1.Port reset process may not be proper for some vendor's SS hubs. If the corresponding port shows the reset has been done by C_RESET bit we have to skip the whole reset process for attached devices.
2.Clean C_BH_RESET bit immediately to avoid usb timer entering too many times when 5 tiers hubs are connected.
3.Stop checking URB if there is an error happened.
4.Better error handling for fast hot-plug.
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14889 6f19259b-4bc3-4df7-8a09-765794883524
The r14226 check-in indeed has memory leak in allocated "Child" pointer. UsbBusDriverBindingStop() may dereference this pointer and may bring exception on invalid memory access
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14251 6f19259b-4bc3-4df7-8a09-765794883524
1.enlarge the recovery time from 10ms to 20ms after port reset to make set address request success for better device compatibility.
2.another enhancement is to use RESET_C bit rather than RESET bit to judge if hub reset port operation is done.
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14227 6f19259b-4bc3-4df7-8a09-765794883524
1.Fix the bug in interface parser logic for usb camera device. Reserve device address if the device doesn’t get disconnected.
2.Some usb 1.1 devices require the context evaluation immediately with actual max packet size after detecting the device max packet size.
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14226 6f19259b-4bc3-4df7-8a09-765794883524
1) Fix a bug on missing hub context evaluation operation.
2) If the usb keyboard device configuration has been set successfully, then don’t set configuration again.
Signed-off-by: erictian
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13087 6f19259b-4bc3-4df7-8a09-765794883524
1) XHCI host controller hw always provides more than 5 interrupters.
Now using interrupter 0 to accommodate all received events.
2) XHCI host controller hw always provides 32bytes context size.
Now it dynamically detect context size and construct it.
also solved several issues:
1) Divides 64byte width register access to two 32bit registers access because some XHCI chipsets cannot support a single 64bit access.
2) Remove halt host controller statement in UsbBusDriverBindingStop(). It has been done by host controller’s DriverBindingStop(). And XhciDriverBindingStop() need XHCI host controller is in running state because it need execute DISABLE_SLOT cmd to release h/w resource.
signed-off-by: erictian
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12785 6f19259b-4bc3-4df7-8a09-765794883524
0. Remove the unused private GUID from module source files.
1. Use gEfiCallerIdGuid replace of the private module GUID.
2. Add the public header files to define HII FormSet and PackageList GUID used in every HII driver.
3. Move two EBC protocols for debug purpose from EBC driver to MdeModulePkg Include directory.
Signed-off-by: lgao4
Reviewed-by: ydong10 gdong1 tye jfan12 wli12 rsun3 jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12373 6f19259b-4bc3-4df7-8a09-765794883524
2. update SerialNumber comparing logic to handle possible NULL-terminator in WWID device path
3. fix bug in UsbIo->UsbIoGetSupportedLanguages(): TableSize is size in bytes of LangIDTable instead of number of LangID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11197 6f19259b-4bc3-4df7-8a09-765794883524
Increase the value of USB_GENERAL_DEVICE_REQUEST_TIMEOUT from
50 milliseconds to 100 milliseconds. This provides a work around
for slower USB hubs and devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9330 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
EFI_SIGNATURE_16 -> SIGNATURE_16
EFI_SIGNATURE_32 -> SIGNATURE_32
EFI_SIGNATURE_64 -> SIGNATURE_64
EFI_FIELD_OFFSET -> OFFSET_OF
EFI_MAX_BIT -> MAX_BIT
EFI_MAX_ADDRESS -> MAX_ADDRESS
These macros are not defined in UEFI spec. It makes more sense to use the equivalent macros in Base.h to avoid alias.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7056 6f19259b-4bc3-4df7-8a09-765794883524
Feng Tian
Samer El-Haj-Mahmoud
erictian
ydong10
li-elvin
lgao4
oliviermartin
niruiyu
andrewfish
xdu2
hhtian
rsun3
eric_tian
jljusten
vanjeff
gikidy
qwang12
jji4
qhuang8