https://bugzilla.tianocore.org/show_bug.cgi?id=565
Fix NASM compatibility issues with XCODE5 tool chain.
The XCODE5 tool chain for X64 builds using PIE (Position
Independent Executable). For most assembly sources using
PIE mode does not cause any issues.
However, if assembly code is copied to a different address
(such as AP startup code in the MpInitLib), then the
X64 assembly source must be implemented to be compatible
with PIE mode that uses RIP relative addressing.
The specific changes in this patch are:
* Use LEA instruction instead of MOV instruction to lookup
the addresses of functions.
* The assembly function RendezvousFunnelProc() is copied
below 1MB so it can be executed as part of the MpInitLib
AP startup sequence. RendezvousFunnelProc() calls the
external function InitializeFloatingPointUnits(). The
absolute address of InitializeFloatingPointUnits() is
added to the MP_CPU_EXCHANGE_INFO structure that is passed
to RendezvousFunnelProc().
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Because we will always borrow the AP reset vector space for AP waking up. We
needn't allocate such range to prevent other module to use it. It could simply
the code.
https://bugzilla.tianocore.org/show_bug.cgi?id=500
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If APs are waken up by INIT-SIPI-SIPI command, they will lose original local
APIC timer setting. As a result, the timer library instance based on local APIC
timer cannot work on APs function.
This fix is to save BSP's local APIC timer settings before waking up APs and
to sync to APs when APs wakeup by INIT-SIPI-SIPI command.
Setting BSP's current counter to AP's initial counter could make sure BSP and
APs have same counter value across BSP switching.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The current DxeDebugAgentLib supports source debugging on AP function. This
update is to update DxeMpInitLib to consume Debug Agent Library by
DEBUG_AGENT_INIT_DXE_AP flag. Thus, we could source debugging AP function
invoked by CPU MP Protocol.
However, current SecPeiDebugAgentLib does not support source debugging on AP
function invoked by CPU MP PPI. I have submitted one bugzilla to add this
support at https://bugzilla.tianocore.org/show_bug.cgi?id=308.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add one semaphore to make sure BSP to wait till all APs run in AP safe loop
code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
For long mode DXE, we will disable paging on AP to protected mode to execute AP
safe loop code in reserved memory range under 4GB. But we forget to allocate
stack for AP under 4GB and AP still are using original AP stack. If original AP
stack is larger than 4GB, it cannot be used after AP is transferred to protected
mode. Besides MwaitSupport == TRUE, AP stack is still required during phase of
disabling paging in long mode DXE.
Moreover, even though AP stack is always under 4GB (a) in Ia32 DXE and (b) with
this patch, after transferring to protected mode from X64 DXE, AP stack
(in BootServiceData) maybe crashed by OS after Exit Boot Service event.
This fix is to allocate reserved memory range under 4GB together with AP safe
loop code. APs will switch to new stack in safe loop code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
The cached "CPU_INFO_IN_HOB.ApTopOfStack" field currently has type UINT32.
This is not ideal because the AP stacks are located within
"CpuMpData->Buffer", which is allocated with a plain AllocatePages() call
in MpInitLibInitialize():
platform CpuMpPei included PEI RAM > 4GB result
-------- ----------------- ------------- ------
Ia32 * n/a good
Ia32X64 no n/a BAD
Ia32X64 yes n/a good
X64 no * BAD
X64 yes no good
X64 yes yes BAD
- If we are on an Ia32X64 or X64 platform that does not include CpuMpPei,
then CpuDxe cannot reuse the CPU_INFO_IN_HOB structures preallocated by
CpuMpPei (through the CpuInitMpLib GUID HOB), and then AllocatePages()
-- invoked first in 64-bit DXE -- could return an address outside of
32-bit address space.
- If we are on an X64 platform where the permanent PEI RAM extends above
the 32-bit address space, then the same issue can surface even if
CpuMpPei is included: even the original allocation of the
CPU_INFO_IN_HOB structures, by CpuMpPei, could be satisfied from above
4GB.
The original "AP init" branch in "X64/MpFuncs.nasm" correctly considers a
64-bit stack start: the "MP_CPU_EXCHANGE_INFO.StackStart" field has type
UINTN, and the code uses QWORD addition and movement to set RSP from it.
Adapt the "GetApicId" branch of "X64/MpFuncs.nasm":
- change the type of "CPU_INFO_IN_HOB.ApTopOfStack" to UINT64,
- remove the explicit truncation to UINT32 in InitializeApData(),
- update the "GetNextProcNumber" iteration size to the new size of
"CPU_INFO_IN_HOB",
- set RSP with a QWORD movement from "CPU_INFO_IN_HOB.ApTopOfStack".
Because the same CPU_INFO_IN_HOB structure is used by "Ia32/MpFuncs.nasm",
we have to update the "GetNextProcNumber" iteration size there as well.
The ESP setting can be preserved as a DWORD movement from the original
offset (decimal 12), since our integers are little endian.
Cc: Jeff Fan <jeff.fan@intel.com>
Fixes: 845c5be1fd
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When BSP switched, we need to update some AP information. For example,
ApStartupSignalBuffer and ApTopOfStack.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Currently, MpInitLib will program AP stack in dynamic address. Each processor
will calculate its stack address by adding stack size based on the last stack
address. That means AP may have the different stack address everytime it is
wakeup by INIT-SIPI-SIPI.
