Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
* Update GetMaintainer.py to support an optional GitHub ID at the
end of maintainer and reviewer lines.
* Remove contents after email address from standard output
* Fix minor issue in --lookup to convert file path separators
from '\' to '/' to be compatible with regular expression
file matching.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
1. Reduce the debug message during boot.
2. Update SmmCore debug level of MemoryAttributesTable align to DxeCore.
Signed-off-by: Yang Gang <yanggang@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3459
This patch adds support for R_RISCV_PCREL_LO12_S relocation type.
The logic is same as existing R_RISCV_PCREL_LO12_I relocation
except the difference between load vs store instruction formats.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Abner Chang <abner.chang@hpe.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
When reaching the assert, it can't be debugged because the PCD is
unknown. Therefore the PCD's GUID and token number should be printed.
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
cmd_load_symbols.py can only load symbols from FV. Add the possibility to
use UEFI console output to calculate dll load address and send
add-symbol-file commands directly to ArmDS debugger
dll load address can't be used directly from UEFI output, see comment in
DebugPeCoffExtraActionLib: "This may not work correctly if you generate
PE/COFF directly as then the Offset would not be required".
1) Use objdump -S module.dll | grep <_ModuleEntryPoint> to get offset
in dll (offset)
2) Use Entrypoint=<address> from UEFI console output (entrypoint)
3) dll load address is (entrypoint)-(offset)
Signed-off-by: Artem Kopotev <artem.kopotev@arm.com>
Tested-by: Pierre Gondois <Pierre.Gondois@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3482
This patch adds a search function in the Config Editor GUI at
the top right corner. Once users key in the words to search,
it will look for the option containing the string in the
same page and display it. It also includes a README for this
function.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Loo Tung Lun <tung.lun.loo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
PCD_DYNAMIC_AS_DYNAMICEX is recently added to Edk2, and it can treat
Dynamic PCD to Dynamic Ex PCD, which is Uefi Payload needs.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3485
CacheLib EfiProgramMtrr Function takes MTRR number as a input parameter,
in the function the parameter is defined as UINTN were as the caller
calling MTTR number in UINT32.
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Digant H Solanki <digant.h.solanki@intel.com>
Cc: Sangeetha V <sangeetha.v@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3483
This patch initializes the linked list RegisteredRamDisks in
RamDiskDxeEntryPoint before the registration of gEfiRamDiskProtocolGuid
with InstallMultipleProtocolInterfaces, allowing ramdisks to be created
via a callback installed with RegisterProtocolNotify as soon as the
protocol is registered.
Without this, calling RamDisk->Register() in the callback causes a crash:
ASSERT [RamDiskDxe] MdePkg/Library/BaseLib/LinkedList.c(75): List->ForwardLink != ((void *) 0)
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
V1: Assign the length and revision of UniversalPayload ExtraData
V2: Force int to UINT16
V3: Create a local variable to hold the size of ExtraData
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Change the PldHeader to Header in UNIVERSAL_PAYLOAD_EXTRA_DATA
The meaning of Pld is too general
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V1:
Universal Payload will consume Hobs from boot loader.
Dump all hobs in the Universal Payload entry.
V2:
Add function comments
V3:
minor change, for example Hobsize -> HobLength, SMBiosTable -> SmBiosTable
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When running Ecc on other repositories (e.g.: edk2-platforms with
edk2 as a submodule), edk2 modules are referenced.
E.g.: MdePkg/..
The PACKAGES_PATH env var can be used to reference other directories
containing packages. Set it so that Ecc can find these packages.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
'workspace_path' being an absolute path leads to 'ecc_csv' being
an absolute path. Then it won't be found among 'file' as they
are relative paths.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The edk2 path and the workspace path are identical when running
Ecc on edk2. When running Ecc on another repository
(e.g.: edk2-platforms with edk2 as a submodule of edk2-platforms),
these directories are different. Indeed, in the latter configuration,
Ecc must run git commands on the tested repository, i.e. the workspace
directory, edk2-platforms.
