The System Memory region might be out of the 32-bit memory space.
This change has been validated on the FVP AArch64 model using 4GB
of DRAM at 0x8_0000_0000:
- # System Memory (2GB)
- gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
- gArmTokenSpaceGuid.PcdSystemMemorySize|0x80000000
+ # System Memory (4GB)
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x800000000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x100000000
EFI Shell and Linux kernel boot successfully.
Note: This change has not been validated on AArch32. I expect some
early assembly code to not work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15093 6f19259b-4bc3-4df7-8a09-765794883524
The denomination 'Normal' was used to make reference to the 'Normal'
or 'Non Secure' or 'Non Trusted' world.
To avoid confusion, this prefix has been removed from PCDs to define
the normal world.
The PCDs explicitely related to the Secure/Trusted World continue to
have the 'Sec' prefix.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12416 6f19259b-4bc3-4df7-8a09-765794883524
In the former memory model, the UEFI firmware was expected to be located
at the top of the system memory. Stacks & Pi memory regions were set below
the firmware.
On some platform, the UEFI firmware could be shadowed by the ROM firmware
(case of the BeagleBoard) and in some cases the firmware is copied at the
beginning of the system memory.
With this new memory model, stack and Pi/DXE memory regions are set at the
top of the system memory wherever the UEFI firmware is located in the memory
map.
Because DXE core does not support shadowed firmwares, the system memory covered
by the UEFI firmware is marked as 'Non Present' to avoid to be overlapped by
DXE allocations.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11992 6f19259b-4bc3-4df7-8a09-765794883524
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).
ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h
- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
Feature PCDs cannot be used in assembly files.
The PcdStandalone PCD is needed in one of the assembly file of the
ArmPlatformPkg/PrePi module.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11952 6f19259b-4bc3-4df7-8a09-765794883524
In the aim to reuse the memory init features in a PrePi module (use to
skip the PEI Core), this module has been divided into two files:
- MemoryInitPeiLib: declare the memory HOBs
- MemoryIniPeim: PEIM warpper for the library
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11950 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
oliviermartin