The topology of a platform is represented in ACPI using the PPTT
table. It is possible to append information to CPUs/processor
containers using their associated AML nodes in a SSDT
table.
A platform might have multiple 'physical packages' (or top-level
nodes) in their PPTT topology representation. It can be assumed
from [1] that a 'physical packages' is always a 'top-level node',
and conversely.
The SSDT topology generator doesn't support having multiple top-level
nodes. The top-level node is also not generated in the SSDT topology
representation.
Add support to generate multiple top-level nodes in the SSDT topology
generator and generate an AML node for this top-level node. This will
allow to have matching PPTT and SSDT topology representations. Prior
to this patch, this top-level AML node was not generated.
Also factorize the flag checking in CheckProcNode() and add more
checks.
This patch takes inspiration from the discussion at:
- v1: https://edk2.groups.io/g/devel/message/99410
- v2: https://edk2.groups.io/g/devel/message/99615
[1]
ACPI 6.5, 5.2.30.1 Processor hierarchy node structure (Type 0):
- "Multiple trees may be described, covering for example multiple
packages. For the root of a tree, the parent pointer should be 0.""
- "Each valid processor must belong to exactly one package. That is,
the leaf must itself be a physical package or have an ancestor
marked as a physical package."
Suggested-by: Jeff Brasen <jbrasen@nvidia.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
When scanning for the Serial Port in the device
tree, the length and value parameters to ScanMem8()
are not in the right order. This results in the
serial port not being detected if the chosen node
in the device tree has additional elements.
Therefore, pass the parameters to ScanMem8() in the
correct order to fix this issue.
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reduce the log output from Configuration Manager Object Parser
in TableHelperLib by enabling the logs only if DEBUG_INFO is
enabled.
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The Section 6.1.3, SMBIOS specification version 3.6.0 describes the
handling of test strings in SMBIOS tables.
Text strings are added at the end of the formatted portion of the SMBIOS
structure and are referenced by index in the SMBIOS structure.
Therefore, introduce a SmbiosStringTableLib to simplify the publishing
of the string set.
SmbiosStringTableLib introduces a concept of string table which records
the references to the SMBIOS strings as they are added and returns an
string reference which is then assigned to the string field in the
formatted portion of the SMBIOS structure. Once all strings are added,
the library provides an interface to get the required size for the string
set. This allows sufficient memory to be allocated for the SMBIOS table.
The library also provides an interface to publish the string set in
accordance with the SMBIOS specification.
Example:
EFI_STATUS
BuildSmbiosType17Table () {
STRING_TABLE StrTable;
UINT8 DevLocatorRef;
UINT8 BankLocatorRef;
SMBIOS_TABLE_TYPE17 *SmbiosRecord;
CHAR8 *StringSet;
...
// Initialize string table for 7 strings
StringTableInitialize (&StrTable, 7);
StringTableAddString (&StrTable, "SIMM 3", &DevLocatorRef);
StringTableAddString (&StrTable, "Bank 0", &BankLocatorRef);
...
SmbiosRecord = AllocateZeroPool (
sizeof (SMBIOS_TABLE_TYPE17) +
StringTableGetStringSetSize (&StrTable)
);
...
SmbiosRecord->DeviceLocator = DevLocatorRef;
SmbiosRecord->BankLocator = BankLocatorRef;
...
// get the string set area
StringSet = (CHAR8*)(SmbiosRecord + 1);
// publish the string set
StringTablePublishStringSet (
&StrTable,
StringSet,
StringTableGetStringSetSize (&StrTable)
);
// free string table
StringTableFree (&StrTable);
return EFI_SUCCESS;
}
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Girish Mahadevan <gmahadevan@nvidia.com>
Cc: Jeff Brasen <jbrasen@nvidia.com>
Cc: Ashish Singhal <ashishsingha@nvidia.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Cc: William Watson <wwatson@nvidia.com>
Cc: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Linux's cpu DT bindings call out arm,armv8 while the code previously
used arm,arm-v8, add second entry to support the arm,armv8 case.
Cc: Sami Mujawar <sami.mujawar@arm.com>
Fixes: e366a41ef0 ("DynamicTablesPkg: FdtHwInfoParser: Add GICC parser")
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Allow object to specify the name of processor and processor container
nodes and the UID of processor containers.
This allows these to be more accurately referenced from other tables.
For example for the _PSL method or the UID in the APMT table.
The UID and Name for processor container may be different as if the
intention is to set names as the corresponding affinity level the UID
may need to be different if there are multiple levels of containers.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
_LPI Revision should be 0 per the ACPI 6.5 specification.
"The revision number of the _LPI object. Current revision is 0."
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The following tables can now be generated by the DynamicTablesPkg:
- PCCT
- PPTT
- SRAT
Update the documentation accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
For Pcc address space, the AccessSize field of a Register is
used to delcare the Pcc Subspace Id. This Id can be up to 256.
Cf. ACPI 6.4, s14.7 Referencing the PCC address space
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Platform Communication Channel Table (PCCT) generator collates
the relevant information required for generating a PCCT table from
configuration manager using the configuration manager protocol.
The DynamicTablesManager then install the PCCT table.
