To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies SmmControl2Dxe to detect
S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies PlatformBootManagerLib to
detect S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies LockBoxLib to detect
S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
There are several functions in OvmfPkg/Library using
QemuFwCfgS3Enabled() to detect the S3 support status. However, in
MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
InitializeXenPlatform() didn't set PcdAcpiS3Enable as
InitializePlatform() did, this made the inconsistency between
drivers/functions.
For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
S3BootScript because the default value is FALSE. On the other hand,
PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
SaveS3BootScript() asserted due to EFI_NOT_FOUND.
This issue mainly affects "HVM Direct Kernel Boot". When used,
"fw_cfg" is enabled in QEMU and QemuFwCfgS3Enabled() returns true in
that case.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This commit adds code which check BootDiscoveryPolicy variable and
calls Boot Policy Manager Protocol to connect device specified by
the variable. To enable that mechanism for platform
EfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy PCD must be
added to DSC file and BootDiscoveryPolicyUiLib should be added to
UiApp libraries.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Displays the Nvme total capacity.
Signed-off-by: Cheng Zhou <zhoucheng@phytium.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
This variable is needed to track the change to
BootDiscoveryPolicy variable. Boot options should
be refreshed only if BootDiscoveryPolicy has been
changed.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Assignments of structure values cause the emission of memcpy()
intrinsics by the CLANG38 toolchain. Substitute the assignments with
calls to CopyMem() to mitigate the issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Now with everything in place for virtio 1.0 devices we can let
VirtioMmioInit() return SUCCESS.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Nothing to do here for virtio 1.0 devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add defines for the config space offsets for virtio 1.0 mmio transport.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Currently, at ExitBootServices() time, the GICv3 driver signals
End-Of-Interrupt (EOI) on all interrupt lines that are supported by the
interrupt controller. This appears to have been carried over from the
GICv2 version, but has been turned into something that violates the GIC
spec, and may trigger SError exceptions on some implementations.
Marc puts it as follows:
The GIC interrupt state machine is pretty strict. An interrupt can
only be deactivated (with or without prior priority drop) if it has
been acknowledged first. In GIC speak, this means that only the
following sequences are valid:
With EOImode==0:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
With EOImode==1:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
ICC_DIR_EL1 = x;
Any write to ICC_EOIR{0,1}_EL1 that isn't the direct consequence of
the same value being read from ICC_IAR{0,1}_EL1, and with the correct
nesting, breaks the state machine and leads to unpredictable results
that affects *all* interrupts in the system (most likely, the priority
system is dead). See Figure 4-3 ("Interrupt handling state machine")
in Arm IHI 0069F for a description of the acceptable transitions.
Additionally, on implementations that have ICC_CTLR_EL1.SEIS==1, a
SError may be generated to signal the error. See the various
<quote>
IMPLEMENTATION_DEFINED "SError ....";
</quote>
that are all over the pseudocode contained in the same architecture
spec. Needless to say, this is pretty final for any SW that would do
silly things on such implementations (which do exist).
Given that in our implementation, every signalled interrupt is acked,
handled and EOId in sequence, there is no reason to EOI all interrupts
at ExitBootServices() time in the first place, so let's just drop this
code. This fixes an issue reported by Marc where an SError is triggered
by this code, bringing down the system.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
While build the initial page table, the SetCr3ForPageTables64 checks
whether SEV-ES is enabled. If so, clear the page encryption mask from the
GHCB page. Move the logic to clear the page encryption mask in the
AmdSev.asm.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Update the SEV support to switch to using the newer work area format.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Both the TDX and SEV support needs to reserve a page in MEMFD as a work
area. The page will contain meta data specific to the guest type.
Currently, the SEV-ES support reserves a page in MEMFD
(PcdSevEsWorkArea) for the work area. This page can be reused as a TDX
work area when Intel TDX is enabled.
Based on the discussion [1], it was agreed to rename the SevEsWorkArea
to the OvmfWorkArea, and add a header that can be used to indicate the
work area type.
[1] https://edk2.groups.io/g/devel/message/78262?p=,,,20,0,0,0::\
created,0,SNP,20,2,0,84476064
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3564
This function has not been called since it was added in commit
9bedaec. If the function were to remain, it would need to be
re-evaluated and tested. This change removes the function since
it is not being used.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Cc: Marvin H?user <mhaeuser@posteo.de>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3550
Function ConvertAsn1TimeToEfiTime initializes timestamp to zeroes with
SetMem, but the actual parameters are out of order. The result is
the SetMem operation has no effect. The fix is to put the actual
parameters in the correct order.
