PlatformHostInterfaceBmcUsbNicLib is the library instance name not
the class name.
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
After BSP returned from SmmCoreEntry, there are several rounds BSP
and AP sync in BSP handler:
1 .ReleaseAllAPs(); /// Notify all APs to exit.
if (SmmCpuFeaturesNeedConfigureMtrrs()) {
2. SmmCpuSyncWaitForAPs(); /// Wait for all APs to program MTRRs.
3. ReleaseAllAPs(); /// Signal APs to restore MTRRs.
}
4. SmmCpuSyncWaitForAPs(); /// Wait for all APs to complete pending
tasks including MTRR.
5. ReleaseAllAPs(); /// Signal APs to Reset states.
6. SmmCpuSyncWaitForAPs(); /// Gather APs to exit SMM synchronously.
Before step 6 and after step 5, BSP performs below items:
A. InitializeDebugAgent() /// Stop source level debug.
B. SmmCpuUpdate() /// Perform pending operations for hot-plug.
C. Present = FALSE; /// Clear the Present flag of BSP.
For InitializeDebugAgent(), BSP needs to wait all APs complete
pending tasks and then notify all APs to stop source level debug.
So, above step 4 & step 5 are required for InitializeDebugAgent().
For SmmCpuUpdate(), it's to perform pending operations for
hot-plug CPUs take effect in next SMI. Existing APs in SMI do not
reply on the CPU switch & hot-add & hot-remove operations. So, no
need step 4 and step 5 for additional one round BSP & AP sync.
Step 6 can make sure all APs are ready to exit SMM, then hot-plug
operation can take effect in next SMI.
For BSP "Present" flag, AP does not reply on it. No need step 4
and step 5 for additional one round BSP & AP sync.
Based on above analysis, step 4 and step 5 are only required if
need configure MTRR and support SMM source level debug. So, we can
reduce one round BSP and AP sync if both are unsupported. With
this change, SMI performance can be improved.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Existing BSP handler stops source level debug, then call ReleaseAllAPs
to tell all APs can reset the Present flag to FALSE:
InitializeDebugAgent (); /// Stop source level debug
ReleaseAllAPs (); /// Tell APs can reset "Present" flag.
This patch is to invert ReleaseAllAPs & InitializeDebugAgent:
ReleaseAllAPs (); /// Tell APs can reset "Present" flag.
InitializeDebugAgent (); /// Stop source level debug
After this change, there is no negative impact since SMM source level
debug feature doesn't depend on AP's "Present" flag, no impact to the
SMM source level debug capability.
Instead, the change will benefit the AP source level debug capability
to trace its "Present" flag change for SMI exit since the source
level debug feature will be stopped after each AP has the chance to
reset the state.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Below piece of code is the BSP and AP sync logic for SMI exit.
1. AP after finish the scheduled procedure:
if (SmmCpuFeaturesNeedConfigureMtrrs ()) {
SmmCpuSyncReleaseBsp ();
SmmCpuSyncWaitForBsp ();
...
}
SmmCpuSyncReleaseBsp ();
SmmCpuSyncWaitForBsp ();
SmmCpuSyncReleaseBsp ();
2. BSP after return from SmmCoreEntry:
SmmCpuSyncWaitForAPs ();
if (SmmCpuFeaturesNeedConfigureMtrrs ()) {
ReleaseAllAPs ();
...
SmmCpuSyncWaitForAPs ();
}
ReleaseAllAPs ();
SmmCpuSyncWaitForAPs();
This patch is to make BSP same as AP sync logic:
if (SmmCpuFeaturesNeedConfigureMtrrs ()) {
SmmCpuSyncWaitForAPs ();
ReleaseAllAPs ();
...
}
SmmCpuSyncWaitForAPs ();
ReleaseAllAPs ();
SmmCpuSyncWaitForAPs();
With the change, it will be easy to understand the sync flow as
below:
BSP: SmmCpuSyncWaitForAPs <-- AP: SmmCpuSyncReleaseBsp
BSP: ReleaseAllAPs --> AP: SmmCpuSyncWaitForBsp
This patch doesn't have function impact.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
This patch is to check SMM Debug Agent support or not before
InitializeDebugAgent.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
This patch is to use the Context to indicate SMM Debug Agent support or
not if InitFlag is DEBUG_AGENT_INIT_SMM. Context must point to a
BOOLEAN if it's not NULL.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
This patch is to use the Context to indicate SMM Debug Agent support
or not if InitFlag is DEBUG_AGENT_INIT_SMM. Context must point to a
BOOLEAN if it's not NULL.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Load-module-at-fixed-address feature does not work in standalone MM core.
