 commit
"MdeModulePkg/PciBus: do not improperly degrade resource"
and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the
Platform Init 1.4a specification, a platform can provide such a protocol
in order to influence the PCI resource allocation performed by the PCI Bus
driver.
In particular it is possible instruct the PCI Bus driver, with a
"wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit
address space, regardless of whether the device features an option ROM.
(By default, the PCI Bus driver considers an option ROM reason enough for
allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if
BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS
binary from a combined option ROM could be dispatched, and fail to access
MMIO BARs in 64-bit address space.)
In platform code we can ascertain whether a CSM is present or not. If not,
then legacy BIOS binaries in option ROMs can't be dispatched, hence the
BAR degradation is detrimental, and we should prevent it. This is expected
to conserve the 32-bit address space for 32-bit MMIO BARs.
The driver added in this patch could be simplified based on the following
facts:
- In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence
the driver will exit immediately. Therefore the driver could be omitted
from the Ia32 build.
- In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE
was defined (because in that case the degradation would be justified).
On the other hand, if CSM_ENABLE was undefined, then the driver could be
included, and it could provide the hint unconditionally (without looking
for the Legacy BIOS protocol).
These short-cuts are not taken because they would increase the differences
between the OVMF DSC/FDF files. If we can manage without extreme
complexity, we should use dynamic logic (vs. build time configuration),
plus keep conditional compilation to a minimum.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reasons:
- USE_OLD_BDS requires duplicating updates between OVMF's library
instances that depend on USE_OLD_BDS being FALSE vs. TRUE. Examples:
d5aee61bfa OvmfPkg/QemuNewBootOrderLib: adapt Q35 SATA PMPN to UEFI
spec Mantis 1353
1da7616649 OvmfPkg/QemuBootOrderLib: adapt Q35 SATA PMPN to UEFI spec
Mantis 1353
- The Xen community has embraced the new BDS. Examples:
14b2ebc30c OvmfPkg/PlatformBootManagerLib: Postpone the shell
registration
49effaf26e OvmfPkg/PciHostBridgeLib: Scan for root bridges when
running over Xen
- OVMF doesn't build with "-D USE_OLD_BDS -D HTTP_BOOT_ENABLE" anyway, as
NetworkPkg/HttpBootDxe now requires UefiBootManagerLib:
50a65824c7 NetworkPkg: Use UefiBootManagerLib API to create load
option.
We (correctly) don't resolve UefiBootManagerLib when USE_OLD_BDS is
TRUE.
- The new BDS has been working well; for example it's the only BDS
available in ArmVirtPkg:
1946faa710 ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Make PcdPciIoBase and PcdPciIoSize dynamic PCDs, and set them in
MemMapInitialization(), where we produce our EFI_RESOURCE_IO descriptor
HOB. (The PCD is consumed by the core PciHostBridgeDxe driver, through our
PciHostBridgeLib instance.)
Take special care to keep the GCD IO space map unchanged on all platforms
OVMF runs on.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
The RamDiskDxe driver in MdeModulePkg now will use EFI_ACPI_TABLE_PROTOCOL
and EFI_ACPI_SDT_PROTOCOL during reporting RAM disks to NVDIMM Firmware
Interface Table (NFIT).
A Pcd 'PcdInstallAcpiSdtProtocol' controls whether the
EFI_ACPI_SDT_PROTOCOL will be produced. Its default value is set to FALSE
in MdeModulePkg. To make the NFIT reporting feature working properly under
OVMF, the patch will set the Pcd to TRUE in OVMF DSC files.
Also, the RamDiskDxe driver will sometimes report a NVDIMM Root Device
using ASL code which is put in a Secondary System Description Table (SSDT)
according to the ACPI 6.1 spec.
Locating the SSDT requires modifying the [Rule.Common.DXE_DRIVER] field in
OVMF FDF files.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Brijesh Singh
Laszlo Ersek
Michael Kinney
Jiaxin Wu
Gary Lin
Bhupesh Sharma
Leif Lindholm
Jiewen Yao
Bruce Cran
Ruiyu Ni
Jeff Fan
Cinnamon Shia
Bruce Cran
Hao Wu