Thus, rename edk2_path as workspace_path.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The BaseTools directory is currently being located as a
sub-directory of the WORKSPACE env var. This might not be
true in other environments. Cf EDKII Build Specification,
s4.1.3 "Build Process Restrictions":
There is no restriction on the location of the EDK_TOOLS_PATH,
it may be located within a directory identified as the
WORKSPACE directory, or in any other location that is
accessible on the development workstation.
Locate the BaseTools directory using EDK_TOOLS_PATH instead.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1688
In order to support binary build, build tool add a
flag to convert type of Dynamic Pcd to DynamicEx Pcd
User can append -D PCD_DYNAMIC_AS_DYNAMICEX to build command
to enable this function.
Also, user can add "PCD_DYNAMIC_AS_DYNAMICEX = TRUE/FALSE" to the
defines section of Dsc file to enable this function.
PCD_DYNAMIC_AS_DYNAMICEX is a new reserved key word for this function.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the ConvertFceToStructurePcd.py tool generate
StructurePcd dsc file with comments from UNI file including
non-ascii character. Following DSC spec, there should not have
non-ascii character in DSC file. This patch removes the non-ascii
character when adding the comment and changes the circle R to (R).
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add STATIC_ASSERT() macros to verify that the compiler is
configured correctly for the use of L'' and L"" strings.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Remove 10 second delay workarounds for issues observed
when Mergify was originally enabled. These issues are
no longer present when GitHub branch protections are
used for status checks.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
* Enable Mergify queue feature to support auto rebase when
'push' label is set and gauarntee that all EDK II CI checks
are run before merging in changes with linear history.
* Use status checks configured in GitHub branch protections
* Allow non EDK II Maintainers to create a PR
Requires an EDK II Maintainer to accept the change and
request merge by adding 'push' label. Only EDK II Maintainers
have ability to set/clear labels.
* Do not automatically close PRs for personal builds.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Mergify adds merge commits to a PR when processing PRs using
the queue feature with auto rebase. Update PatchCheck.py
to ignore commit message issues with these merge commits.
These merge commits are not added to the base branch when
the PR is merged by Mergify.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
I'm relinquishing all my roles listed in "Maintainers.txt", for personal
reasons.
My email address <lersek@redhat.com> remains functional.
To my understanding, my employer is working to assign others engineers to
the edk2 project (at their discretion).
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3454
On Linux the shell expands the wildcard paths and causes multiple files
to be missed. This change adds additional quotes to defer expansion in
order to bring parity in cspell result.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3476
parseInfFile currently reading the EFI_BASE_ADDRESS from INF, once the
address found still it's continues to read the complete inf file which
is not required. once the EFI_BASE_ADDRESS read from the INF no need to
read the INF further.
MSFT compiler can generate the map file address 8 or 16 based on which
architecture the INF is compiler. currently it's support for IA32,
modified the patchfv to support for all.
modification of few typo errors in parseModMapFile, getCurr function
required
verification : Working Fine
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Cloud Hypervisor is KVM based VMM and is implemented in rust. Just like
other VMMs it need UEFI support to let ACPI work. That's why
Cloud Hypervisor is introduced here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
There is no device like Fw-cfg in Qemu in Cloud Hypervisor, so a specific
Acpi handler is introduced here.
The handler implemented here is in a very simple way:
1. acquire the RSDP from the PCD variable in the top ".dsc";
2. get the XSDT address from RSDP structure;
3. get the ACPI tables following the XSDT structure and install them
one by one;
4. get DSDT address from FADT and install DSDT table.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ArmVirtPkg\PlatformHasAcpiDtDxe implementation is not common
and is specific for Qemu. So add a Cloud Hypervisor specific
version that decides whether the firmware should expose an ACPI
based or a Device Tree based hardware description to an operating
system.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add OnigurumaUefiPort.h and OnigurumaUefiPort.c into ECC exception in
MdeModulePkg.ci.yaml in order to fix CI error.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Memory buffer that is allocated by malloc() and realloc() will be
shifted by 8 bytes because Oniguruma keeps its memory signature. This 8
bytes shift is not handled while calling free() to release memory. Add
free() function to check Oniguruma signature before release memory
because memory buffer is not touched when using calloc().
