According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: David Wei <david.wei@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The BootScriptMemPoll() helper function does the following:
- pop LoopTimes from the variable argument list as UINT64, then truncate
it to UINTN,
- pass the truncated value to S3BootScriptSaveMemPoll() as last argument.
The truncation to UINTN is now superfluous, thanks to the patch titled
"MdePkg, MdeModulePkg: S3BootScriptSaveMemPoll(): accept 64-bit
LoopTimes".
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=260
Update workaround to be more generic.
* Search for the largest region between 1MB and 4GB
* Find all adjacent regions to compute total size
* Minimum aligned size if 4KB
* Mark extended region to align size as EFI_ALLOCATED
* If an adjacent EFI_ALLOCATED region is present, then
increase the size of the adjacent region.
* If adjacent EFI_ALLOCATED region is not present, then
allocate a new HOB with one extra entry to describe
the extended region to align the total size. Preserve
the last entry in the descriptor list for compatibility.
This is a workaround until the binary module that produces the
gEfiSmmPeiSmramMemoryReserveGuid HOB is updated
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
LzmaCustomDecompressLib and PeiDxeDebugLibReportStatusCode were copied
from IntelFrameworkModulePkg to MdeModulePkg, but the originals were
kept for compatibility.
Since the libraries are identical, move Vlv2TbltDevicePkg to use the
MdeModulePkg versions instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: David Wei <david.wei@intel.com>
Update PlatformPkgGccX64.dsc to align with PlatformPkgX64.dsc
on library mappings and PCD settings.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=276
Add the UART console produced by the DebugAgent when
SOURCE_DEBUG_ENABLE is TRUE. Without this change, the
debugger connects but the Boot Manager and the UEFI
Shell do not have an active console because the Boot
Manager does not know about the DebugAgent UART
Console device path and the Debug Agent is using the
UART device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=276
Fix library mapping and PCD settings required to use
the SOURCE_DEBUG_ENABLE feature in PEI, DXE, and SMM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=274
Add support for multi-processor builds using a /m flag.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=273
Update build script to generate a report file and put
both the report file and the log file in the directory
Vlv2TbltDevicePkg with an EDK2_Vlv2TbltDevicePkg prefix.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=272
Fix typo in script file. To prevent output from being
shown, then output file should be 'nul', not 'null'.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update [BuildOptions] to use of 4K aligned PE/COFF
image sections to support page level protection of
DXE_RUNTIME_DRIVER, SMM_CORE, and DXE_SMM_DRIVER
modules.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=264
The IA32 build gets timeouts booting to the UEFI Shell.
Update the IA32 DSC file to match the X64 DSC file
disabling the fTPM feature.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=263
Fix IA32 build issues in the PlatformFlashAccessLib. Some of the
UINT64 FLASH addresses values need to be typecast to UINTN.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=261https://bugzilla.tianocore.org/show_bug.cgi?id=262
Remove the PowerManagement2 binary SMM module that generates an
ASSERT() and the DigitalThermalSensor binary SMM module that
causes an AP to be stuck in the busy state.
This is a workaround until these two SMM binary modules can be
updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=260
The PiSmmCPuDxeSmm module requires the SMRR base address and length
to be aligned. The memory initialization for Vlv2TbltDevicePkg
produces an SMRAM base address that is on a 16MB boundary and an
SMRAM length of 12MB. The SMRAM length is rounded up to 16MB.
This is a workaround until the binary module that produces the
gEfiSmmPeiSmramMemoryReserveGuid HOB is updated
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=259
Set CAPSULE_ENABLE to TRUE so the standard Vlv2TbltDevicePkg
platform builds can complete. Build_IFWI.bat assumes this
flag is TRUE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=258
Update bld_vlv.bat to run BaseTools build command with a call
statement to support running the build command from python
sources.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If OPENSSL_PATH is set, the build process generates capsule.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Add DSC/FDF to generate capsule image.
It is separated from normal DSC/FDF, because the FDF file need use
the result of final build.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Add capsule and recovery support module in platform dsc and fdf.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
1) Add capsule and recovery boot path handling in platform BDS.
2) Add check if the platform is using default test key for capsule.
