If XD is supported, then SMM enables it. The non-SMM execution
environment can choose to enable or disable XD, so the state of
XD must be detected in each SMI and be enabled/restored.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The function CheckFeatureSupported() is used as an EFI_AP_PROCEDURE
in the MP Services Protocol service StartAllAPs(). Any function
used as an EFI_AP_PROCEDURE must use EFIAPI calling convention.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update S3 resume path to initialize the fields of gSmst before
the gSmst fields are used to complete initialization in S3 resume.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19504 6f19259b-4bc3-4df7-8a09-765794883524
Use Bit 29 of CPUID leaf CPUID_EXTENDED_CPU_SIG (0x80000001) to
determine the SMM save state mode. The previous version of this
code used CPUID leaf CPUID_VERSION_INFO (0x00000001).
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19503 6f19259b-4bc3-4df7-8a09-765794883524
If PcdCpuSmmDebug is set to TRUE, then the first time the function
CpuSmmDebugEntry () is called during the first normal SMI, the
registers DR6 or DR7 may be set to invalid values due to gSmst
not being fully initialized yet. Instead, use gSmmCpuPrivate that
is fully initialized for the first SMI to look up CpuSaveState
for the currently executing CPU.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19502 6f19259b-4bc3-4df7-8a09-765794883524
If ApLoopMode is ApInHltLoop, BSP will send INIT-SIPI-SIPI to wake up APs.
If ApLoopMode is ApInMwaitLoop or ApInRunLoop, BSP will write one semaphore to
wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19346 6f19259b-4bc3-4df7-8a09-765794883524
After AP function is executed, we will place AP in proper loop mode. Because AP
maybe waken up by SMI or other reasons. We need to read signature in monitor
buffer to check if APs is waken up by BSP. If it is not waken up by BSP, we will
continue to place them into proper loop mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19345 6f19259b-4bc3-4df7-8a09-765794883524
Get AP loop mode to prepare for the monitor buffer required for ApInMwaitLoop
and ApInRunLoop.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19344 6f19259b-4bc3-4df7-8a09-765794883524
Add GetApLoopMode() that will get PCD PcdCpuApLoopMode firstly. If it is
ApInMwaitLoop, we will check if MONITOR/MWAIT feature supported by CPUID. If
MONITOR/MWAIT feature is not supported, force AP loop mode to ApInHltLoop.
GetApLoopMode() also return the largest line size required.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19343 6f19259b-4bc3-4df7-8a09-765794883524
This new PCD is used to specify the AP C-state value by MWAIT instruction.
More deeper C-state means more longer latency time when APs exiting from MWAIT
state. Platforms need to balance the performance and power saving to find the
proper C-state for APs.
Also, some processor may not ready for the deepest C-state at the beginning.
Platform also could choose the proper chance to place AP into the deeper C-state
by set this PCD before hand-off to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19342 6f19259b-4bc3-4df7-8a09-765794883524
This new PCD is used to specify the AP loop mode during POST phase.
The value 1 means we will place AP in the Hlt-Loop state by HLT instruction.
BSP need to send INIT-SIPI-SIPI to wake up APs.
The value 2 means we will place AP in the deepest C-state by MWAIT instruction.
BSP need to modify the monitor buffer by MONITOR instruction to wake up APs.
The value 3 means we will place AP in the Run-loop state. APs are running.
BSP need to write one semaphore to wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19341 6f19259b-4bc3-4df7-8a09-765794883524
Packing alignment for MP_CPU_EXCHANGE_INFO should be 1. This should be typo when
check-in CpuMpPei driver. IA32 arch MP_CPU_EXCHANGE_INFO is luckly pack(1). It
leads CpuMpPei x64 version hung.
