In order to allow booting with the MMU and caches enabled really early,
we need to ensure that the code that populates the page tables can
access those page tables with the statically defined ID map active.
So let's put the permanent PEI RAM in the first 128 MiB of memory, which
we will cover with this initial ID map (as it is the minimum supported
DRAM size for ArmVirtQemu).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To substantially reduce the amount of processing that takes place with
the MMU and caches off, implement a version of ArmPlatformLib specific
for QEMU/mach-virt in AArch64 mode that carries a statically allocated
and populated ID map that covers the NOR flash and device region, and
128 MiB of DRAM at the base of memory (0x4000_0000).
Note that 128 MiB has always been the minimum amount of DRAM we support
for this configuration, and the existing code already ASSERT()s in DEBUG
mode when booting with less.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the appropriate PCD definition in the ArmVirtQemu DSC so that the
boot timeout is taken from the Timeout variable automatically, which is
what Linux tools such as efibootmgr expect.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the memory protections were implemented and enabled on ArmVirtQemu
5+ years ago, we had to work around the fact that GRUB at the time
expected EFI_LOADER_DATA to be executable, as that is the memory type it
allocates when loading its modules.
This has been fixed in GRUB in August 2017, so by now, we should be able
to tighten this, and remove execute permissions from EFI_LOADER_DATA
allocations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The iSCSI driver slows down the boot on a pristine variable store flash
image, as it creates a couple of large EFI non-volatile variables to
preserve state between boots.
Since iSCSI boot for VMs is kind of niche anyway, let's default to
disabled. If someone needs it in their build, they can use the -D build
command option to re-enable it on the fly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The EBC interpreter is rarely, if ever, used on ARM, and is especially
pointless on virtual machines. So let's drop it from the builds.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Don't allow spelling errors to break the CI build and inadvertently
reject pull requests - spelling is important but not that important.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
As Cloud Hypervisor has its own PeiMemLib, change it in dsc file
accordingly.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Memory layout in CLoud Hypervisor for arm is changed and is different
with Qemu, thus we should build its own PeiMemInfoLib.
The main change in the memory layout is that normal ram may not contiguous
under 4G. The top 64M under 4G is reserved for 32bit device.
What this patch does:
1. get all of the memory node from DT;
2. Init page table for each memory node;
3. Add all of the memory nodes to Hob;
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
The new changes in SecureBootVariableLib brought in a new dependency
of PlatformPKProtectionLib.
This change added the new library instance from SecurityPkg to resolve
ArmVirtPkg builds.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Include DxeHardwareInfoLib class in the common ArmVirt.dsc.inc so that
ArmVirt* platforms use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Following the Hardware Info library, create the DxeHardwareInfoLib
which implements the whole API capable of parsing heterogeneous hardware
information. The list-like API grants callers a flexible and common
pattern to retrieve the data. Moreover, the initial source is a BLOB
which generalizes the host-to-guest transmission mechanism.
The Hardware Info library main objective is to provide a way to
describe non-discoverable hardware so that the host can share the
available resources with the guest in Ovmf platforms. This change
features and embraces the main idea behind the library by providing
an API that parses a BLOB into a linked list to retrieve hardware
data from any source. Additionally, list-like APIs are provided so
that the hardware info list can be traversed conveniently.
Similarly, the capability is provided to filter results by specific
hardware types. However, heterogeneous elements can be added to the
list, increasing the flexibility. This way, a single source, for
example a fw-cfg file, can be used to describe several instances of
multiple types of hardware.
This part of the Hardware Info library makes use of dynamic memory
and is intended for stages in which memory services are available.
A motivation example is the PciHostBridgeLib. This library, part
of the PCI driver populates the list of PCI root bridges during DXE
stage for future steps to discover the resources under them. The
hardware info library can be used to obtain the detailed description
of available host bridges, for instance in the form of a fw-cfg file,
and parse that information into a dynmaic list that allows, first to
verify consistency of the data, and second discover the resources
availabe for each root bridge.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Define the HardwareInfoLib API and create the PeiHardwareInfoLib
which implements it, specifically for Pei usage, supporting
only static accesses to parse data directly from a fw-cfg file.
All list-like APIs are implemented as unsupported and only a
fw-cfg wrapper to read hardware info elements is provided.