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When enter SMM exception, there will be a stack switch only if the IST
field of the interrupt gate is set. When CET shadow stack feature is
enabled, if there is a stack switch between SMM exception and SMM, the
shadow stack token busy bit needs to be cleared when return from SMM
exception to SMM. In UEFI BIOS, only page fault exception does the stack
swith when SMM shack guard feature is enabled. The condition of clear
shadow stack token busy bit should be SMM stack guard enabled, CET shadows
stack feature enabled and page fault exception.
The shadow stack token should be initialized by UINT64.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3462
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Qihua Zhuang <qihua.zhuang@intel.com>
Cc: Daquan Dong <daquan.dong@intel.com>
Cc: Justin Tong <justin.tong@intel.com>
Cc: Tom Xu <tom.xu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Per UEFI Spec 2.8 (UEFI_Spec_2_8_final.pdf, page 114)
5.2.3 Protective MBR
Table 20. Protective MBR Partition Record protecting the entire disk
The description for BootIndicator states the following:
> Set to 0x00 to indicate a non-bootable partition. If set to any
> value other than 0x00 the behavior of this flag on non-UEFI
> systems is undefined. Must be ignored by UEFI implementations.
Unfortunately, we have been incorrectly assuming that the
BootIndicator value must be 0x00, which leads to problems
when the 'pmbr_boot' flag is set on a disk containing a GPT
(such as with GNU parted). When the flag is set, the value
changes to 0x01, causing this check to fail and the system
is rendered unbootable despite it being valid from the
perspective of the UEFI spec.
To resolve this, we drop the check for the BootIndicator
so that we stop caring about the value set there, which
restores the capability to boot such disks.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3474
Cc: Chris Murphy <chrismurphy@fedoraproject.org>
Cc: David Duncan <davdunc@amazon.com>
Cc: Lazlo Ersek <lersek@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Neal Gompa <ngompa@fedoraproject.org>
Message-Id: <20210705093603.575707-1-ngompa@fedoraproject.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
It's neccessary to allocate a Graphics Stolen Memory area to enable
GPU-Passthrough for integrated Intel GPUs. Therefore, use a new
memory layout with a static Pci32Baseaddress.
Old layout:
[... , lowmemlimit] RAM
[lowmemlimit, 0xE000 0000] PCI Space
New layout:
[... , lowmemlimit] RAM
[lowmemlimit, gsmbase ] Memory hole (may be absent)
[gsmbase , 0xC000 0000] GSM (may be absent)
[0xC000 0000, 0xE000 0000] PCI Space
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Message-Id: <20210705110842.14088-2-c.koehne@beckhoff.com>
An USB driver is required to use a keyboard or mouse while installing
an OS or while in a bootloader menu like grub when using GPU + USB
Passthrough.
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Message-Id: <20210705110842.14088-1-c.koehne@beckhoff.com>
For non-universal payload, HandoffHobTable is used without initialization.
This patch fixed this failure.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Add Ray Ni as UefiPayloadPkg Maintainer.
Update Maurice Ma and Benjamin You as reviewers to continue support
UefiPayloadPkg patch review.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Introduce the NETWORK_ISCSI_MD5_ENABLE feature test macro for NetworkPkg.
When explicitly set to FALSE, remove MD5 from IScsiDxe's CHAP algorithm
list.
Set NETWORK_ISCSI_MD5_ENABLE to TRUE by default, for compatibility
reasons. Not just to minimize the disruption for platforms that currently
include IScsiDxe, but also because RFC 7143 mandates MD5 for CHAP, and
some vendors' iSCSI targets support MD5 only.
With MD5 enabled, IScsiDxe will suggest SHA256, and then fall back to MD5
if the target requests it. With MD5 disabled, IScsiDxe will suggest
SHA256, and break off the connection (and session) if the target doesn't
support SHA256.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210629163337.14120-7-lersek@redhat.com>
Insert a SHA256 CHAP_HASH structure at the start of "mChapHash".
