Create the Hardware Info library base together with the specifics to
describe PCI Host Bridges.
The Hardware Info library is intended to be used for disclosing
non-discoverable hardware information from the host to the guest in
Ovmf platforms. Core functionality will provide the possibility to
parse information from a generic BLOB into runtime structures. The
library is conceived in a generic way so that further hardware
elements can also be described using it. For such purpose the length
of the BLOB is not restricted but instead regarded as a sequence of
header-info elements that allow the parsing during runtime. The first
type of hardware defined will be PCI host bridges, providing the
possibility to define multiple and specify the resources each of them
can use. This enables the guest firmware to configure PCI resources
properly. Having the size of each individual element favors the reuse
of a single interface to convey descriptions of an arbitrary number
of heterogenous hardware elements. Furthermore, flexible access
mechanisms coupled with the size will grant the possibility of
interpreting them in a single run.
Define the base types of the generic Hardware Info library to parse
heterogeneous data. Also provide the specific changes to support
PCI host bridges as the first hardware type supported by the
library.
Additionally, define the HOST_BRIDGE_INFO structure to describe PCI
host bridges along with the functionality to parse such information
into proper structures used by the PCI driver in a centralized manner
and taking care of versioning.
As an example and motivation, the library will be used to define
multiple PCI host bridges for complex platforms that require it.
The first means of transportation that will be used is going to be
fw-cfg, over which a stream of bytes will be transferred and later
parsed by the hardware info library. Accordingly, the PCI driver
will make use of these host bridges definitions to populate the
list of Root Bridges and proceed with the configuration and discovery
of underlying hardware components.
As mentioned before, the binary data to be parsed by the Hardware
Info library should be organized as a sequence of Header-element
pairs in which the header describes the type and size of the associated
element that comes right after it. As an illustration, to provide
inforation of 3 host bridges the data, conceptually, would look
like this:
Header PCI Host Bridge (type and size) # 1
PCI Host Bridge info # 1
Header PCI Host Bridge (type and size) # 2
PCI Host Bridge info # 2
Header PCI Host Bridge (type and size) # 3
PCI Host Bridge info # 3
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
We can have multiple [LibraryClasses] sections, so we can place
all TPM-related library configuration to a single include file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
It is an typo error that HobList pointer should be stored at
PcdOvmfWorkAreaBase, not PcdSevEsWorkAreaBase.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit ff36b2550f.
Has no effect because GCC_IA32_CC_FLAGS and GCC_X64_CC_FLAGS are unused.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The ebp/rbp register can either be used for the frame pointer or
as general purpose register. With gcc (and clang) this depends
on the -f(no-)omit-frame-pointer switch.
This patch updates tools_def.template to explicitly set the compiler
option and also add a define to allow conditionally compile code.
The new define is used to fix stack switching in TemporaryRamMigration.
The ebp/rbp must not be touched when the compiler can use it as general
purpose register. With version 12 gcc starts actually using the
register, so changing it leads to firmware crashes in some
configurations.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3934
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The feature of SecMeasurementLibTdx is replaced by SecTpmMeasurementLibTdx
(which is in SecurityPkg). So SecMeasurementLibTdx is deleted.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
MeasureHobList and MeasureFvImage once were implemented in
SecMeasurementTdxLib. The intention of this patch-set is to refactor
SecMeasurementTdxLib to be an instance of TpmMeasurementLib. So these
2 functions (MeasureHobList/MeasureFvImage) are moved to
PeilessStartupLib. This is because:
1. RTMR based trusted boot is implemented in Config-B (See below link)
2. PeilessStartupLib is designed for PEI-less boot and it is the right
place to do the measurement for Hoblist and Config-FV.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
Enable RTMR based measurement and measure boot for Td guest.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ken Lu <ken.lu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
TdTcg2Dxe mimics the Security/Tcg/Tcg2Dxe. It does below tasks:
- Set up and install CC_EVENTLOG ACPI table
- Parse the GUIDed HOB (gCcEventEntryHobGuid) and create CC event log
- Measure handoff tables, Boot##### variables etc
- Measure Exit Boot Service failed
- Install CcMeasurement Protocol
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ken Lu <ken.lu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
Add PCDs to records LAML/LASA field in CC EVENTLOG ACPI table.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ken Lu <ken.lu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
TdHobList and Configuration FV are external data provided by Host VMM.