From ACPI 6.4, s14 PLATFORM COMMUNICATIONS CHANNEL (PCC):
The platform communication channel (PCC) is a generic mechanism
for OSPM to communicate with an entity in the platform.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the following CmObj in the ArmNameSpaceObjects:
- CM_ARM_MAILBOX_REGISTER_INFO
- CM_ARM_PCC_SUBSPACE_CHANNEL_TIMING_INFO
- CM_ARM_PCC_SUBSPACE_GENERIC_INFO
- CM_ARM_PCC_SUBPSACE_TYPE0_INFO
- CM_ARM_PCC_SUBPSACE_TYPE1_INFO
- CM_ARM_PCC_SUBPSACE_TYPE2_INFO
- CM_ARM_PCC_SUBPSACE_TYPE3_INFO
- CM_ARM_PCC_SUBPSACE_TYPE4_INFO
- CM_ARM_PCC_SUBPSACE_TYPE5_INFO
These objects allow to describe mailbox registers, pcc timings
and PCCT subspaces. They prepare the enablement of a PCCT generator.
Also add the CmObjParsers associated to each object.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The second model of the _PRT object is used. Indeed:
- the interrupts described are not re-configurable
- OSes are aware of the polarity of PCI legacy interrupts,
so there is no need to accurately describe the polarity.
Also, fix a comment for the CM_ARM_PCI_INTERRUPT_MAP_INFO obj.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 13136cc311 ("DynamicTablesPkg: FdtHwInfoParserLib:
Parse Pmu info")
adds support for pmu parsing. Thus, remove the wrong comment.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 691c5f7762 ("DynamicTablesPkg: Deprecate Crs specific methods
in AmlLib")
deprecates some APIs. Finally remove them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add missing fields to the following CmObjParser objects:
- EArmObjGicDInfo
- EArmObjCacheInfo
and fix wrong formatting of:
- EArmObjLpiInfo
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CmObjParsers of the following objects was inverted, probably
due to a wrong ordering placement in the file defining the structures:
-EArmObjGTBlockTimerFrameInfo
-EArmObjPlatformGTBlockInfo
Assign the correct parser for each object, and re-order the
structures in the file defining them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 0d23c447d6 ("DynamicTablesPkg: Add support to specify FADT
minor revision")
adds new 'MinorRevision' field to CM_STD_OBJ_ACPI_TABLE_INFO.
Reflect the change in this patch to the CmObjectParser.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit de200b7e2c ("DynamicTablesPkg: Update ArmNameSpaceObjects for
IORT Rev E.d")
adds new CmObj structures and fields to the ArmNameSpaceObjects.
Update the CmObjectParser accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a PrintString to print strings in the CmObjParser.
String must be NULL terminated and no buffer overrun check
is done by this function.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In C, the 'long long' types are 64-bits. The 'll' printf length
specifier should be used to pring these values. Just '%x' allows to
print values that are on 16-bits or more. Use that instead.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add code to use a token attached to GICC to generate _CPC object on cpus.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
_CPC entries can describe CPU performance information.
The object is described in ACPI 6.4 s8.4.7.1.
"_CPC (Continuous Performance Control)".
Add AmlCreateCpcNode() helper function to add _CPC entries to an
existing CPU object.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the CM_ARM_CPC_INFO CmObj in the ArmNameSpaceObjects.
This allows to describe CPC information, as described in ACPI 6.4,
s8.4.7.1 "_CPC (Continuous Performance Control)".
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for selecting to use index or segment number as UID and name.
This allows the path of the nodes to be well known.
For example, if the PCIe node needs to be notified from by an interrupt
for a Generic Event Device
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Current code will generate duplicate UID if there are nested processor
containers in the topology. For example if there is a
socket/cluster/core layout.
Change references to processor container from cluster to be more
accurate on what is being created.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add APIs needed to build _DSD with different UUIDs.
This is per ACPI specification 6.4 s6.2.5.
Adds support for building data packages with format
Package {"Name", Integer}
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3998
Certain OSes will complain if the ECAM config space is not reserved in
the ACPI namespace.
This change adds a function to reserve PNP motherboard resources for a
given PCI node.
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3997
This change added an extra step to allow check for installed ACPI tables.
For FADT, MADT, GTDT, DSDT, DBG2 and SPCR tables, either pre-installed or
supplied through AcpiTableInfo can be accepted.
An extra check for FADT ACPI table existence during installation step is
also added.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@Arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
This change added more token fixers for other node types, including
NamedComponentNode, RootComplexNode, and SmmuV3Node.
The corresponding entries for tokenFixer functions table is also updated.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
The content of token should be derived from the data section of the
`CmObject` instead of the object itself.
This change fixed the issue by dereferencing the token value from the
data buffer of input CmObject.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3996
The DynamicPlatRepoLib has multiple reference to MemoryAllocationLib,
such as DynamicPlatRepo.c and TokenMapper.c. Not including it in the
library inf file could lead to potential build break.
This change added the MemoryAllocationLib into this inf file.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Co-authored-by: Joe Lopez <joelopez@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add
an additional check for ACPI version. This fixes a crash running on
kvmtool.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add support library to allow for customization of _OSC and slot info.
The functions in the library are unchanged,
with the exception of adding PciInfo pointer to the APIs.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for PCIe devices with UID > 0xF.
This is done by using the next value in the name so
PCI5, PC26, etc
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The translation value in ACPI should be the difference between the CPU and PCIe address.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
SSDT tables describing an SBSA compatible serial port receive an '_HID'
value of 'ARMH0011'. This value represents a PL011 serial port.
This patch:
- Generates an 'ARMHB000' instead
- References the 'ACPI for Arm Components 1.0 - 2020' document
specifying the '_HID' values to use.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Tested-by: Sunny Wang <sunny.wang@arm.com>
Add AmlCodeGenMethodRetInteger function to generate AML code for
a Method returning an Integer.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Pierre Gondois
Sami Mujawar
Moritz Fischer
Jeff Brasen
Michael Kubacki
Rebecca Cran
Kun Qin
Edward Pickup
Rebecca Cran