When all APs have wakeup to execute AP task, each each has been assigned one
stack address. Once the timeout happened on some of APs, BSP will send INIT-
SIPI-SIPI to wake up APs. We need to re-assign stack for APs. Based on the
current implementation, we might assign one stack address used by other APs.
It will cause the unexpected stack overlapped issue.
This fix changed the stack assignment policy. We will record the stack address
assigned to AP at first time AP wakeup. When AP failed on AP task, BSP could
reassigned the same stack for it.
Getting initial APIC ID in assembly code could help AP to get saved its stack
address.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some CPU information (InitialApicId/ApicId/Health) are duplicated in CPU_AP_DATA
and CPU_INFO_IN_HOB.
This update is to remove the ones from CPU_AP_DATA and update MpInitLib to
consume the ones from CPU_INFO_IN_HOB.
V2:
Fixed potential un-initialized variable issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Just move BackupAndPrepareWakeupBuffer() and RestoreWakeupBuffer() from
PeiMpLib.c to MpLib.c.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
It will be used by DxePeiLib also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Register Exit Boot Service callback function MpInitExitBootServicesCallback() to
place AP one safe loop before hand-off to OS.
Allocated one reserved memory and copy the AsmRellocateApLoop() code into it. It
could avoid the CPU Dxe driver (located in Boot Service data range) crashed
after Exit Boot Service event.
Place AP into the target Cx-State (specified by PcdCpuApTargetCstate) could save
power if Monitor-mwait feature supported.
In long mode, switch AP into protected mode could let AP not require page table
when executing this safe loop. Page Table (located in Boot Service data range)
may crashed after Exit Boot Service event.
v3:
1. Rename *RellocateAp* to *RelocateAp*
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function StartupAllAPsWorker()'s function
header due to it is duplicated with MpInitLibStartupAllAPs().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus()
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function StartupThisAPWorker()'s comment
header due to it is duplicated with MpInitLibStartupThisAP().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function MpInitLibEnableDisableAP()'s function
header due to it is duplicated with MpInitLibEnableDisableAP().
v3:
1. Use CamelCase for mCheckAllAPsEvent, mStopCheckAllApsStatus.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function SwitchBSPWorker()'s comment header
due to it is duplicated with MpInitLibSwitchBSP().
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
WakeUpAP() is used to wakeup APs per current ApLoopMode and make sure APs wake
up successfully.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
ApWakeupFunction() is the first C function executed from AP reset vector. When
APs waken up at the first time, it will sync BSP's MTRR setting and load
microcode on APs and collect APs' BIST information.
When AP tasked finished, it will place APs it one loop specified by ApLoopMode.
v5:
1. Rename ApCFunction to ApWakeupFunction to meet naming convention.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, searching unallocated memory under in
EFI_HOB_TYPE_RESOURCE_DESCRIPTOR hobs to find the memory under 1MB for AP reset
vector. After End of PEI event triggered, we need to restore original the buffer
contents to avoid crash the OS on S3 boot.
In DxeMpInitLib, allocate the memory under 1MB for AP reset vector.
Add helper functions AllocateResetVector()/FreeResetVector() used by WakeupAp().
v3:
1. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, register End of PEI callback function CpuMpEndOfPeiCallback().
v5:
1. Add comment block for mMpInitLibNotifyList.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, save CPU MP Data pointer into one local Guided HOB.
In DxeMpInitLib, save CPU MP Data pointer into one global variable.
Add helper functions GetCpuMpData()/SaveCpuMpData().
v5:
1. Move CPU_INIT_MP_LIB_HOB_GUID from MpLib.c to MpLib.h to make
all C files visible.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
v5:
1. Add comment block for structure CPU_VOLATILE_REGISTERS.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Initialize CPU_AP_DATA for CPU APs and add GetApState()/SetApState() helper
functions to get/set AP state.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v5:
1. Add comment block for enum AP_INIT_STATE and structure CPU_AP_DATA.
2. Add more comment for structure CPU_INFO_IN_HOB.
3. Add more clarification in structure _CPU_MP_DATA for those fields
pass from PEI to DXE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Firstly, get ApLoopMode from PcdCpuApLoopMode. If MonitorMwait feature is not
supported, update ApLoopMode to ApHltLoop. If MonitorMwait feature is supported,
get MointorFilter size by CPUID.[EAX=05H]:EBX.BIT0-15.
v5:
1. Add comment block for enum AP_LOOP_MODE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In MpInitLibInitialize(), invoke AsmGetAddress() to get get assembly functions'
entry addresses and the sizes from returned MP_ASSEMBLY_ADDRESS_MAP structure.
v5:
1. Add more detailed comments for structure MP_ASSEMBLY_ADDRESS_MAP.
v4:
1. Add AsmRelocateApLoop information return in AsmGetAddress().
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
AsmRelocateApLoop() is used to place APs into MWAIT-loop if MonitorMwait
feature is supported before hand-off to OS, or place APs into HLT-loop if
MonitorMwait feature is not supported.
If the current mode is long mode, we will switch APs to protected mode
before placing APs in MWAIT-loop or HLT-loop. Thus, once APs wakeup from
loop, APs needn't the page table that may be crashed by OS.
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
2. Fix typo Proteced to Protected.
3. Fix typo segement to segment
4. Use word MONITOR instead of mwait-monitor.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
EnableExecuteDisable in MP_CPU_EXCHANGE_INFO is used to tell AP reset vector if
enable execute disable feature on APs. This feature should be enabled before CR3
is written.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Michael Kinney
Jeff Fan
Dandan Bi
Laszlo Ersek