The Hardware Info library is intended to describe non-discoverable
hardware information and share that from the host to the guest in Ovmf
platforms. The QEMU fw-cfg extension for this library provides a first
variation to parse hardware info by reading it directly from a fw-cfg
file. This library offers a wrapper function to the plain
QmeuFwCfgReadBytes which, specifically, parses header-data pairs out
of the binary values in the file. For this purpose, the approach is
incremental, reading the file block by block and outputting the values
only for a specific known hardware type (e.g. PCI host bridges). One
element is returned in each call until the end of the file is reached.
Considering fw-cfg as the first means to transport hardware info from
the host to the guest, this wrapping library offers the possibility
to statically, and in steps, read a specific type of hardware info
elements out of the file. This method reads one hardware element of a
specific type at a time, without the need to pre-allocate memory and
read the whole file or dynamically allocate memory for each new
element found.
As a usage example, the static approach followed by this library
enables early UEFI stages to use and read hardware information
supplied by the host. For instance, in early times of the PEI stage,
hardware information can be parsed out from a fw-cfg file prescinding
from memory services, that may not yet be available, and avoiding
dynamic memory allocations.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds an instance of VariableFlashInfoLib to the platform build as
it is a new library class introduced in MdeModulePkg.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
ConSplitterDxe will pick the highest available resolution then,
thereby making better use of the available display space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use the correct PCD type for PcdPlatformBootTimeOut so it gets wired up
to the Timeout EFI variable automatically, which is how the boot manager
stores the timeout preference.
Note that this changes the default to 5 seconds, which appears to be
common across platforms.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Alex reports that the cache invalidation performed by
ArmVirtMemoryInitPeiLib takes a non-negligible amount of time at boot.
This cache invalidation used to be necessary to avoid inconsistencies
between the CPU's cached and uncached views of the permanent PEI memory
region, given that the PEI phase is where the MMU gets enabled.
The only allocations done from permanent PEI memory with the MMU off are
pages used for page tables, and since commit 748fea6279
("ArmPkg/ArmMmuLib AARCH64: invalidate page tables before populating
them"), each of those is invalidated in the caches explicitly, for
reasons described in the patch's commit log. All other allocations done
in PEI are either from temporary PEI memory, which includes the stack,
or from permanent PEI memory but after the MMU has been enabled.
This means that the cache invalidation in ArmVirtMemoryInitPeiLib is no
longer necessary, and can simply be dropped.
Reported-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acpiview is a command line tool allowing to display, dump, or check
installed ACPI tables. Add a 'ACPIVIEW_ENABLE' switch to enable it
on an ArmVirt platform.
The switch is set for the ArmVirtKvmTool platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
A Configuration Manager that uses the Dynamic Tables framework
to generate ACPI tables for Kvmtool Guests has been provided.
This Configuration Manager uses the FdtHwInfoParser module to
parse the Kvmtool Device Tree and generate the required
Configuration Manager objects for generating the ACPI tables.
Therefore, enable ACPI table generation for Kvmtool.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add Configuration Manager to enable ACPI tables for Kvmtool
firmware. The Configuration Manager for Kvmtool uses the DT
Hardware Information Parser module (FdtHwInfoParser) to parse
the DT provided by Kvmtool. The FdtHwInfoParser parses the DT
and invokes the callback function HW_INFO_ADD_OBJECT to add
the Configuration Manager objects to the Platform Information
repository.
The information for some Configuration Manager objects may not
be available in the DT. Such objects are initialised locally
by the Configuration Manager.
Support for the following ACPI tables is provided:
- DBG2
- DSDT (Empty stub)
- FADT
- GTDT
- MADT
- SPCR
- SSDT (Cpu Hierarchy)
- SSDT (Pcie bus)
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Most ACPI tables for Kvmtool firmware are dynamically
generated. The AML code is also generated at runtime
for most components in appropriate SSDTs.
Although there may not be much to describe in the DSDT,
the DSDT table is mandatory.
Therefore, add an empty stub for DSDT.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The cpsell tool checks for unknown words in the upstream CI.
Add some new words to the list of exceptions.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
[1] de72c4b7cd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmVirtPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3749
Update package YAML files to ignore ECC errors that are
already present. These issues must be fixed in the future,
but should not block source code changes for these known
issues.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Relocate VirtioFdtDxe to OvmfPkg/Fdt, this driver is leverage by
both ARM and RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs. Also use
PcdPciMmio32Translation and PcdPciMmio64Translation
PCDs provided by MdePkg instead of ArmPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate QemuFwCfgLib to OvmfPkg/Library/QemuFwCfgLib and rename
it to QemuFwCfgLibMmio, this library is leverage by both ARM and
RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate HighMemDxe to OvmfPkg/Fdt, this library is leverage by
both ARM and RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs.