Signed-off-by: Chris Stewart <chris.stewart@hp.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Map->Operation is used to select whether a DMA region that
is being bounced has the source buffer copied to it. Except
Map->Operation isn't yet set, so the behavior is somewhat
random. Instead use the passed in Operation parameter.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=3525
After PciSegmentLib using Dynamic PCD for Pcie base address such
long delay found in FSP. The root cause is some of the PCD service
PPIs not shadowed to memory and flash cache may have been disabled
in NotifyPhase stage. Solution is to shadow all PCD service PPIs
to memory.
Signed-off-by: GregX Yeh <gregx.yeh@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Adding two unit test case for UefiSortLib. One is a test on
sorting an array of UINT32 by using PerformQuickSort, another
is a test on comparing the same buffer by using StringCompare.
Add 'main' function name to ECC exception list to avoid ECC
error.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Changes in ArmPkg to prepare building StandaloneMm firmware for
32bit Arm architectures.
Adds ArmmmuStandaloneMmLib library to the list of the standard
components build for ArmPkg on when ARM architectures.
Changes path of source file AArch64/ArmMmuStandaloneMmLib.c
and compile it for both 32bit and 64bit architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Defines ARM_SVC_ID_FFA_* and ARM_SVC_ID_SP_* identifiers for 32bit
function IDs as per SMCCC specification. Defines also generic ARM
SVC identifier macros to wrap 32bit or 64bit identifiers upon target
built architecture.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Public the header file, move RefishCrtLib.h from PrivateInclude/
to Include/.
RefishCrtLib.lib will be public later. (Moved out from PrivateLibrary/)
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Fix a coding style issue raised by EccCheck. This issue (error code
7008) has been fixed by moving a nested union out of its structure.
Also add Acpi64.h to the "IgnoreFiles" list to stop the CI flagging
naming errors present prior to ACPI 64.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5.137, Table 5.140, Table 5.141
- Mantis ID 2138 (https://mantis.uefi.org/mantis/view.php?id=2138)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Section 5.2.26.1.1
- Mantis ID 2111 (https://mantis.uefi.org/mantis/view.php?id=2111)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5.5, Section 5.2.30
- Mantis ID 2094 (https://mantis.uefi.org/mantis/view.php?id=2094)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5.21, Section 5.2.12.19
- Mantis ID 2087 (https://mantis.uefi.org/mantis/view.php?id=2087)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Section 14.1.7, Section 14.4
- Mantis ID 2010 (https://mantis.uefi.org/mantis/view.php?id=2010)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5.59, Section 5.2.27.1 & Section 5.2.27.4
- Mantis ID 1991 (https://mantis.uefi.org/mantis/view.php?id=1991)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5.5
- Mantis ID 2133 (https://mantis.uefi.org/mantis/view.php?id=2133)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Section 5.2.25.2 System Physical Address (SPA)
Range Structure, Table 5.109
- Mantis ID 1988 (https://mantis.uefi.org/mantis/view.php?id=1988)
Also added a blank line between #defines and structure definitions to
improve readability.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Section 5.2.21.12
- Mantis ID 1975 (https://mantis.uefi.org/mantis/view.php?id=1975)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Section 5.2.24, Table 5.100 & Section 5.2.24.2
- Mantis ID 2126 (https://mantis.uefi.org/mantis/view.php?id=2126)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
Make changes to ACPI 6.4 header according to the latest specification:
- ACPI 6.4 January 2021, Table 5-9
- Mantis ID 2105 (https://mantis.uefi.org/mantis/view.php?id=2105)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
This patch introduces a header file for the ACPI specification version
6.4. Currently it is based on the Acpi63.h header file however makes
six changes:
1. Replace all occurences of "6_3"/"6.3" with "6_4/6.4".
2. Remove the trailing underscore from the header guard in accordance
with the EDK2 coding standards, section 5.3.5.
3. Make Acpi64.h the latest ACPI definition included by Acpi.h.
4. Fix the BGRT Status field comment to match the ACPI 6.3A spec.
5. Fix several typos where definitions were named "PMMT" when it should
be "PMTT".
6. Fix a typo: "PPTT Platform Communication Channel" should be "PDTT
Platform Communication Channel".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Fix the non-ascii character in UniversalPayloadEntry.c
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
This patch doesn't change the default behavior.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Change the default value of the below PCDs to diable some legacy feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE
gUefiCpuPkgTokenSpaceGuid.PcdCpuNumberOfReservedVariableMtrrs|0
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Lin, Gary (HPS OE-Linux)
Grzegorz Bernacki
zhoucheng
Marvin H?user
Gerd Hoffmann
Ard Biesheuvel
Brijesh Singh
Michael Kubacki
Stewart, Chris (SW Architect) via groups.io
Jason
Jeremy Linton
Yeh, GregX
Wenyi Xie
Etienne Carriere
Abner Chang
Chris Jones
DunTan
Zhiguang Liu