The patch removes the 2 dead functions and related global variables
that are related to the feature.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4533
There are use cases which not all FVs need be migrated from TempRam to
permanent memory before TempRam tears down. This new guid is introduced
to avoid unnecessary FV migration to improve boot performance. Platform
can publish MigrationInfo hob with this guid to customize FV migration
info, and PeiCore will only migrate FVs indicated by this Hob info.
This is a backwards compatible change, PeiCore will check MigrationInfo
hob before migration. If MigrationInfo hobs exists, only migrate FVs
recorded by hobs. If MigrationInfo hobs not exists, migrate all FVs to
permanent memory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Cheng Sun <chengx.sun@intel.com>
Adds API to generate AML code to invoke/call another
method. Also provides ability to pass arguments of
type integer, string, ArgObj or LocalObj.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Corrects the function pointer typedef AML_PARSE_FUNCTION,
otherwise some compiler like VS2019 gives error.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Corrects the parameters of AmlCodeGenRdWordBusNumber() to
UINT16 to generate word bus number.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add helper functions to generate AML resource data
for word I/O.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
When converting ELF to PE/COFF for the AArch64 target, we may encounter
an R_AARCH64_ADR_GOT_PAGE relocation that refers to an ADR instruction
instead of an ADRP instruction. This can happen when the toolchain is
working around Cortex-A53 erratum #843419. If that's the case, be sure
to calculate the offset appropriately.
This resolves an issue experienced when building a StandaloneMm image
(which is built with -fpie) with stack protection enabled on GCC
compiled with "--enable-fix-cortex-a53-843419". In this case, the linker
may convert an ADRP instruction appearing at an offset of 0xff8 or 0xffc
modulo 4KiB into an ADR instruction, but will leave the original
R_AARCH64_ADR_GOT_PAGE relocation in place. (This is not a bug in the
linker, given that there is no other relocation type that it could
reasonably convert it into)
In this scenario, the following code is being generated by the
toolchain:
# Load to set the stack canary
2ffc: 10028020 adr x0, 8000 <mErrorString+0x1bc>
3008: f940d400 ldr x0, [x0, #424]
# Load to check the stack canary
30cc: b0000020 adrp x0, 8000 <mErrorString+0x1bc>
30d0: f940d400 ldr x0, [x0, #424]
GenFw rewrote that to:
# Load to set the stack canary
2ffc: 10000480 adr x0, 0x308c
3008: 912ec000 add x0, x0, #0xbb0
# Load to check the stack canary
30cc: f0000460 adrp x0, 0x92000
30d0: 912ec000 add x0, x0, #0xbb0
Note that we're now setting the stack canary from the wrong address,
resulting in an erroneous stack fault.
After this fix, the offset will be calculated correctly for an ADR and
the stack canary is set correctly. Note that there is a corner case
where this may cause the conversion to fail: if the original GOT entry
is just within -/+ 1 MiB of the reference, but the actual variable it
refers to is not, the resulting offset cannot be represented by the
immediate offset field in a ADR instruction. Given that this issue only
affects PIE executables, which are rare and usually tiny, this is
unlikely to cause problems in practice.
Ref: https://edk2.groups.io/g/devel/topic/102202314
[ardb: expand commit log, add reference]
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Switches regex patterns to raw text to resolve python 3.12 syntax
warnings in regards to invalid escape sequences, as is suggested by the
re (regex) module in python.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Joey Vagedes <joey.vagedes@gmail.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
There is the SmmCpuSyncLib Library class define the SMM CPU sync
flow, which is aligned with existing SMM CPU driver sync behavior.
This patch is to consume SmmCpuSyncLib instance directly.
With this change, SMM CPU Sync flow/logic can be customized
with different implementation no matter for any purpose, e.g.
performance tuning, handle specific register, etc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
To decrease the count of RunningApCount, InterlockedDecrement is
enough to achieve that.
This patch is to simplify RunningApCount decrement.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to specify SmmCpuSyncLib instance for UefiPayloadPkg.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to specify SmmCpuSyncLib instance for OvmfPkg.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Implements SmmCpuSyncLib Library instance. The instance refers the
existing SMM CPU driver (PiSmmCpuDxeSmm) sync implementation
and behavior:
1.Abstract Counter and Run semaphores into SmmCpuSyncCtx.