Add OvmfPkg/Fdt maintainers in Maintainers.txt
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
PcdPciIoTranslation PCD is relocated to MdePkg and leveraged by
both ARM and RISC-V arch. This patch removes the one from ArmPkg
and address the corresponding changes required for other modules
under ArmVirtPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This is one of the series patches to restructure the location of modules under
ArmVirtPkg for RiscVVirtPkg. RiscVVirtPkg leverage FDT Client protocol to
parse FDT nodes.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Disable the TPM2 platform hierarchy by directly calling
ConfigureTpmPlatformHierarchy().
Per the TCG firmware specification "TCG PC Client Platform Firmware Profile
Specification" the TPM 2 platform hierarchy needs to be disabled or a
random password set and discarded before the firmware passes control to the
next stage bootloader or kernel.
Current specs are here:
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_PFP_r1p05_v23_pub.pdf
Section 11 states:
"Platform Firmware MUST protect access to the Platform Hierarchy
and prevent access to the platform hierarchy by non-manufacturer-
controlled components."
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3510
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
We just added the same functionality to the OvmfPkg. However, on x86, we
could use the notification mechanism around
gEfiDxeSmmReadyToLockProtocolGuid to indirectly invoke
ConfigureTpmPlatformHierarchy(). Since ARM does not have an SMM mode, we
have to use direct invocation of this function at the same place in
PlatformBootManagerBeforeConsole() as it is called on x86.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3510
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The edk2 patch
SecurityPkg: Create library for setting Secure Boot variables.
moves generic functions from SecureBootConfigDxe and places
them into SecureBootVariableLib. This patch adds SecureBootVariableLib
mapping for ArmVirtPkg platform.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cloud Hypervisor is KVM based VMM and is implemented in rust. Just like
other VMMs it need UEFI support to let ACPI work. That's why
Cloud Hypervisor is introduced here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
There is no device like Fw-cfg in Qemu in Cloud Hypervisor, so a specific
Acpi handler is introduced here.
The handler implemented here is in a very simple way:
1. acquire the RSDP from the PCD variable in the top ".dsc";
2. get the XSDT address from RSDP structure;
3. get the ACPI tables following the XSDT structure and install them
one by one;
4. get DSDT address from FADT and install DSDT table.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ArmVirtPkg\PlatformHasAcpiDtDxe implementation is not common
and is specific for Qemu. So add a Cloud Hypervisor specific
version that decides whether the firmware should expose an ACPI
based or a Device Tree based hardware description to an operating
system.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
PCIe support has been added to the Kvmtool virtual machine
manager. Therefore, enable PCIe support for Kvmtool firmware.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
PCIe support has been added to Kvmtool Virtual Machine Manager.
The PCI host bridge utility lib is used to retrieve information
about the Root Bridges in a platform.
Therefore, add an instance of PciHostBridgeUtilityLib as this is
required to enable PCIe support for Kvmtool firmware.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
In order to take advantages of extra pci root buses in ArmVirtPkg, it is
necessary to scan extra root buses when getting root briges. And now
PciHostBridgeUtilityLib already provides a set of utility functions that
support for extra pci root buses, like PciHostBridgeUtilityGetRootBridges()
/ PciHostBridgeUtilityFreeRootBridges(). So let's rebase
ArmVirtPkg/FdtPciHostBridgeLib to PciHostBridgeUtilityGetRootBridges() /
PciHostBridgeUtilityFreeRootBridges() to extend ArmVirtPkg with extra
pci root buses support.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20210119011302.10908-11-cenjiahui@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In NOOPT and DEBUG builds, if "PcdMaximumLinkedListLength" is nonzero,
then several LIST_ENTRY *node* APIs in BaseLib compare the *full* list
length against the PCD.
This turns the time complexity of node-level APIs from constant to linear,
and that of full-list manipulations from linear to quadratic.
(See some example OVMF numbers in the previous patch.)
Checking list lengths against an arbitrary maximum -- default value, and
current ArmVirtPkg setting: 1,000,000 -- seems useless even in NOOPT and
DEBUG builds, while the cost is significant; so set the PCD to 0.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3152
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-11-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some UEFI shell commands read and write files in chunks. The chunk size is
given by "PcdShellFileOperationSize", whose default in
"ShellPkg/ShellPkg.dec" is 4KB (0x1000).