Produce PcdTestKeyUsed to indicate if there is any
test key used in current BIOS, such as recovery key,
or capsule update key.
Then the generic UI may consume this PCD to show warning information.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Previous FlashDeviceLib only supports DxeRuntime and Smm.
It cannot be linked with SystemBiosUpdateDxe driver.
So we separate DxeRuntime related code into a standalone file,
and create FlashDeviceLibDxe.inf.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Add SystemFirmwareDescriptor for capsule update.
The PEIM extracts SystemFirmwareDescriptor info from FFS and reports
it via PCD.
Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
According to PI spec,DxeSmmReadyToLock protocol is published immediately after signaling of the End of Dxe Event.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lushifex <shifeix.a.lu@intel.com>
The default PcdPeiIchEhciControllerMemoryBaseAddress value 0xFD000000
conflict with the default TXE SECUMA MMIO address.
So we update to 0xFC000000 to avoid conflict.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
In order to support recovery in PEI phase, a platform need initialize
USB controller. This logic is missing in current PchInitPeim.
We removed MultiPlatformInfoInit() because it is already done in
PlatformEarlyInitEntry().
We also initialize XhciMemBaseAddr to 0, or it is garbage value.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
PiDxeS3BootScriptLib will be updated to consume PciSegmentLib
instead of PciLib to support multiple PCI segment.
That means platforms need to add PciSegmentLib
declaration in platform dsc if the PciSegmentLib was
not declared in platform dsc before.
For platforms only have one segment,
MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf is recommended
to be used and declared in platform dsc for PiDxeS3BootScriptLib to have
equivalent functionality with before.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Thanks,
David Wei
-----Original Message-----
From: Gary Lin [mailto:glin@suse.com]
Sent: Thursday, August 11, 2016 4:38 PM
To: edk2-devel@lists.01.org
Cc: Wei, David <david.wei@intel.com>
Subject: [PATCH 4/4] Vlv2TbltDevicePkg: Add RAW file type to Rule.Common.SEC.BINARY
For GCC, it's using the reset vector in
IntelFspWrapperPkg/FspWrapperSecCore/Vtf0/Bin/ResetVec.ia32.raw.
Add the RAW file type to Rule.Common.SEC.BINARY in PlatformPkgGcc.fdf,
so that GenFds can handle the raw file.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Thanks,
David Wei
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Gary Lin
Sent: Thursday, August 11, 2016 4:38 PM
To: edk2-devel@lists.01.org
Cc: Wei, David <david.wei@intel.com>
Subject: [edk2] [PATCH 3/4] Vlv2TbltDevicePkg/PlatformFspLib: Fix the include path
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Thanks,
David Wei
-----Original Message-----
From: Gary Lin [mailto:glin@suse.com]
Sent: Thursday, August 11, 2016 4:38 PM
To: edk2-devel@lists.01.org
Cc: Wei, David <david.wei@intel.com>
Subject: [PATCH 1/4] Vlv2TbltDevicePkg/FspSupport: Fix GCC build errors
Fix the errors from GCC:
Vlv2TbltDevicePkg/FspSupport/Library/PeiFspHobProcessLibVlv2/FspHobProcessLibVlv2.c: In function 'GetMemorySizeInMemoryTypeInformation':
Vlv2TbltDevicePkg/FspSupport/Library/PeiFspHobProcessLibVlv2/FspHobProcessLibVlv2.c:59:40: error: passing argument 1 of '(*PeiServices)->GetHobList' from incompatible pointer type [-Werror=incompatible-pointer-types]
Vlv2TbltDevicePkg/FspSupport/Library/PeiFspHobProcessLibVlv2/FspHobProcessLibVlv2.c:52:31: error: variable 'Status' set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/FspSupport/Library/PeiFspHobProcessLibVlv2/FspHobProcessLibVlv2.c: In function 'FspHobProcessForOtherData':
Vlv2TbltDevicePkg/FspSupport/Library/PeiFspHobProcessLibVlv2/FspHobProcessLibVlv2.c:401:29: error: passing argument 1 of 'PlatformHobCreateFromFsp' from incompatible pointer type [-Werror=incompatible-pointer-types]
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/PlatformInit.c:18:30: fatal error: Library\DebugLib.h: No such file or directory
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/PlatformInit.c:19:35: fatal error: Library\SerialPortLib.h: No such file or directory
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/UartInit.c:18:27: fatal error: Library\IoLib.h: No such file or directory
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/UartInit.c:19:35: fatal error: Library\SerialPortLib.h: No such file or directory