2.Abstract CPU arrival count operation to
SmmCpuSyncGetArrivedCpuCount(), SmmCpuSyncCheckInCpu(),
SmmCpuSyncCheckOutCpu(), SmmCpuSyncLockDoor().
Implementation is aligned with existing SMM CPU driver.
3. Abstract SMM CPU Sync flow to:
BSP: SmmCpuSyncReleaseOneAp --> AP: SmmCpuSyncWaitForBsp
BSP: SmmCpuSyncWaitForAPs <-- AP: SmmCpuSyncReleaseBsp
Semaphores release & wait during sync flow is same as existing SMM
CPU driver.
4.Same operation to Counter and Run semaphores by leverage the atomic
compare exchange.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to add SafeIntLib in MdeLibs.dsc.inc
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Intel is planning to provide different SMM CPU Sync implementation
along with some specific registers to improve the SMI performance,
hence need SmmCpuSyncLib Library for Intel.
This patch is to:
1.Adds SmmCpuSyncLib Library class in UefiCpuPkg.dec.
2.Adds SmmCpuSyncLib.h function declaration header file.
For the new SmmCpuSyncLib, it provides 3 sets of APIs:
1. ContextInit/ContextDeinit/ContextReset:
ContextInit() is called in driver's entrypoint to allocate and
initialize the SMM CPU Sync context. ContextDeinit() is called in
driver's unload function to deinitialize SMM CPU Sync context.
ContextReset() is called before CPU exist SMI, which allows CPU to
check into the next SMI from this point.
2. GetArrivedCpuCount/CheckInCpu/CheckOutCpu/LockDoor:
When SMI happens, all processors including BSP enter to SMM mode by
calling CheckInCpu(). The elected BSP calls LockDoor() so that
CheckInCpu() will return the error code after that. CheckOutCpu() can
be called in error handling flow for the CPU who calls CheckInCpu()
earlier. GetArrivedCpuCount() returns the number of checked-in CPUs.
3. WaitForAPs/ReleaseOneAp/WaitForBsp/ReleaseBsp
WaitForAPs() & ReleaseOneAp() are called from BSP to wait the number
of APs and release one specific AP. WaitForBsp() & ReleaseBsp() are
called from APs to wait and release BSP. The 4 APIs are used to
synchronize the running flow among BSP and APs. BSP and AP Sync flow
can be easy understand as below:
BSP: ReleaseOneAp --> AP: WaitForBsp
BSP: WaitForAPs <-- AP: ReleaseBsp
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to define 3 new functions (WaitForBsp & ReleaseBsp &
ReleaseOneAp) used for the semaphore sync between BSP & AP. With the
change, BSP and AP Sync flow will be easy understand as below:
BSP: ReleaseAllAPs or ReleaseOneAp --> AP: WaitForBsp
BSP: WaitForAllAPs <-- AP: ReleaseBsp
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Currently, the ReadyToBoot event is only signaled when a formal Boot
Manager option is executed (in BmBoot.c -> EfiBootManagerBoot ()).
However, the introduction of Platform Recovery in UEFI 2.5 makes it
necessary to signal ReadyToBoot when a Platform Recovery boot loader
runs because otherwise it may lead to the execution of a boot loader
that has similar requirements to a regular one that is not launched
as a Boot Manager option.
This is especially critical to ensuring that the graphical console is
actually usable during platform recovery, as some platforms do rely on
the ConsolePrefDxe driver, which only performs console initialization
after ReadyToBoot is triggered.
This patch fixes that behavior by calling EfiSignalEventReadyToBoot ()
in EfiBootManagerProcessLoadOption () when invoking platform recovery,
which is the function that sets up the platform recovery boot process.
The expected behavior has been clarified in the UEFI 2.10 specification
to explicitly indicate this behavior is required for correct operation.
This is a rebased version of the patch originally written by Pete Batard.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2831
Co-authored-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Neal Gompa <ngompa@fedoraproject.org>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This PCD provides a way for platform to override any
HW features that are default enabled by previous stages
of FW (like OpenSBI). For the case where previous/prev
stage has disabled the feature, this override is not
useful and its usage should be avoided.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@...>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Use newly defined cache management operations for RISC-V where possible
It builds up on the support added for RISC-V cache management
instructions in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
There are different ways to manage cache on RISC-V Processors.