The virtio-fs daemon of QEMU advertizes a 128KB maximum buffer size by
default, for the FUSE_WRITE operation.
By raising PcdShellFileOperationSize 32-fold, the number of FUSE write
requests shrinks proportionately, when writing large files. And when a
Virtio Filesystem is not used, a 128KB chunk size is still not
particularly wasteful.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3125
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-4-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Include the VirtioFsDxe driver in the ArmVirtPkg platforms that include
Virtio10Dxe. (The virtio-fs device is virtio-1.0-only.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
"vm_image: 'ubuntu-latest'" now refers to Ubuntu Focal (20.04LTS), not
Ubuntu Bionic (18.04LTS), according to
<https://github.com/actions/virtual-environments/issues/1816>.
In Focal, the "qemu" package is a dummy package with no dependencies, and
so the actual emulators are not pulled in. Compare:
https://packages.ubuntu.com/bionic/qemuhttps://packages.ubuntu.com/focal/qemu
This causes CI runs to fail.
It would be best to switch to the "qemu-system" package name, which
continues to depend on the emulators:
https://packages.ubuntu.com/bionic/qemu-systemhttps://packages.ubuntu.com/focal/qemu-system
However, while that package does make the emulators available, the
emulators crash. So for now, stick with the previous Ubuntu environment,
which continues to be supported, per
<https://github.com/actions/virtual-environments/issues/1816>.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201217204049.26817-2-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3003
There is a plan to make MD5 disable as default.
The new MACRO ENABLE_MD5_DEPRECATED_INTERFACES
would be introduced to enable MD5. Make the
definition ahead of the change to avoid build
error after the MACRO changed.
Enable iSCSI.
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20201112055558.2348-7-zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3003
There is a plan to make MD5 disable as default.
The new MACRO ENABLE_MD5_DEPRECATED_INTERFACES
would be introduced to enable MD5. Make the
definition ahead of the change to avoid build
error after the MACRO changed.
Enable iSCSI.
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20201112055558.2348-6-zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that can be used
to launch guest VMs. Support for Kvmtool virtual
platform has been added to ArmVirtPkg.
Add kvmtool to the ArmVirtPkg dictionary to prevent
the CI Spell check plugin from failing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool emulates a MC146818 RTC controller in the
MMIO space. To support this the MC146818 RTC driver
PcatRealTimeClockRuntimeDxe has been updated to
support MMIO accesses. PCDs for RTC Index and
Target register base addresses in the MMIO space
have been introduced. The KvmtoolRtcFdtClientLib
reads the MC146818 RTC MMIO base address region
from the Kvmtool device tree and updates the
Index and Target register PCDs.
As these PCDs are defined in PcAtChipsetPkg.dec,
this patch updates the CI script to add this
dependency.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that enables hosting
KVM guests. Kvmtool emulates certain devices like serial
port, RTC, etc. essentially providing a virtual platform.
This patch adds support for kvmtool virtual platform.
Following is a brief description of the firmware
implementation choices:
- Serial Port: 16550 UART
On some platforms the 16550 UART is interfaced using
PCI. Therefore, the 16550 Serial port library is
dependent on the PCI library. The 16550 UART driver
checks the Device ID represented using the PCD
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
to determine if the UART is behind PCI.
If the Device ID is 0xFF then the serial 16550 UART
is not behind PCI.
On Kvmtool the Serial 16550 UART is not behind PCI,
and therefore a combination of BasePciLibPciExpress
and BasePciExpressLib is used to satisfy the PCI
library dependency.
The PcdSerialPciDeviceInfo is also set to 0xFF to
indicate that the Serial 16550 UART is not behind
PCI. The PCD PcdSerialUseMmio is also set to TRUE
to indicate MMIO accesses are required for the
UART registers.
Additionally two instances of PlatformHookLibs are
provided EarlyFdt16550SerialPortHookLib and
Fdt16550SerialPortHookLib to patch the
PcdSerialRegisterBase so that BaseSerialPortLib16550
and retrieve the base address of the 16550 UART.
- Dependency order for Flash
FaultTolerantWriteDxe makes use of PCDs (e.g.
PcdFlashNvStorageFtwSpareBase64 etc.), which in
case of kvmtool will be evaluated based on the CFI
flash base address read from the DT. These variables
are populated in the NorFlashPlatformLib loaded by
ArmVeNorFlashDxe.