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/UartInit.c: In function 'EnableInternalUart':
Vlv2TbltDevicePkg/FspSupport/Library/SecFspPlatformSecLibVlv2/UartInit.c:195:20: error: pointer targets in passing argument 1 of 'SerialPortWrite' differ in signedness [-Werror=pointer-sign]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Fix the following errors from gcc:
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c: In function ‘FvbWriteBlock’:
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c:368:44: error: variable ‘FwhInstance’ set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c: In function ‘FvbEraseBlock’:
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c:448:44: error: variable ‘FwhInstance’ set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c: In function ‘FvbInitialize’:
Vlv2TbltDevicePkg/FvbRuntimeDxe/FvbService.c:1028:41: error: variable ‘FvHeaderValid’ set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Fix the following error from gcc:
Vlv2TbltDevicePkg/PpmPolicy/PpmPolicy.c: In function ?PpmPolicyEntry?:
Vlv2TbltDevicePkg/PpmPolicy/PpmPolicy.c:50:29: error: variable ?MaxRatio? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
gcc issued the error of "multiple deifintion" since gBS was also defined
in MdePkg/Library/UefiBootServicesTableLib. Actually those global variables,
gBS, pBS, and pRS, in PpmPolicy.h were only used in one function. Besides,
gBS and pRS were not really used. Remove gBS and pRS and declare pBS in
PpmPolicyEntry() to satisfy gcc.
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Fix the following errors from gcc:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c: In function ?JudgeHandleIsPCIDevice?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c:164:22: error: variable ?DevicePath? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c: In function ?AddSmbiosT0x90Callback?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscOemType0x90Function.c:292:28: error: variable ?ForType90InputData? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorInformationFunction.c: In function ?MiscProcessorInformationFunction?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorInformationFunction.c:191:37: error: variable ?SrcDataSize? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorCacheFunction.c: In function ?MiscProcessorCacheFunction?:
Vlv2TbltDevicePkg/SmBiosMiscDxe/MiscProcessorCacheFunction.c:78:34: error: variable ?SrcDataSize? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Fix the following error from gcc:
Vlv2TbltDevicePkg/Wpce791/LpcDriver.c: In function ?LpcDriverStart?:
Vlv2TbltDevicePkg/Wpce791/LpcDriver.c:239:27: error: variable ?LpcDev? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Fix the following errors from gcc:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c: In function ?InitPciDevPME?:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c:516:26: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/Platform.c: In function ?InitThermalZone?:
Vlv2TbltDevicePkg/PlatformDxe/Platform.c:575:26: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/IchRegTable.c: In function ?InitializeSubsystemIds?:
Vlv2TbltDevicePkg/PlatformDxe/IchRegTable.c:111:10: error: variable ?SubsystemAudioVidDid? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c: In function ?InitBadBars?:
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:115:40: error: variable ?PciIoDevice? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:114:39: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c: In function ?ProgramPciLatency?:
Vlv2TbltDevicePkg/PlatformDxe/PciDevice.c:320:39: error: variable ?Status? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Fix the following errors from gcc:
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c: In function ?GetIntegratedIntelVbtPtr?:
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c:145:33: error: variable ?VbtSize? set but not used [-Werror=unused-but-set-variable]
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c: In function ?JudgeHandleIsPCIDevice?:
Vlv2TbltDevicePkg/VlvPlatformInitDxe/IgdOpRegion.c:418:22: error: variable ?DevicePath? set but not used [-Werror=unused-but-set-variable]
Cc: David Wei <david.wei@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: David Wei <david.wei@intel.com>
Laszlo Ersek
Ruiyu Ni
Michael Kinney
Leif Lindholm
Jiewen Yao
Gary Lin
lushifex
Star Zeng
Wei, David