According to edk2 commit
"MdeModulePkg/PciBus: do not improperly degrade resource"
and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the
Platform Init 1.4a specification, a platform can provide such a protocol
in order to influence the PCI resource allocation performed by the PCI Bus
driver.
In particular it is possible instruct the PCI Bus driver, with a
"wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit
address space, regardless of whether the device features an option ROM.
(By default, the PCI Bus driver considers an option ROM reason enough for
allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if
BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS
binary from a combined option ROM could be dispatched, and fail to access
MMIO BARs in 64-bit address space.)
In platform code we can ascertain whether a CSM is present or not. If not,
then legacy BIOS binaries in option ROMs can't be dispatched, hence the
BAR degradation is detrimental, and we should prevent it. This is expected
to conserve the 32-bit address space for 32-bit MMIO BARs.
The driver added in this patch could be simplified based on the following
facts:
- In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence
the driver will exit immediately. Therefore the driver could be omitted
from the Ia32 build.
- In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE
was defined (because in that case the degradation would be justified).
On the other hand, if CSM_ENABLE was undefined, then the driver could be
included, and it could provide the hint unconditionally (without looking
for the Legacy BIOS protocol).
These short-cuts are not taken because they would increase the differences
between the OVMF DSC/FDF files. If we can manage without extreme
complexity, we should use dynamic logic (vs. build time configuration),
plus keep conditional compilation to a minimum.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This library instance is no longer referenced.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reasons:
- USE_OLD_BDS requires duplicating updates between OVMF's library
instances that depend on USE_OLD_BDS being FALSE vs. TRUE. Examples:
d5aee61bfa OvmfPkg/QemuNewBootOrderLib: adapt Q35 SATA PMPN to UEFI
spec Mantis 1353
1da7616649 OvmfPkg/QemuBootOrderLib: adapt Q35 SATA PMPN to UEFI spec
Mantis 1353
- The Xen community has embraced the new BDS. Examples:
14b2ebc30c OvmfPkg/PlatformBootManagerLib: Postpone the shell
registration
49effaf26e OvmfPkg/PciHostBridgeLib: Scan for root bridges when
running over Xen
- OVMF doesn't build with "-D USE_OLD_BDS -D HTTP_BOOT_ENABLE" anyway, as
NetworkPkg/HttpBootDxe now requires UefiBootManagerLib:
50a65824c7 NetworkPkg: Use UefiBootManagerLib API to create load
option.
We (correctly) don't resolve UefiBootManagerLib when USE_OLD_BDS is
TRUE.
- The new BDS has been working well; for example it's the only BDS
available in ArmVirtPkg:
1946faa710 ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "UNIXGCC Debug" section happens to name PlatformBdsLib and
IntelFrameworkModulePkg's BdsDxe as examples. OVMF will soon stop offering
those even as a fallback option.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The following codes are useless and cause memory leak issues.
So now remove them.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when user don't set TOOL_CHAIN_TAG and TARGET by –D Flag, then GenFds
would report failure for format:
FILE DATA = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/testfile
so this patch enhance to get the TOOL_CHAIN_TAG and TARGET value by
following priority (high to low): 1. the Macro value set by -D Flag;
2. Get the value by the -t/-b option. 3. get the value from target.txt
file. Besides, this patch also remove the error checking for missing
-t/-b option.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Update MSRs semaphores to the ones in allocated aligned semaphores
buffer. If MSRs semaphores is not enough, allocate one page more.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Update each CPU semaphores to the ones in allocated aligned
semaphores buffer.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Allocate each CPU semaphores in allocated aligned semaphores buffer.
And add it into semaphores structure.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Update all global semaphores to the ones in allocated aligned
semaphores buffer.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Move MP sync data initialization in front of the place that initialize
page table, because the page fault spin lock is allocated in
InitializeMpSyncData() while it is initialized in SmmInitPageTable().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Get semaphores alignment/size requirement and allocate aligned
buffer for all global spin lock and semaphores.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add more comments:
1) EDKII version safe string function is similar as the one C11.
2) If error is returned, the Destination is unmodified.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates the HTTP driver to initialize the local variable for NULL
and check the NULL pointer before dereference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The driver entry point calls gDS->SetMemorySpaceAttributes().
This interface may return EFI_NOT_AVAILABLE_YET when CPU Arch
protocol is not available.