One way is to use fence instruction. Another way is to use CPU
specific cache management operation instructions ratified as
per RISC-V ISA specifications to be introduced in future
patches. Current method is fence instruction based, rename the
function accordingly to add that clarity.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The declarations for cache Management functions belong to BaseLib
instead of instance source file. This helps with further restructuring
of cache management code for RISC-V.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The MmCoreFfsFindMmDriver only checks for encapsulated compressed FVs.
When an inner FV is uncompressed, StandaloneMmCore will miss the FV and
all the MM drivers in the FV will not be dispatched.
Add checks for uncompressed inner FV to fix this issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
MmCoreFfsFindMmDriver() assumes FileHeader is EFI_FFS_FILE_HEADER.
If FileHeader is an EFI_FFS_FILE_HEADER2, 'FileHeader + 1' will get a
wrong section address. Use FfsFindSection to get the section directly,
instead of 'FileHeader + 1' to avoid this issue.
MmCoreFfsFindMmDriver() also assumes section is EFI_COMMON_SECTION_HEADER.
If Section is EFI_COMMON_SECTION_HEADER2, 'Section + 1' will get a wrong
wrong InnerFvHeader adress. Add section head detection and calculate the
address accordingly.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In MmCoreFfsFindMmDriver(),
- ScratchBuffer is not freed in the error return path that DstBuffer page
allocation fails. Free ScratchBuffer before return with error.
- If the decoded buffer is identical to the data in InputSection,
ExtractGuidedSectionDecode() will change the value of DstBuffer rather
than changing the contents of the buffer that DstBuffer points at, in
which case freeing DstBuffer is wrong. Introduce a local variable
AllocatedDstBuffer for buffer free, free AllocatedDstBuffer immediately
if it is not used.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
MmCoreFfsFindMmDriver() is called recursively for encapsulation sections.
Currently this recursion is not limited. Introduce a new PCD
(fixed-at-build, or patchable-in-module), and make MmCoreFfsFindMmDriver()
track the section nesting depth against that PCD.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Use error handling instead of success handling.
Less indented logic is easier to read.
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Daniel Nguyen <daniel.nguyen@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Move the range check before array access to enforce the bounds
as expected.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The DebugPeCoffExtraActionLib implemention in ArmPkg contains some cruft
that dates back to the original RVCT based ARM port, and support for
RVCT was dropped a while ago.
Also drop the handling of Cygwin specific paths, which is highly
unlikely to be still depended upon by anyone.
Tweak the logic so that only two versions of the DEBUG() invocations
remain: one for __GNUC__ when PdbPointer is set, and the fallback that
just prints the image address and the address of the entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add the long lost CI for CloudHv on AArch64.
As CloudHv CI works nearly the same way with other VMMs like KvmTool,
thus we can easily create its CI configuration based on KvmTool.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Remedy Redfish service discovery flow changes made
in commit 8736b8fd.
The above fix creates the dependency with SMBIOS 42h record,
which has a problem as SMBIOS 42h may not be created when
RedfishDiscovery.Supported() is invoked even all of the
required protocols are ready on the ControllerHandle. We can’t
guarantee SMBIOS 42 structure will be always created before
ConnectController(). USB NIC maybe detected late and it means
PlatformHostInterfaceBmcUsbNicLib can populate SMBIOS 42h
information late as well. Calling to
RedfishServiceGetNetworkInterface with the previous fix may
result in no network interface for BMC-exposed NIC as SMBIOS
42h is not ready yet.This is the first issue.
Second, to skip the network interface when
NetworkInterfaceGetSubnetInfo() returns a failure also has
problem, as the NIC may be configured via RestEx->Configure().
This happens after the Host interface is discovered, as at this
moment we have the sufficient network information to configure
BMC-exposed NIC.
Base on Redfish spec in 31.1.5.2, “EFI Redfish Client may provide
selection UI of network interfaces for Redfish service discovery.",
This means edk2 Redfish client gets all network interfaces
through RedfishServiceGetNetworkInterface and choose the desired
network interface at its discretion for Redfish service.
So the fix here is:
1. In BuildNetworkInterface(), we don’t skip any network
interface. In RedfishServiceGetNetworkInterface, we don’t
skip any network interface even the subnet information is not
retrieved. We will still return all of network interfaces to
client.