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19340 6f19259b-4bc3-4df7-8a09-765794883524
To convert these files I ran:
$ python3 BaseTools/Scripts/ConvertUni.py UefiCpuPkg
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19264 6f19259b-4bc3-4df7-8a09-765794883524
'.' should be '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19226 6f19259b-4bc3-4df7-8a09-765794883524
Add new API MtrrSetMemoryAttributeInMtrrSettings() in MtrrLib. Platform could
use this API to set MTRR setting into local MTRR settings buffer instead of
MTRRs. At last, platform could use MtrrSetAllMtrrs() to set the MTRR settings
into MTRRs totally. It could improve MTRRs programming performance obviously,
specially when platform is going to program a set of MTRRs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19162 6f19259b-4bc3-4df7-8a09-765794883524
MtrrDebugPrintAllMtrrsWorker() provides the capability to dump the MTRR setting
from MTRRs or the input MTRR settings buffer.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19161 6f19259b-4bc3-4df7-8a09-765794883524
When MtrrSetMemoryAttribute() programs variable MTRRs, it may disable/enable
cache and disable/enable MTRRs several times. This updating tries to do
operation in local variable and does the hardware initialization one time only.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19158 6f19259b-4bc3-4df7-8a09-765794883524
When MtrrSetMemoryAttribute() programs fixed MTRRs, it may disable/enable cache
and disable/enable MTRRs several times. This updating tries to do operation in
local variable and does the hardware initialization one time only.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19157 6f19259b-4bc3-4df7-8a09-765794883524
Add function to shadow the content of variable MTRRs into an internal array:
VariableMtrr. And used MtrrGetMemoryAttributeInVariableMtrrWorker() in other
functions.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19156 6f19259b-4bc3-4df7-8a09-765794883524
Try to make use of worker functions to get MTRRs count. It could avoid invoking
IsMtrrSupported() for many times.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19155 6f19259b-4bc3-4df7-8a09-765794883524
Only adjust functions order and there is no any real functionality impact.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19154 6f19259b-4bc3-4df7-8a09-765794883524
Abstract some worker functions not to invoke IsMtrrSupported(). They could be
used by other functions to reduce the number of invoking times on
IsMtrrSupported().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19153 6f19259b-4bc3-4df7-8a09-765794883524
Current MtrrLib reserves 2 variable MTRRs for some legacy OS boot (CSM boots)
may require some MTRRs to be reserved for OS use. But UEFI OS boot will not use
MTRRs.
Per Scott's suggestion in
link: http://article.gmane.org/gmane.comp.bios.edk2.devel/4099
Add one PCD PcdCpuNumberOfReservedVariableMtrrs to specify the number of
variable MTRRs reserved for OS use. Setting its default value to 2 is for
back-compatibility.
Cc: Scott Duplichan <scott@notabs.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Suggested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19151 6f19259b-4bc3-4df7-8a09-765794883524
PeiStartupAllAPs()/PeiStartupThisAP() will send INIT-SIPI-SIPI to wakeup APs to
execute AP function. However, some registers will be reset after APs received
INIT IPI. We need to restore some registers (For example, CRx/DRx) manually
after APs wakeup.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19089 6f19259b-4bc3-4df7-8a09-765794883524
Save BSP's volatile register and sync CRx register to APs when AP 1st wake up.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19088 6f19259b-4bc3-4df7-8a09-765794883524
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19086 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation only exchanges the APIC ID and BIST, this updating is to
exchange all CPU data.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19085 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
It is REPOST.
It includes suggestion from Michael Kinney <michael.d.kinney@intel.com>:
- "For IA32 assembly, can we combine into a single OR instruction that
sets both page enable and WP?"
- "For X64, does it make sense to use single OR instruction instead of 2
BTS instructions as well?"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19068 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
This is REPOST.
It includes the bug fix from "Paolo Bonzini" <pbonzini@redhat.com>:
Title: fix generation of 32-bit PAE page tables
"Bits 1 and 2 are reserved in 32-bit PAE Page Directory Pointer Table
Entries (PDPTEs); see Table 4-8 in the SDM. With VMX extended page
tables, the processor notices and fails the VM entry as soon as CR0.PG
is set to 1."
And thanks "Laszlo Ersek" <lersek@redhat.com> to validate the fix.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Signed-off-by: "Paolo Bonzini" <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19067 6f19259b-4bc3-4df7-8a09-765794883524
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to
allow CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely
processed.
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18979 6f19259b-4bc3-4df7-8a09-765794883524
Always set RW+P bit for page table by default.
So that we can use write-protection for code later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18960 6f19259b-4bc3-4df7-8a09-765794883524
Add NULL func for 2 new APIs in SmmCpuFeaturesLib.