These are not trusted in Td guest. So they should be validated , measured
and extended to Td RTMR registers. In the meantime 2 EFI_CC_EVENT_HOB are
created. These 2 GUIDed HOBs carry the hash value of TdHobList and
Configuration FV. In DXE phase EFI_CC_EVENT can be created based on these
2 GUIDed HOBs.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
SecMeasurementLib is designed to do the measurement in SEC phase. In
current stage there are 2 functions introduced:
- MeasureHobList: Measure the Hoblist passed from the VMM.
- MeasureFvImage: Measure the FV image.
SecMeasurementLibTdx is the TDX version of the library.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ken Lu <ken.lu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Since Cloud Hypervisor doesn't emulate an A20 gate register on I/O port
0x92, it's better to avoid accessing it when the platform is identified
as Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Since Cloud Hypervisor doesn't support the fw_cfg mechanism, it's more
appropriate to rely on QemuFwCfgLibNull implementation of QemuFwCfgLib
since it provides a null implementation that will not issue any PIO
accesses to ports 0x510 and 0x511.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
There are few places in the codebase assuming QemuFwCfg will be present
and supported, which can cause some issues when trying to rely on the
QemuFwCfgLibNull implementation of QemuFwCfgLib.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
The FW_BASE_ADDRESS value provided by OvmfPkgDefines.fdf.inc is
incorrect for the CloudHv target. We know the generated firmware
contains a PVH ELF header, meaning it will be loaded according to the
address provided through this header. And since we know this address
isn't going to change as it's part of CloudHvElfHeader.fdf.inc, we can
hardcode it through a new include file CloudHvDefines.fdf.inc, which
replaces the generic one OvmfPkgDefines.fdf.inc.
With this change, we prevent the firmware from accessing MMIO addresses
from the address range 0xffc00000-0xffffffff since we know the firmware
hasn't been loaded on this address range.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Link in pcie and host bridge bits. Enables support for PCIe in microvm
(qemu-system-x86_64 -M microvm,pcie=on).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3777
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
microvm places the 64bit mmio space at the end of the physical address
space. So mPhysMemAddressWidth must be correct, otherwise the pci host
bridge setup throws an error because it thinks the 64bit mmio window is
not addressable.
On microvm we can simply use standard cpuid to figure the address width
because the host-phys-bits option (-cpu ${name},host-phys-bits=on) is
forced to be enabled. Side note: For 'pc' and 'q35' this is not the
case for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
microvm doesn't support pflash and loads the firmware via -bios,
so we can't use the separate CODE and VARS files. Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
In current TDVF implementation all unaccepted memory passed in Hoblist
are tagged as EFI_RESOURCE_MEMORY_UNACCEPTED. They're all accepted before
they can be accessed. After accepting memory region, the Hob ResourceType
is unchanged (still be EFI_RESOURCE_MEMORY_UNACCEPTED).
TDVF Config-B skip PEI phase and it tries to find a memory region which
is the largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
So we should walk thru the input hoblist and search for the memory region
with the type of EFI_RESOURCE_MEMORY_UNACCEPTED.
Because EFI_RESOURCE_MEMORY_UNACCEPTED has not been officially in PI spec.
So it cannot be defined in MdePkg/Include/Pi/PiHob.h. As a temporary
solution it is defined in Hob.c.
There is a patch-set for lazy-accept very soon. In that patch-set
EFI_RESOURCE_MEMORY_UNACCEPTED will be defined in MdeModulePkg.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
According to GHCI Spec Table 2-1, in TDVMCALL R10 should be cleared
to 0 in input operands, and be checked for the return result.
https://cdrdv2.intel.com/v1/dl/getContent/726790
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The SEV-ES bit of Fn800-001F[EAX] - Bit 3 is used for a host to
determine support for running SEV-ES guests. It should not be checked by
a guest to determine if it is running under SEV-ES. The guest should use
the SEV_STATUS MSR Bit 1 to determine if SEV-ES is enabled. This check
was not part of the original SEV-ES support and was added in
a91b700e38. Removing the check makes this code consistent with the
Linux kernel
Fixes: a91b700e38 ("Ovmf/ResetVector: Simplify and consolidate the SEV features checks")
Signed-off-by: Peter Gonda <pgonda@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
kvm FSB clock is 1GHz, not 100 MHz. Timings are off by factor 10.
Fix all affected build configurations. Not changed: Microvm and
Cloudhw (they have already have the correct value), and Xen (has
no fixed frequency, the PCD is configured at runtime by platform
initialization code).
