With this change, we now have these following PCDs values to define the
location of the Secure and Normal firmwares:
- gArmTokenSpaceGuid.PcdSecureFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdSecureFv(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFv(BaseAddress|Size)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11806 6f19259b-4bc3-4df7-8a09-765794883524
The size of this memory is controlled by a PCD. The Global Variable in this regsion are defined by their offset.
This memory region can be use to store the PEI Services Table Pointer.
Update the PeiServicesTablePointerLib to use this region instead of PcdPeiServicePtrAddr.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11803 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI Specification defines some requirement related to the Boot Manager.
This new version of the BDS support most of the features:
- TimeOut, BootNext, BootOrder, Boot### environment variable for boot device selection
- ConOut. ConIn, ConErr environment variables for console intialization
- Boot EFI application defined by a Device Path
- Support removable devices
- Support FileSystem, MemMap, PXE and TFTP boot devices
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11800 6f19259b-4bc3-4df7-8a09-765794883524
The previous version was using the string representation of the Device Path.
This new version takes as paramater the binary representation of the Device Path
It also tries to detect which kind of device support it refers by using the remaining
part of the Device Path after it has been loaded by gBS->ConnectController()
Lots of bug have been fixed as well in this new version.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11799 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI platform designer had to add '%a' to their EBL prompt PCD to print out the path
in the shell.
This change makes the addition of the path automatically after the platform specific value
in the EBL shell.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11798 6f19259b-4bc3-4df7-8a09-765794883524
This driver implements the interface for the PL111 Lcd controller.
The LcdPlatformLib allows to set the platform specific requirements
needed by the platform for setting the LCD (oscillators, etc).
ArmPlatformPkg/ArmVExpressPkg: Implement LcdPlatformLib
This library exports the supported resolutions. It also allocates the
memory for the framebuffer and send the correct settings to the VExpress
motherboard microcontroller.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11786 6f19259b-4bc3-4df7-8a09-765794883524
The purpose of this library is to create an interface to communicate
with the platform micro-controller.
It abstracts the communication protocol (eg: SPI, UART, etc) between
the application processor and the micro-controller.
ArmPlatformPkg/ArmVExpressPkg: Implement ArmPlaformSysConfigLib
This implementation allows to communicate with the microcontroller of the
Versatile Express motherboard.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11785 6f19259b-4bc3-4df7-8a09-765794883524
This only adds the EFI parts and not the OS specific implementation. Since the EFI parts no longer use system include files this is safe to do. Also fix two minor typos.
Signed-off-by:andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11781 6f19259b-4bc3-4df7-8a09-765794883524
Update the InOsEmuPkg to properly function with XIP. Make the Recovery FV read only. Remove the use of global variable writes from XIP code. Add a new global page that can be used in place of writting to the FD by XIP code. Think of this global page as a system SRAM.
igned-off-by: andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11771 6f19259b-4bc3-4df7-8a09-765794883524
No data should not be an error return. Causing lots of REPORT_STATUS_CODE messages out of the TerminalDxe driver.
Signed-off-by: andrewfish
Reviewed-by: andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11770 6f19259b-4bc3-4df7-8a09-765794883524
The current scheme maps a file into a memory buffer. You can write to the memory buffer, but if you restart the emulator the data is not written back to the FD. Since the build, rebuilds the FD it will blow away any changes. You can now set variables and restart the emulator and they are still set. There is a bug if the FV is set to write protect that still needs to be tracked down.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11761 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin
mdkinney
niruiyu
lgao4
andrewfish
hhuan13
jcarsey
ydong10
lzeng14