Update ISCSI_CHAP_MAX_DIGEST_SIZE to SHA256_DIGEST_SIZE (32).
This enables the initiator and the target to negotiate SHA256 for CHAP, in
preference to MD5.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210629163337.14120-6-lersek@redhat.com>
Introduce the "mChapHash" table, containing the hash algorithms supported
for CHAP. Hash algos listed at the beginning of the table are preferred by
the initiator.
In ISCSI_CHAP_STEP_ONE, send such a CHAP_A value that is the
comma-separated, ordered list of algorithm identifiers from "mChapHash".
Pre-format this value string at driver startup, in the new function
IScsiCHAPInitHashList().
(In IScsiCHAPInitHashList(), also enforce that every hash algo's digest
size fit into ISCSI_CHAP_MAX_DIGEST_SIZE, as the latter controls the
digest, outgoing challenge, and hex *allocations*.)
In ISCSI_CHAP_STEP_TWO, allow the target to select one of the offered hash
algorithms, and remember the selection for the later steps. For
ISCSI_CHAP_STEP_THREE, hash the challenge from the target with the
selected hash algo.
In ISCSI_CHAP_STEP_THREE, send the correctly sized digest to the target.
If the initiator wants mutual authentication, then generate a challenge
with as many bytes as the target's digest will have, in
ISCSI_CHAP_STEP_FOUR.
In ISCSI_CHAP_STEP_FOUR (i.e., when mutual authentication is required by
the initiator), verify the target's response (digest) with the selected
algorithm.
Clear the selected hash algorithm before every login (remember that in
IScsiDxe, every login is a leading login).
There is no peer-observable change from this patch, as it only reworks the
current MD5 support into the new internal representation.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210629163337.14120-5-lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
IScsiDxe uses the ISCSI_CHAP_RSP_LEN macro for expressing the size of the
digest (16) that it solely supports at this point (MD5).
ISCSI_CHAP_RSP_LEN is used for both (a) *allocating* digest-related
buffers (binary buffers and hex encodings alike), and (b) *processing*
binary digest buffers (comparing them, filling them, reading them).
In preparation for adding other hash algorithms, split purpose (a) from
purpose (b). For purpose (a) -- buffer allocation --, introduce
ISCSI_CHAP_MAX_DIGEST_SIZE. For purpose (b) -- processing --, rely on
MD5_DIGEST_SIZE from <BaseCryptLib.h>.
Distinguishing these purposes is justified because purpose (b) --
processing -- must depend on the hashing algorithm negotiated between
initiator and target, while for purpose (a) -- allocation --, using the
maximum supported digest size is suitable. For now, because only MD5 is
supported, introduce ISCSI_CHAP_MAX_DIGEST_SIZE *as* MD5_DIGEST_SIZE.
Note that the argument for using the digest size as the size of the
outgoing challenge (in case mutual authentication is desired by the
initiator) remains in place. Because of this, the above two purposes are
distinguished for the "ISCSI_CHAP_AUTH_DATA.OutChallenge" field as well.
This patch is functionally a no-op, just yet.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210629163337.14120-4-lersek@redhat.com>
In the next patches, we'll need more room for various macro and parameter
names. For maintaining the current visual alignments, insert some
horizontal whitespace in preparation. "git show -b" produces no output for
this patch; the patch introduces no functional changes.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210629163337.14120-3-lersek@redhat.com>
RFC 7143 explains that a single iSCSI session may use multiple TCP
connections. The first connection established is called the leading
connection. The login performed on the leading connection is called the
leading login. Before the session is considered full-featured, the leading
login must succeed. Further (non-leading) connections can be associated
with the session later.
(It's unclear to me from RFC 7143 whether the non-leading connections
require individual (non-leading) logins as well, but that particular
question is irrelevant from the perspective of this patch; see below.)