2. In RedfishServiceAcquireService for
EFI_REDFISH_RISCOVER_HOST_INTERFACE case, we don’t skip any
network interface even the subnet information is not
retrieved.
3. Added some more debug information.
Note: The subnet information is used for the scenario the system
is managed by a centralized Redfish service (not on BMC), says
the multiple Redfish computer system instances. As it mentions
in 31.1.5.2, Redfish client they may have to know the subnet
information so they can know the network domain the NIC is
connected. There may have multiple subnets in the corporation
network environment. So the subnet information provides client
an idea when they choose the network interface, so does VLAN ID.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
Acked-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Shim's PE loader uses the EFI memory attributes protocol in a way that
results in an immediate crash when invoking the loaded image, unless the
base and size of its executable segment are both aligned to 4k.
If this is not the case, it will strip the memory allocation of its
executable permissions, but fail to add them back for the executable
region, resulting in non-executable code. Unfortunately, the PE loader
does not even bother invoking the protocol in this case (as it notices
the misalignment), making it very hard for system firmware to work
around this by attempting to infer the intent of the caller.
So let's introduce a QEMU command line option to indicate that the
protocol should not be exposed at all, and a PCD to set the default for
this option when it is omitted.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/issues/1990
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Modify the gSmmBaseHobGuid consumption code to
remove the asuumption that there is only one
gSmmBaseHobGuid. If the CPU number is big enough,
there will be more than one SmmBaseHob in the
HOB list.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cache core type in MpInfo2 HOB by CpuMpPei module.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Add new field CoreType in gMpInformationHobGuid2
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Consume MpInfo2Hob in PiSmmCpuDxe driver to get
NumberOfProcessors, MaxNumberOfCpus and
EFI_PROCESSOR_INFORMATION for all CPU from the
MpInformation2 HOB.
This can avoid calling MP service.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Build MpInfo2HOB in CpuMpPei module so that later
PiSmmCpuDxe or other StandaloneMm module can consume
the HOB.
Since there might be more one gMpInformationHobGuid2
in HOB list, CpuMpPei create a gMpInformationHobGuid2
with 0 value NumberOfProcessors field in the end of the
process to indicate it's the last MP_INFORMATION2_HOB.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Create gMpInformationHobGuid2 in UefiCpuPkg.
Currently, there is a gMpInformationHobGuid defined,
created and consumed only in StandaloneMmPkg. The HOB
contains the EFI_PROCESSOR_INFORMATION structure for
each CPU and the number of processors. This is the same
as the information that PiSmmCpuDxeSmm uses MpService
Protocol to get.
This new gMpInformationHobGuid2 also contains the
NumberOfProcessors and the EFI_PROCESSOR_INFORMATION
for each CPU. Also the HOB is extended to support the
case that the maximum HOB length is not enough for all
CPU. So there might be more than one HOB instance in the
HOB list. Each HOB describes the corresponding CPU index
range.
The plan is to create gMpInformationHob2Guid in CpuMpPei
module(implemented in next commit). Then PiSmmCpuDxeSmm
and other MM_STANDALONE modules can consume the hob. This
can avoid calling MpService Protocol in PiSmmCpuDxeSmm.
Also the issue that one gMpInformationHobGuid might be not
enough when CPU number is 1~2000 or bigger can be solved.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Simplify IoRead/WriteFifo implement by repeatedly
calling IoRead/Write in the C code.
This can avoid calling assembly code to use string
I/O instructions. With this change Ia32/IoFifo.nasm
and X64/IoFifo.nasm can be removed. Then the source
files for IA32 and X64 are the same.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Change IoLibFifo.c to IoLibFifoCc.c since the
file is for Tdx and SEV in BaseIoLibIntrinsicSev.
It's also to distinguish with a new incoming
IoLibFifo.c for BaseIoLibIntrinsic.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Update the debug level comments in ArmVirt.dsc.inc to sync with
MdePkg/Include/Library/DebugLib.h.
Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Update MdePkg.uni with the manageability debug level.
Signed-off-by: Rebecca Cran <rebecca@os.amperecomputing.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Mike Maslenkin
Jiaxin Wu
Ray Ni
Cheng Sun
Abdul Lateef Attar
Jake Garver
Joey Vagedes via groups.io
Rebecca Cran
Neal Gompa
Dhaval
Wei6 Xu
Daniel Nguyen
Michael Kubacki
Ard Biesheuvel
Jianyong Wu
Abner Chang
Dun Tan