PL011UartLib determines its FIFO depth based on the PID2 value but
the register PID2 is not mandatory as per the SBSA spec.
This change won't check PID2 if PcdUartDefaultReceiveFifoDepth is set
to a value > 0.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PL031 interrupt mask register (IMSC) is not very clearly documented
in the PL031 specification. However, bit 0 (RTCIMSC) indicates whether
interrupts are enabled, not disabled.
So before this commit, we were actually *enabling* interrupts for the RTC.
This patch changes the logic to instead disable interrupts when they
are not disabled already.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The comments describes the device as being 32-bit:
"the maximum time span is just over 136 years"
then uses a UINTN to hold the value.
Change to UINT32 so we don't get different behaviour for different architectures.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.
This patch implements support for dynamic frequency for PL011 uart.
This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
LcdIdentify function does not currently check presence of HDLCD
controller.
Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RealTimeClockLib class is declared under EmbeddedPkg, so that
platforms can provide the internals for the
EmbeddedPkg/RealTimeClockRuntimeDxe driver. In turn the driver produces
the Real Time Clock Arch Protocol, without which UEFI drivers cannot be
dispatched.
The PL031RealTimeClockLib instance calls gDS->SetMemorySpaceAttributes()
in the LibRtcInitialize() public function. This DXE service depends on the
CPU Arch Protocol. Add it to the depex.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Convert the HdLcd specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Convert the PL111 specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add the declaration and include file for the new LcdHwLib library class,
which will allow us to abstract away from platform variations in the
LCD graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add NULL implementation as well and add it to ArmPlatformPkg.dsc]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Use LcdPlatformLib not LcdPlatformNullLib (which is the name of this
instance) as LIBRARY_CLASS attribute.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
NorFlashPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
LcdPlatformlLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmPlatformLibNullSec is built from a secondary .inf that omits
ArmPlatformLibNullMem.c from the [Sources] section so the library
can be used in a SEC context. This is slightly dodgy, given that
the resulting library is incomplete. Let's just remove this version,
since it isn't used anywhere anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
None of the platforms we support use these so remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
These modules have been imported into edk2-platforms where they belong
so remove them from the main EDK2 branch.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The only remaining user of ArmPlatformSysConfigLib has absorbed this
definition into its own edk2-platforms package, so let's remove it from
the shared code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that the last user has switched to the generic BDS, the
PlatformIntelBdsLib code in ArmPlatformPkg is no longer used, so
remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Move the internal PL031 RTC header file into the driver directory.
It shouldn't be referenced directly by other modules anyway.
While at it, sort the includes as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function ArmPlatformInitializeSystemMemory() is defined by
ArmPlatformLib, but is only ever called when using the PrePeiCore
flavor of the startup code. Also, none of the remaining upstream
platforms actually implement anything in that function in the first
place. So let's just remove it altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EBL is being phased out so remove ArmPlatformPkg's copy of EblCmdLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library is not used anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implementation of ArmPlatformSecExtraActionLib is no longer used
anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library class is not used by any drivers, so remove it in its
entirety.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove dependencies on gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize, the presence of which in
a [FixedPcd] section makes this module unusable for ArmVirtQemu.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PL011 code in ArmPlatformPkg is organized in a weird way: there is
a single PL011Uart.h header file under Include/Drivers containing both
register definitions and function entry points. The PL011Uart library
itself is in Drivers/ but it is actually a library.
So let's clean this up: add a new PL011UartLib library class and associated
header file containing only the library prototypes, and move the library
itself under Library/ using a new GUID, with the register definitions moved
into a local header file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PL031 driver implements a VExpress/Juno specific hack to set the
battery backed clock in addition to the PL031. However, none of the
remaining VExpress based hardware we support in EDK2 actuall implements
this feature so we can just remove it, and get rid of the cumbersome
dependency on ArmPlatform.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the UEFI spec, the timezone setting which the platform needs
to record in addition to the actual date and time already reflects the
current DST setting. In other words, moving the clock from standard time
to daylight saving time also involves adding or subtracting 60 minutes
from the timezone setting, as well as flicking the EFI_TIME_IN_DAYLIGHT
bit in the DST setting.
This means we need to disregard the DST setting if the timezone is
specified, and only add or subtract the additional hour if we are on
local time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library, which is intended to encapsulate the hardware specifics
of the ARM PL031 RTC, also implements its own input validation routines
and record the timezone and DST settings in its own set of EFI variables.
This functionality has recently been added to the core driver, so let's
remove it here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove the functions now provided by TimeBaseLib from
PL031RealTimeClockLib. Add TimeBaseLib resolution to ArmVirtPkg
in same commit to prevent breakage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The EBL alternative shell depends indirectly on the deprecated ARM
BdsLib via EblCmdLib, which only uses a single helper function that
can easily be cloned. So clone it, and remove the dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove ArmShellCmdRunAxf's dependency on the deprecated BdsLib by
cloning the ShutdownUefiBootServices() routine into a local source
file; this is the only BdsLib feature 'runaxf' depends on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The InitializeConsolePipe() routine takes care to only set its output
argument *Interface if it is not already set, to prevent overwriting
the ConSplitter interface pointer that may have already been assigned.
However, the associated OUT argument 'Handle' is clobbered by the
subsequent unnecessary LocateDevicePath() invocation, which should
similarly be made dependent on whether *Interface has been set
already.
Reported-by: "Lee, Terry Ping-Chung" <terry.lee@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Irene Park
Pete Batard
Laszlo Ersek
Alexander Graf
Antoine Cœur
Leif Lindholm
Michael D Kinney
Ard Biesheuvel
Udit Kumar
Girish Pathak
Girish Pathak