This results in a dependency issue with
FaultTolerantWriteDxe. To resolve this make the
NorFlashPlatformLib as a library dependency for
FaultTolerantWriteDxe.
- RTC Controller
A separate patch updates the MC146818 RTC controller
driver to support MMIO accesses.
A KvmtoolRtcFdtClientLib has been introduced to
extract the base addresses of the RTC controller
from the platform device tree and map the RTC
register space as Runtime Memory.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a new GUID Hob gEarly16550UartBaseAddressGuid
to cache the base address of the 16550 UART, for when
PCD access is not available.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. It essentially provides a
virtual hardware platform for guest operating
systems.
Kvmtool hands of a device tree containing the
current hardware configuration to the firmware.
A standards-based operating system would use
ACPI to consume the platform hardware
information, while some operating systems may
prefer to use Device Tree.
The KvmtoolPlatformDxe performs the platform
actions like determining if the firmware should
expose ACPI or the Device Tree based hardware
description to the operating system.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Updates the DSC for the ArmVirtPkg platform to add a RngLib that uses the
TimerLib. This is due to a later change that adds TimerLib as a dependency
for OpenSSL. The TimerLib based RngLib mimics the behavior of OpenSSL
previously and it is recommended to switch to a better source of
entropy than the system's performance counter.
Ref: https://github.com/tianocore/edk2/pull/845
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Matthew Carlson <matthewfcarlson@gmail.com>
Our UEFI guest firmware takes ownership of the emulated NOR flash in
order to support the variable runtime services, and it does not expect
the OS to interfere with the underlying storage directly. So disable
the NOR flash DT nodes as we discover them, in a way similar to how we
disable the PL031 RTC in the device tree when we attach our RTC runtime
driver to it.
Note that this also hides the NOR flash bank that carries the UEFI
executable code, but this is not intended to be updatable from inside
the guest anyway, and if it was, we should use capsule update to do so.
Also, the first -pflash argument that defines the backing for this flash
bank is often issued with the 'readonly' modifier, in order to prevent
any changes whatsoever to be made to the executable firmware image by
the guest.
This issue has become relevant due to the following Linux changes,
which enable the flash driver stack for default build configurations
targetting arm64 and 32-bit ARM.
ce693fc2a877
("arm64: defconfig: Enable flash device drivers for QorIQ boards", 2020-03-16).
5f068190cc10
("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH", 2019-04-03)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
We no longer use ELF PIE executables to implement the self-relocating
PrePi so drop the custom linker script and visibility override header
file.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
Instead of having a GCC specific routine to perform self-relocation
based on ELF metadata, use the PE/COFF metadata and the existing
PeCoff library routines. This reduces the amount of bespoke assembler
code that is a burden to maintain, and is not portable across the set
of toolchains we support.
This does require some special care, as we have no control over how
the C code references global symbols, so we need to emit these
references from the calling assembler code. Otherwise, they may be
emitted as absolute references, in which case they need to be fixed
up themselves, leading to a circular dependency.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
In preparation for making the self-relocating PrePi use the ordinary
BasePeCoffLib routines for relocating the image in place in memory
at start, add a special FDF rule that builds SEC modules as PE32
images with the relocation metadata preserved.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
Port the DSC file changes from the similarly titled OvmfPkg patch in this
series to ArmVirtPkg.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't distribute UEFI_DRIVER modules stand-alone that were built as
part of an ArmVirtQemu* platform. ArmVirtQemu* UEFI_DRIVERs are allowed to
inherit platform dependencies.
By enabling UEFI_DRIVERs to consume QemuFwCfgLib, we can hook fw_cfg-based
NULL class libraries into UEFI drivers, e.g. in order to set dynamic PCDs.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit e069278905.
The default value for PcdAcpiExposedTableVersions is now set to 0x20
for Aarch64 systems. Setting this PCD in ArmVirtPkg/ArmVirtQemu.dsc
is no longer necessary.
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable support for NVMe storage in ArmVirtQemu/QemVirtQemuKernel in order
to simplify booting/installing operating systems that don't support
virtio.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtGicArchLib was originally implemented before virtualization
emulation was implemented in QEMU, and the GICv2 model implemented only
the physical copy of control registers.
