The ShellCommandRunSetVar() function calls the ShellIsHexOrDecimalNumber()
UefiShellLib function to determine if the data string in the SETVAR
command is a string of hexadecimal bytes.
However, ShellIsHexOrDecimalNumber() calls ShellConvertStringToUint64()
for validation. Therefore SETVAR rejects hex strings that cannot be
interpreted as UINT64 values due to range errors, despite the fact that
the hexadecimal data string of the SETVAR command is supposed to describe
an arbitrary array of bytes, rather than UINT64 values.
The internal library function InternalShellIsHexOrDecimalNumber() comes
close, as the first idea for the fix, however it is not quite right
either; it removes a leading minus sign, plus it allows 0x / 0X prefixes.
This would not be correct for the SETVAR command.
Instead, add a trivial utility function that is specific to the SETVAR
implementation. IsStringOfHexNibbles() accepts empty strings for
simplicity, but where we call it we have already ensured that the data
string is not empty (because that is handled earlier by the "delete
variable" branch of SETVAR). An even number of nibbles is also enforced
near the call site.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17128 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (such as ARM toolchain) complain if there is
no new line at the end of a source file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17105 6f19259b-4bc3-4df7-8a09-765794883524
smbiosview can dump 64-bit entry point and table
as long as SMBIOS 3.0 table exists in system configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17060 6f19259b-4bc3-4df7-8a09-765794883524
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
Fixed smbiosview to use correct value to parse Type 27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17007 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16004 6f19259b-4bc3-4df7-8a09-765794883524
For Invalid character ‘-’ in Pci.c line 806 and line 811, using ASCII
encoding byte 0x2d to replace.
Example error from GCC 4.9:
ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c:806:5: error: converting to execution character set: Invalid or incomplete multibyte or wide character
L"Ethernet (802.11a � 5 GHz)",
^
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15889 6f19259b-4bc3-4df7-8a09-765794883524
This updated the strings to be compliant with PCI CODE AND ID ASSIGNMENT SPECIFICATION 1.5.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15885 6f19259b-4bc3-4df7-8a09-765794883524
As the shell inverts foreground and background it needs to be sure that it properly masks off the reserved bits and this is important since the foreground and background are not the same numbers of bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15681 6f19259b-4bc3-4df7-8a09-765794883524
The comp command was potentially displaying the incorrect offset into the file due to comparing 3 extra bytes for difference groups.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15558 6f19259b-4bc3-4df7-8a09-765794883524
It's invalid to set a variable that's available from runtime services but not
from boot services.
Currently if you pass '-rt' without '-bs' you get a generic
'Invalid Parameter' message. We should either print a more useful message in
this case, or make '-rt' imply '-bs' (as this patch does). The Shell Spec is
ambiguous on the matter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <Brendan.Jackman@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15323 6f19259b-4bc3-4df7-8a09-765794883524
The file format is as below:
<File> := <Variable>+
<Variable> := <Name-Size> <Data-Size> <Name> <GUID> <Attributes> <Data> <Crc32>
Each variable representation in the file has a CRC32 value which can provide a mechanism to detect the file modification.
When any CRC32 is incorrect, dmpstore rejects to load the variables from the file.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15083 6f19259b-4bc3-4df7-8a09-765794883524
there is a new non-spec parameter "-_e" which allows additional information output to be controlled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15070 6f19259b-4bc3-4df7-8a09-765794883524
Liming Gao
Laszlo Ersek
Olivier Martin
Elvin Li
Tapan Shah
Qiu Shumin
jcarsey
Jaben Carsey
Samer El-Haj-Mahmoud elhaj
Chris Phillips
Eric Dong
Jeff Bobzin (jeff.bobzin
Brendan Jackman
Tian, Hot
Ruiyu Ni