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to allow
CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely processed.
Add SmmCpuFeaturesCompleteSmmReadyToLock() to PerformRemainingTasks() and PerformPreTasks().
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
All page table allocation will use AllocatePageTableMemory().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18958 6f19259b-4bc3-4df7-8a09-765794883524
We had better separate code from data in tile in page level,
so that other program may use page level protection on that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18957 6f19259b-4bc3-4df7-8a09-765794883524
This module initializes the ACPI_CPU_DATA structure and registers the
address of this structure in the PcdCpuS3DataAddress PCD. This is a
generic/simple version of this module. It does not provide a machine
check handler or CPU register initialization tables for ACPI S3 resume.
It also only supports the number of CPUs reported by the MP Services
Protocol, so this module does not support hot plug CPUs. This module
can be copied into a CPU specific package and customized if these
additional features are required.
This patch series is in response to the OvmfPkg patch series from
Laszlo Ersek that enables SMM on OVMF. The v4 version of the patch
series from Laszlo includes an OVMF specific CPU module to initialize
the ACPI_CPU_DATA structure.
This proposed patch series replaces the patches listed below.
[PATCH v4 27/41] OvmfPkg:
add skeleton QuarkPort/CpuS3DataDxe
[PATCH v4 28/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.StartupVector
[PATCH v4 29/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle IDT, GDT and MCE in ACPI_CPU_DATA
[PATCH v4 30/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle StackAddress and StackSize
[PATCH v4 31/41] OvmfPkg:
import CpuConfigLib header from Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg
[PATCH v4 32/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.NumberOfCpus
[PATCH v4 33/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.MtrrTable
[PATCH v4 34/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle register tables in ACPI_CPU_DATA
[PATCH v4 35/41] OvmfPkg:
port CpuS3DataDxe to X64
patch originally authored by Paolo Bonzini
[PATCH v4 36/41] OvmfPkg:
build QuarkPort/CpuS3DataDxe for -D SMM_REQUIRE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18951 6f19259b-4bc3-4df7-8a09-765794883524
Provide a more detailed description of each field of the
ACPI_CPU_DATA and CPU_REGISTER_TABLE structures.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18950 6f19259b-4bc3-4df7-8a09-765794883524
SmmDebug feature is implemented in ASM, which is not easy to maintain.
So we move it to C function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18946 6f19259b-4bc3-4df7-8a09-765794883524
In this way, we can centralize the silicon configuration in
PerformRemainingTasks()/PerformPreTasks() function.
If there are more features need to be configured, they can put in
PerformRemainingTasks()/PerformPreTasks() only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18938 6f19259b-4bc3-4df7-8a09-765794883524
Move Gdt initialization from InitializeMpServiceData() to CPU Arch specific function.
We create SmmFuncsArch.c for hold CPU specific function, so that
EFI_IMAGE_MACHINE_TYPE_SUPPORTED(EFI_IMAGE_MACHINE_X64) can be removed.
For IA32 version, we always allocate new page for GDT entry, for easy maintenance.
For X64 version, we fixed TssBase in GDT entry to make sure TSS data is correct.
Remove TSS fixup for GDT in ASM file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18937 6f19259b-4bc3-4df7-8a09-765794883524
TSS segment should use (SIZE - 1) as limit, and do not set G bit (highest bit of LimitHigh) because limit means byte count.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18935 6f19259b-4bc3-4df7-8a09-765794883524
If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18934 6f19259b-4bc3-4df7-8a09-765794883524
If there are any logical processor reporting an APIC ID of 255 or greater, set
X2ApicEnable flag.
GetInitialApicId() will return x2APIC ID if CPUID leaf B supported.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18933 6f19259b-4bc3-4df7-8a09-765794883524
The CpuDxe driver may run before the gEfiMetronomeArchProtocolGuid
protocol is installed. gBS->Stall does not work until this arch
protocol is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18914 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
We need to check if SmmFeatureControl support or not by checking
SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP.
Because MSR_SMM_MCA_CAP is SMM-RO register, we should move this check from
SmmCpuFeaturesLibConstructor (non-SMM) to SmmCpuFeaturesInitializeProcessor
(SMM).