The data model in IScsiDxe exhibits some confusion, regarding connection /
session association:
- On one hand, the "ISCSI_SESSION.Conns" field is a *set* (it has type
LIST_ENTRY), and accordingly, connections can be added to, and removed
from, a session, with the IScsiAttatchConnection() and
IScsiDetatchConnection() functions.
- On the other hand, ISCSI_MAX_CONNS_PER_SESSION has value 1, therefore no
session will ever use more than 1 connection at a time (refer to
instances of "Session->MaxConnections" in
"NetworkPkg/IScsiDxe/IScsiProto.c").
This one-to-many confusion between ISCSI_SESSION and ISCSI_CONNECTION is
very visible in the CHAP logic, where the progress of the authentication
is maintained *per connection*, in the "ISCSI_CONNECTION.AuthStep" field
(with values such as ISCSI_AUTH_INITIAL, ISCSI_CHAP_STEP_ONE, etc), but
the *data* for the authentication are maintained *per session*, in the
"AuthType" and "AuthData" fields of ISCSI_SESSION. Clearly, this makes no
sense if multiple connections are eligible for logging in.
Knowing that IScsiDxe uses only one connection per session (put
differently: knowing that any connection is a leading connection, and any
login is a leading login), there is no functionality bug. But the data
model is still broken: "AuthType", "AuthData", and "AuthStep" should be
maintained at the *same* level -- be it "session-level" or "(leading)
connection-level".
Fixing this data model bug is more than what I'm signing up for. However,
I do need to add one function, in preparation for multi-hash support:
whenever a new login is attempted (put differently: whenever the leading
login is re-attempted), which always happens with a fresh connection, the
session-level authentication data needs to be rewound to a sane initial
state.
Introduce the IScsiSessionResetAuthData() function. Call it from the
central -- session-level -- IScsiSessionLogin() function, just before the
latter calls the -- connection-level -- IScsiConnLogin() function.
Right now, do nothing in IScsiSessionResetAuthData(); so functionally
speaking, the patch is a no-op.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210629163337.14120-2-lersek@redhat.com>
For R_386_RELATIVE and R_X86_64_RELATIVE, today's logic assumes that
the content pointed by the Rela->r_offset is 0 but it's not always
TRUE. We observed that linker may set the content to Rela->r_addend.
The patch removes the assertion.
There is no functionality impact for this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Per ELF spec, the DT_REL/DT_RELA tag in dynamic section stores the
virtual address of the relocation section.
But today's code logic treats it as the section offset and finds
the relocation section whose offset equals to DT_REL/DT_RELA.
The logic can work when the section offset equals to the section
virtual address. But when the ELF is generated from the link script
that reserves a sizeof(pe_header) in the file beginning, the section
offset doesn't equal to section virtual address. Such logic can
not find the relocation section.
The patch fixes this bug.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3396
This is a GUI interface that can be used by users who
would like to change configuration settings directly
from the interface without having to modify the source.
This tool depends on Python GUI tool kit Tkinter.
It runs on both Windows and Linux.
The user needs to load the YAML file along with DLT file
for a specific board into the ConfigEditor, change the desired
configuration values. Finally, generate a new configuration delta
file or a config binary blob for the newly changed values to take
effect. These will be the inputs to the merge tool or the stitch
tool so that new config changes can be merged and stitched into
the final configuration blob.
This tool also supports binary update directly and display FSP
information. It is also backward compatible for BSF file format.
Running Configuration Editor:
python ConfigEditor.py
Co-authored-by: Maurice Ma <maurice.ma@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Loo Tung Lun <tung.lun.loo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Michael D Kinney
Yang Gang
Abner Chang
Sunil V L
Daniel Schaefer
gthotala
Artem Kopotev
Zhiguang Liu
Loo, Tung Lun
S, Ashraf Ali
Trammell Hudson
Tan, Dun
Pierre Gondois
Bob Feng
Chen, Christine
Laszlo Ersek
Sean Brogan
Jianyong Wu
Nickle Wang
Sheng Wei
Neal Gompa
Corvin Köhne
Guo Dong
Ray Ni