Enabling virtualization emulation to QEMU adds also the virtual copy,
doubling the RegSize returned by FindCompatibleNodeReg () in
ArmVirtGicArchLibConstructor (). This triggered an ASSERT when running
QEMU with -M virt,virtualization=on. Address this by testing for both
possible valid values of RegSize.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2588
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the QEMU loader file system implementation inside this library,
and switch to the separate QemuLoadImageLib library and the associated
driver to expose the kernel and initrd passed via the QEMU command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the QEMU loader DXE driver and client library to the build for
our QEMU targeted implementations in ArmVirtPkg.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
The CRLF conversion is motivated by "PatchCheck.py".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add the 'initrd' dynamic shell command to the build so we can load
Linux initrds straight from the shell using the new generic protocol,
which does not rely on initrd= being passed on the command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that all the TPM2 related plumbing is in place, we can add the
final piece that performs the measurements of loaded images into
the appropriate PCRs.
This patch ports commit d5a002aba0 ("OvmfPkg: plug
DxeTpm2MeasureBootLib into SecurityStubDxe", 2018-03-09) to ArmVirtQemu.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the DXE phase component that publishes the HII pages and
associated logic to enable TPM2 parameters to be configured by
the user via the setup menu.
This patch ports (parts of) the following commits to ArmVirtQemu:
- 3103389043 ("OvmfPkg: Add TCG2 Configuration menu to the Device
Manager menu", 2019-02-11)
- cf3ad972a2 ("OvmfPkg: reorganize TPM2 support in DSC/FDF files",
2020-01-09)
- f55477fe2d ("OvmfPkg: use HII type PCDs for TPM2 config related
variables", 2020-01-09)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the TPM2 support module in the DXE phase, and the associated
libraries and PCDs that it requires. This will be wired into the
measured boot support code in a subsequent patch.
Note that Tcg2Dxe.inf is added to ArmVirtQemuFvMain.fdf.inc, which
is shared with other platforms in ArmVirtPkg, but as those will not
set the TPM2_ENABLE define, this change does not affect them.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module", 2018-03-09)
- b9777bb42e ("OvmfPkg: add Tcg2PhysicalPresenceLibQemu", 2018-05-22)
-- only to match OVMF's current lib class resolutions
- 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib if and only if
TPM2_ENABLE", 2019-07-04)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of conditializing the choice of resolution based on
TPM2_ENABLE for ArmVirtQemu, move the TpmMeasurementLib out of the
shared .DSC include and into the individual DSCs.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DxeTpmMeasurementLib should only be used on platforms that implement
measured boot, which we will do in a future patch, but only for
ArmVirtQemu, as the remaining ones are fundamentally incompatible,
given that they do not implement a PEI phase.
So use TpmMeasurementLibNull as the default resolution for all
ArmVirtPkg platforms, regardless of how they are built.
This mirrors commit 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib
if and only if TPM2_ENABLE", 2019-07-04).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Incorporate the PEI components and the associated library class
resolutions and PCD declarations to enable TPM2 support in the
PEI phase.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei clone",
2018-03-09)
- 4672a48928 ("OvmfPkg: include Tcg2Pei module", 2018-03-09)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so
that the TPM init code adopts the currently active PCR banks as
the ones that are enabled by default.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a first step in gradually adding TPM2 support to ArmVirtQemu, add
the TPM2_ENABLE configurable to the [Defines] section, and if it is
set, add the ResetSystem PEIM to the build, along with the library
class references that we will need to support it:
- wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself,
which will be in charge of performing the actual reset
- add PeiResetSystemLib as the common ResetSystemLib resolution for
PEIM class modules, so that other PEIMs will invoke the PPI
published by the ResetSystem PEIM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ard Biesheuvel
Jianyong Wu
Pierre Gondois
Edward Pickup
Kun Qin
Nicolas Ojeda Leon
Michael Kubacki
Rebecca Cran
Gerd Hoffmann
Sami Mujawar
Abner Chang
Sebastien Boeuf
Michael D Kinney
Stefan Berger
Grzegorz Bernacki
Philippe Mathieu-Daude
Dov Murik
Dandan Bi
Jiahui Cen via groups.io
Laszlo Ersek
Gao, Zhichao
Bret Barkelew
Vladimir Olovyannikov
Matthew Carlson
Shenglei Zhang
Ard Biesheuvel
Sean Brogan
Samer El-Haj-Mahmoud
Leendert van Doorn
Ard Biesheuvel
Leif Lindholm