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18906 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18905 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module is using PcdFrameworkCompatibilitySupport to
provide compatibility with the SMM support in the IntelFrameworkPkg.
This change removes the Framework compatibility and requires all SMM
modules that provide SMI handlers to follow the PI Specification.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18726 6f19259b-4bc3-4df7-8a09-765794883524
In ConfigSmmCodeAccessCheck(), we used gSmst->CurrentlyExecutingCpu to get the
current SMM BSP. But ConfigSmmCodeAccessCheck() maybe invoked before executing
SmmCoreEntry() and gSmst->CurrentlyExecutingCpu hasn't been updated to the
latest value. The code flow is as below:
BSPHandler()
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu = CpuIndex;
//
// when mRestoreSmmConfigurationInS3 is set:
//
ConfigSmmCodeAccessCheck()
//
// reads gSmst->CurrentlyExecutingCpu to early
//
gSmmCpuPrivate->SmmCoreEntry (&gSmmCpuPrivate->SmmCoreEntryContext)
//
// sets gSmst->CurrentlyExecutingCpu with CopyMem() too late
//
CopyMem (&gSmmCoreSmst.SmmStartupThisAp,
SmmEntryContext, sizeof (EFI_SMM_ENTRY_CONTEXT));
Instead, we should use
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18715 6f19259b-4bc3-4df7-8a09-765794883524
The LocalApicLib does not provide a function to manage the state of the
Local APIC SoftwareEnable bit in the Spurious Vector register. There
are cases where this bit needs to be managed without side effects to.
other Local APIC registers. One use case is in the DebugAgent in the
SourceLevelDebugPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors
that are based on the GDT layout from the DxeIplPeim. For example,
the protected mode entry code and (where appropriate) the long mode
entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly
files, which are used during S3 resume, open-code segment selector
values that depend on DxeIplPeim's GDT layout.
This updates the CpuDxe module to use the same GDT layout as the
DxeIplPeim. This enables modules that are dispatched after
CpuDxe to find, and potentially save and restore, a GDT layout that
matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for
data selectors that are identical. These are LINEAR_SEL (GDT Offset
0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for
for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This
duplicate data selector was added to the CpuDxe module to keep the
GDT and all selectors consistent.
Using a consistent GDT also improves debug experience.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3568
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18710 6f19259b-4bc3-4df7-8a09-765794883524
Add support for the reading and writing MSR_SMM_FEATURE_CONTROL
through the SmmCpuFeaturesIsSmmRegisterSupported(),
SmmCpuFeaturesGetSmmRegister(), and SmmCpuFeaturesSetSmmRegister()
functions. This MSR is supported if the Family/Model is 06_3C,
06_45, or 06_46.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18690 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about
whether the set operation is successful or not. PcdSet##S were added to
return error status and PcdSet## APIs were put in ifndef
DISABLE_NEW_DEPRECATED_INTERFACES condition. To adopt PcdSet##S and
further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined,
we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii
PCD set failure is a legal case. So for DynamicDefault, we add assert
when set failure. For DynamicHii, we add logic to handle it.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18686 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
Add the PiSmmCpuDxeSmm module to the UefiCpuPkg DSC file along
with this modules dependent libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18648 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18647 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18646 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuHotPlugData.h that defines a data structure that is shared between
modules and is required for to support hot plug CPUs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18643 6f19259b-4bc3-4df7-8a09-765794883524
Add AcpuCpuData.h that defines a data structure that is shared between
modules and is required for ACPI S3 support.