So we need to list CpuArch protocol in its INF dependency section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When coreboot uses different baud rate from the default (115200), the
current BDS driver will not be able to enable serial console display
due to the inconsistent serial port PCD settings. By adding the
PlatformHookLib reference in the inf file, it will enforce the PCDs
to be aligned with what have been passed from coreboot.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Lee Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed by: Lee Leahy <leroy.p.leahy@intel.com>
Current CorebootPayloadPkg uses PciBusNoEnumerationDxe and
PciRootBridgenoEnumerationDxe copied from the DuetPkg. Now it will
switch to use the standard PciBusDxe and PciHostBridgeDxe from
MdeModulePkg. As a result, a coreboot specific PciHostBridgeLib
is added to collect pre-allocated PCI resources.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Not all platforms have or support graphics. The ASSERT that the
frame buffer HOB is not NULL is fatal for these platforms. Convert
this into an if statement and make the related PcdSet* calls c
onditional on locating the frame buffer HOB.
Change-Id: Ibdc4bf5359571f3ce1555efcaf4657b8e363b2cd
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Fix Linux build failure with GCC 4.8.4 due to missing braces.
Change-Id: Ic0de6520605149f1bb74f8b60ce8cab8beda10a4
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
This patch adds two error conditions:
1) if one path in PACKAGES_PATH doesn't exist.
2) if the space exists in the PACKAGES_PATH.
In V2, highlight one path in PACKAGES_PATH env doesn't exist.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed by: Andrew Fish <afish@apple.com>
PciBus driver originally always degrade (64->32) the MMIO resource
for PCI BAR when the PCI device contains option ROM.
But the degrade causes the PCI device can only use resource below 4GB
which makes the resource allocation fails when the PCI device wants
very big MMIO.
The patch follows the PI spec (ECR 1529) to honor the granularity
setting for PCI BAR from IncompatiblePciDeviceSupport so that even
for PCI device which contains option ROM, the degrade doesn't happen
if IncompatiblePciDeviceSupport returns 64 as granularity.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Remove "Efi" from gEfiIncompatiblePciDeviceSupport to shorten
the global variable name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove PCD_MAX_SKU_ID definition,
the check to PCD_MAX_SKU_ID and the comments describes the limitation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove the sentence
"The valid SkuId range is 1 to 255." from SetSku function comments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When ACPI table is installed before PcRtc driver runs,
the ACPI table installation callback isn't called which causes the
century value isn't written to the CMOS.
The patch calls GetCenturyRtcAddress() in entry point to fix
the bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
The patch moves ACPI parsing code to a separate function
GetCenturyRtcAddress() and the next patch will call this
function in driver entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
We updated gIntelFspPkgTokenSpaceGuid to gIntelFsp2PkgTokenSpaceGuid
in IntelFsp2Pkg, but we miss the update in IntelFsp2WrapperPkg.
This patch fixed the issue and made them consistent.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Satya P Yarlagadda <satya.p.yarlagadda@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Ravi P Rangarajan <ravi.p.rangarajan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Since the new BdsDxe driver in MdeModulePkg is used, the old
BdsPlatform library is not used any more and should be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Switch over to use BdxDxe generic driver in MdeModulePkg.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
In order to use the generic BdsDxe in MdeModulePkg, a platform
specific PlatfromBootManagerLib is required. This library will
help update the ConIn, ConOut and ErrOut variables.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
The video console resolution related PCDs are required to be
initialized after switching to use the generic BdsDxe driver
in MdeModulePkg.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Convert TAB to white space for CbSupportDxe driver.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
In Previous PI spec (< PI1.4a) Volume 1, Section 7.4.1, the callback
EFI_PEIM_NOTIFY_ENTRY_POINT is defined. A description for the arguments
are provided but not for the EFI_STATUS return value.
PI1.4a updated EFI_PEIM_NOTIFY_ENTRY_POINT definition to include a new
paragraph with this sentence after the arguments:
"The status code returned from this function is ignored"
This patch is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous PI spec (< PI1.4a) has EFI_RESOURCE_ATTRIBUTE_PERSISTENT and
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE with same value 0x00800000.
To resolve the conflict, PI1.4a updated
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE to 0x00080000, this patch
is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch fixes the ARM build failure introduced by
2be45bfe27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Until now the 'addp' command has been handled in the same way as 'add'.
Just copy the DevicePath starting from the Hard Drive node when 'addp'
is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Hao Wu
Laszlo Ersek
Dandan Bi
Yonghong Zhu
Marvin H?user
Jeff Fan
Jiewen Yao
Fu Siyuan
Ruiyu Ni
Maurice Ma
Leahy, Leroy P
Liming Gao
Star Zeng
Qiu Shumin