The DXE core implementation of PcdDxeNxMemoryProtectionPolicy already
contains an assertion that EfiConventionalMemory and EfiBootServicesData
are subjected to the same policy when it comes to the use of NX
permissions. The reason for this is that we may otherwise end up with
unbounded recursion in the page table code, given that allocating a page
table would then involve a permission attribute change, and this could
result in the need for a block entry to be split, which would trigger
the allocation of a page table recursively.
For the same reason, a shortcut exists in ApplyMemoryProtectionPolicy()
where, instead of setting the memory attributes unconditionally, we
compare the NX policies and avoid touching the page tables if they are
the same for the old and the new memory types. Without this shortcut, we
may end up in a situation where, as the CPU arch protocol DXE driver is
ramping up, the same unbounded recursion is triggered, due to the fact
that the NX policy for EfiConventionalMemory has not been applied yet.
To break this cycle, let's remap all EfiConventionalMemory regions
according to the NX policy for EfiBootServicesData before exposing the
CPU arch protocol to the DXE core and other drivers. This ensures that
creating EfiBootServicesData allocations does not result in memory
attribute changes, and therefore no recursion.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Expose the protocol introduced in v2.10 that permits the caller to
manage mapping permissions in the page tables.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The ARM_PROCESSOR_TABLE pseudo-ACPI table (which carries a ACPI-table
like header but is published as a EFI config table) is not described in
any relevant spec, and is not known to be relied upon by any OS. Let's
just get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
gEfiDebugSupportPeriodicCallbackProtocolGuid and
PcdCpuDxeProduceDebugSupport are referred to from CpuDxe.
Delete references from .inf and .h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Virtual uncached pages are simply pages that are aliased using mismatched
attributes, which is not allowed by the ARM architecture. So remove the
protocol and its implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Use the new ARM/AArch64 implementation of the base
CpuExceptionHandlerLib library from CpuDxe to centralize
exception handling.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Since we do not support anything below ARMv7, let's promote the ARMv6
exception handling code in CpuDxe to the only version we provide for
ARM. This means we can drop the unused ARMv4 version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19273 6f19259b-4bc3-4df7-8a09-765794883524
Some non-GCC toolchain might support the GNU assembly language.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15504 6f19259b-4bc3-4df7-8a09-765794883524
Changed ARM CPU SetMemoryAttributes to always use strongly ordered for the EFI_MEMORY_UC attribute.
Signed-off-by:
Reviewed-by: eugenecohen
Reviewed-by: yanivtal
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13011 6f19259b-4bc3-4df7-8a09-765794883524
This gIdleLoopEventGuid event signals the Cpu that it should go into
the idle state waiting for any events.
CpuSleep() is used in this implementation to make the Cpu wait for
the next interrupt (WFI instruction).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11863 6f19259b-4bc3-4df7-8a09-765794883524
Previously the CPU driver had a dependency on the GIC driver.
But by design is should be the opposite. The CPU driver installs the
CPU protocol that exposes the exception registration function.
And then, the interrupt controller registers its IRQ handler through
this interface.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11860 6f19259b-4bc3-4df7-8a09-765794883524
The Exception Vector can be set before installing the CPU DXE driver to add
debugger support at the early stage of the firmware initialization.
If no one has touched the exception vector prior to the CPU DXE then the Vector
might contain non zero data.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11733 6f19259b-4bc3-4df7-8a09-765794883524
ArmPkg - Supoprt for ARM specific things that can change as the architecture changes. Plus semihosting JTAG drivers.
EmbeddedPkg - Generic support for an embeddded platform. Including a light weight command line shell.
BeagleBoardPkg - Platform specifics for BeagleBoard. SD Card works, but USB has issues. Looks like a bug in the open source USB stack (Our internal stack works fine).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9518 6f19259b-4bc3-4df7-8a09-765794883524