APState field removed between V1 and V2 patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18642 6f19259b-4bc3-4df7-8a09-765794883524
Add SmramSaveStateMap.h file that defines the 32-bit and 64-bit CPU
SMRAM Save State Map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18641 6f19259b-4bc3-4df7-8a09-765794883524
Add definition of the SMM CPU Service Protocol that is produced by
the PiSmmCpuDxeSmm module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18640 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuPlatformHookLib that provides platform specific functions
that are used to initialize SMM and process SMIs. A Null instance
of this library is provided that should work for most platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18639 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuFeaturesLib that provides CPU specific functions that are
used to initialize SMM and process SMIs. A functional implementation
of this library class is provided that is based on the
Intel(R) 64 and IA-32 Architectures Software Developer's Manual
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18638 6f19259b-4bc3-4df7-8a09-765794883524
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
Add PlatformSecLib class and PlatformSecLibNull instance
that is used by the SecCore. PlatformSecLibNull should
not be used in a platform build. Instead, it should be
used as a template for implementing a platform specific
instance of the PlatformSecLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18635 6f19259b-4bc3-4df7-8a09-765794883524
Add modules that produce the SMM Communications PPI and
install a SW SMI handler for SMM Communication requests
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18634 6f19259b-4bc3-4df7-8a09-765794883524
Move CPUID related defines from LocalApic.h to Cpuid.h
Update LocalApicLib instances to include Cpuid.h
Update CpuMpPei module to include Cpuid.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18633 6f19259b-4bc3-4df7-8a09-765794883524
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
Address a race condition in first call to StartupAllAPs() with
SingleThread set to TRUE in the MP initialization. If the APs
have not entered their idle loop before StartupAllAPs() is called,
then some of the APs will be in an unexpected state, and
StartupAllAPs() will hang. This is the hang condition that is
only seen when SingleThread parameter is set to TRUE and
StartupAllAPs() is called very shortly after mAPsAlreadyInitFinished
is set to TRUE that releases the APs to complete their initialization.
An internal function has been added to check if all APs are in the
sleeping state in their idle loop. On the first call to
StartupAllAPs(), this internal function is used in a loop to make
sure the APs are in a state that is compatible with the use of
StartupAllAPs(). PcdCpuApInitTimeOutInMicroSeconds is used as the
maximum wait time for the APs to enter their idle loop. If all
APs have not entered their idle loop within the timeout, then
an ASSERT() is generated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18631 6f19259b-4bc3-4df7-8a09-765794883524
Use PcdCpuApInitTimeOutInMicroSeconds instead of hardcoded 100ms for
the time to wait for all APs to respond to first INIT SIPI SIPI
wake request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18630 6f19259b-4bc3-4df7-8a09-765794883524
Only perform AP detection if PcdCpuMaxLogicalProcessorNumber > 1
Only free AP related structures of they were allocated
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18629 6f19259b-4bc3-4df7-8a09-765794883524
Add an ASSERT in GetApicTimerState() to check if the local APIC is
software enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18595 6f19259b-4bc3-4df7-8a09-765794883524
When the local APIC is not configurated properly, function
GetApicTimerInitCount() in LocalApicLib may return zero, which will lead
to a divide by zero exception in SecPeiDxeTimerLibUefiCpu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18594 6f19259b-4bc3-4df7-8a09-765794883524
CpuData buffer should be located in allocated buffer instead of at end of
WakeupBuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18550 6f19259b-4bc3-4df7-8a09-765794883524
Per IA32 SDM, if CPUID.80000008H is not available, software may assume that the
processor supports a 36-bit physical address size.
However, for such old processors (For example, Quark processor),
MtrrValidBitsMask and MtrrValidAddressMask values are reverted and wrong in
MtrrLib. MtrrValidBitsMask should be 0xFFFFFFFFFULL and MtrrValidAddressMask
should be 0xFFFFFF000ULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18396 6f19259b-4bc3-4df7-8a09-765794883524
CPU Healthy state maybe changed by software. We should return Healthy state
from Healthy bit instead of from CPU BIST hardware information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18374 6f19259b-4bc3-4df7-8a09-765794883524
when stack NX has been enabled for BSP.
DxeIpl may have enabled Execute Disable for BSP,
APs need to get the status and sync up the settings,
otherwise EFI_MP_SERVICES_PROTOCOL->StartupAllAPs
may not work.
Got positive comments and test result from Laszlo
for the early draft patch, thanks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18191 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuMpEndOfPeiCallback () to restore wakeup buffer data on S3 path and flag
flag wakeup buffer to be un-used type on normal boot path. Set one EndOfPei
flag save/restore wakeup buffer when wakeup APs every time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18014 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney
Hao Wu
Liming Gao
Jeff Fan
Jordan Justen
Yao, Jiewen
Laszlo Ersek
Star Zeng
Qiu Shumin