Fixes: c37cbc030d ("OvmfPkg: Switch timer in build time for OvmfPkg")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In TDX, Application Processor busy-loops on Mailbox for OS to issue
MpProtectedModeWakeupCommandWakeup command to UEFI. As the AP acking to
it, it clears the command member according to ACPI spec 6.4, 5.2.12.19
Multiprocessor Wakeup Structure: "The application processor need clear the
command to Noop(0) as the acknowledgement that the command is received."
However, AsmRelocateApMailBoxLoop wrongly clears WakeupVector. Correctly
clear command instead of WakeupVector.
Without this patch, TD guest kernel fails to boot APs.
Fixes: fae5c1464d ("OvmfPkg: Add TdxDxe driver")
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
The BaseMemEncryptSevLib functionality was updated to rely on the use of
the OVMF/SEV workarea to check for SEV guests. However, this area is only
updated when running the X64 OVMF build, not the hybrid Ia32/X64 build.
Base SEV support is allowed under the Ia32/X64 build, but it now fails
to boot as a result of the change.
Update the ResetVector code to check for SEV features when built for
32-bit mode, not just 64-bit mode (requiring updates to both the Ia32
and Ia32X64 fdf files).
Fixes: f1d1c337e7
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3930
CcProbeLib is designed to check the vm guest type. The OvmfPkg/CcProbeLib
reads the OvmfWorkArea (0x80B000) to get the vm guest type which is
written by each guest (SEV or TDX guest). But in SMM drivers the access
to OvmfWorkArea is illegal. PiSmmCpuDxeSmm.inf is an example. It uses
IoLib which in OvmfPkgX64 BaseIoLibIntrinsicSev.inf is included. The
IoLib probes if the working guest is td guest by calling CcProbe().
So CcProbeLibNull will be included when SMM_REQUIRE is set. Currently
only TDVF uses CcProbe to check the guest type, and TDVF doesn't
support SMM, so this fix has no side-effect.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds an instance of VariableFlashInfoLib to the platform build as
it is a new library class introduced in MdeModulePkg.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
In OvmfPkgX64 we enable 2 different CpuMpPei and CpuDxe drivers. The
difference between the drivers is the MpInitLib or MpInitLibUp. This is
acomplished by adding a MpInitLibDepLib.
In IntelTdxX64 we enable 2 versions of CpuDxe drivers. It is because PEI
is skipped in IntelTdxX64.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
In Td guest CpuDxe driver uses the MpInitLibUp, the other guest type
use the MpInitLib. So we install different Protocols according to
the current working guest type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
Td guest should use MpInitLibUp, other guest use the MpInitLib. So
in SecMain.c different PPI is installed according to the working
guest type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
There are 4 MpInitLibDepLib:
- PeiMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- PeiMpInitLibUpDepLib:
MpInitLib unique-processor dependency
- DxeMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- DxeMpInitLibUpDepLib
MpInitLib unique-processor dependency
The Pei libs depend on the corresponding PPI. The Dxe libs depend on the
corresponding Protocol.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
MpInitLibDepLib is a set of libraries which depend on PPI/Protocol.
This patch defines the related PPI/Protocols in OvmfPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
QemuFwCfg is much more powerful than BhyveFwCtl. Sadly, BhyveFwCtl
decided to use the same IO ports as QemuFwCfg. It's not possible to use
both interfaces simultaneously. So, prefer QemuFwCfg over BhyveFwCtl.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Was dropped by accident.
Fixes: b47575801e ("OvmfPkg: move tcg configuration to dsc and fdf include files")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Try query native display resolution from the host. When successful,
setup PcdVideoHorizontalResolution and PcdVideoVerticalResolution
accordingly and add the video mode to the GOP mode list if needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add new function to initialize the GOP, move over setup code. Handle
initialization first, specifically before calling GopQueryMode(), so
GopQueryMode is never called before GopInitialize() did complete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Call GopQueryMode() in GopSetMode(), use the ModeInfo returned when
setting the mode. This is needed to properly handle modes which are
not on the static mGopResolutions list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Extend VirtioGpuSendCommand() to support commands which return data,
rename the function to VirtioGpuSendCommandWithReply() to indicate that.
Add a new VirtioGpuSendCommand() function which is just a thin wrapper
around VirtioGpuSendCommandWithReply() so existing code continues to
work without changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
ConSplitterDxe will pick the highest available resolution then,
thereby making better use of the available display space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Nicolas Ojeda Leon
Gerd Hoffmann
Min M Xu
Sebastien Boeuf
Peter Gonda
Theo Jehl
Isaku Yamahata
Tom Lendacky
Michael Kubacki
Rebecca Cran
Yu Pu
Corvin Köhne