REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1337
In function GetSectionFromAnyFvByFileType, the input parameter "Buffer"
and "size" should not be NULL, so add ASSERT here to avoid any checker
report that the NULL pointer may be used.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1336
In function DevPathToTextUsbWWID, the Length parameter is used
without check. This patch is to add check before using it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BaseIoLibIntrinsicArmVirt was created to prevent LTO from merging
accesses to MMIO regions, resulting in instructions with multiple
output registers that KVM on ARM cannot emulate (since the exception
syndrome information that KVM relies on can only describe a single
output register)
However, using double word loads on ARM amounts to the same thing,
and so code that relies on doing 64-bit MMIO to regions that are
emulated under KVM (such as the GICv3 TYPER register) will still
suffer from the original issue.
So replace ldrd and strd with equivalent two instruction sequences.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=1317
This is a regression issue caused by 2ec7953d49.
In Decode() function, once mOutBuf is fully filled, Decode() should return.
Current logic misses the checker of mOutBuf after while() loop.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1312
Text format for AcpiEx device path in UEFI Spec:
AcpiEx(HID,CID,UID,HIDSTR,CIDSTR,UIDSTR)
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR))(Display Only)
When convert device path to text for AcpiEx device path,
current code check AllowShortcuts parameter to convert
the device path to DisplayOnly text format(shorter text
representation) by mistake.
It should check DisplayOnly parameter.
This commit is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1303
Today's code generates assembly code as below for
InternalSyncIncrement:
__asm__ __volatile__ (
"movl $1, %%eax \n\t"
"lock \n\t"
"xadd %%eax, %1 \n\t"
"inc %%eax \n\t"
: "=a" (Result), // %0
"+m" (*Value) // %1
: // no inputs that aren't also outputs
: "memory",
"cc"
);
0: 55 pushl %ebp
1: 89 e5 movl %esp, %ebp
3: 8b 45 08 movl 8(%ebp), %eax
6: b8 01 00 00 00 movl $1, %eax
b: f0 lock
c: 0f c1 00 xaddl %eax, _InternalSyncIncrement(%eax)
f: 40 incl %eax
10: 5d popl %ebp
11: c3 retl
Line #3 and Line #6 both use EAX as destination register.
Line #c uses EAX and (EAX).
The output operand "=a" tells GCC that EAX is used for output.
But GCC only assumes that EAX will be used in the very last
instruction.
Per GCC document,
"Use the '&' constraint modifier on all output operands that must
not overlap an input. Otherwise, GCC may allocate the output
operand in the same register as an unrelated input operand, on
the assumption that the assembler code consumes its inputs before
producing outputs. This assumption may be false if the assembler
code actually consists of more than one instruction."
"=&a" should be used to tell GCC not use EAX before the assembly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 8a94eb9283
Fixes: 17634d026f
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
AcpiExp text device path: AcpiExp(HID,CID,UIDSTR)
And according to UEFI spec, the CID parameter is optional
and has a default value of 0. But current implementation
miss to check following cases for the AcpiExp.
FromText:when text device is AcpiExp(HID,,UIDSTR)/AcpiExp(HID,0,UIDSTR)
ToText: when the CID is 0 in the node structure
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
According to UEFI spec,
for the Messaging Device Path with USB Class SubType, some paras
are optional in the text device path.
Take UsbClass(VID,PID,Class,SubClass,Protocol) for example,
The VID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The PID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The Class is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The SubClass is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The Protocol is an integer between 0 and 255 and is optional. The
default value is 0xFF.
So if any the optional para is not specified in the text device,
we should set related para in the node structure to default value.
This commit is to do the enhancement for USB Class device path
when optional para is not specified
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
Sata device path format:Sata(HPN, PMPN, LUN)
According to UEFI Spec, the PMPN is an integer between
0 and 65535 and is optional. If not provided, the default is 0xFFFF.
This commit is to do the enhancement for Sata device path
when optional para is not specified.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace multiple, consecutive "\" characters prior to other processing
involving "\" characters. This fixes an issue where "\\..\\..",
"//..//..", and similar input paths are not cleaned properly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1262
Current implementation of BaseLib APIs:
AsciiStrToUnicodeStr()
AsciiStrToUnicodeStrS()
AsciiStrnToUnicodeStrS()
do not handle EASCII properly.
More specifically, if the value of ASCII character is larger than 0x7F,
then the converted Unicode character will have all '1's in the higher 8
bits.
An example:
0xC9 => 0xFFC9 (current implementations)
and it should be:
0xC9 => 0x00C9
This commit will address this issue.
Cc: Bin.Lain <bin_601@mail2000.com.tw>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1266af5e952159 abstracted generic functions
from different modules (IntelVTdDxe, S3SaveStateDxe, PcRtc,
DpDynamicCommand and PiSmmCpuDxeSmm). Some of them (IntelVTdDxe and
PcRtc) checked Table against NULL before accessing Table->Signature,
some (S3SaveStateDxe, DpDynamicCommand and PiSmmCpuDxeSmm did not.
The ScanTableInSDT() in Acpi.c of UefiLib was mainly from
S3SaveStateDxe, so it does not check Table against NULL before
accessing Table->Signature.
This patch updates ScanTableInSDT() to check Table against NULL first
before accessing Table->Signature.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The IA32 variant of InternalSyncCompareExchange64() is correct, but we can
simplify it. We don't need to load the lower 32 bits of ExchangeValue into
EBX in two steps (first into a general register, then into EBX); we can
ask GCC to populate EBX like that itself.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the X64 half of the last one, except for the
InternalSyncCompareExchange32() -> InternalSyncCompareExchange64() and
"cmpxchgl" -> "cmpxchgq" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The X64 version of InternalSyncCompareExchange64() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the last one, except for the
InternalSyncCompareExchange16() -> InternalSyncCompareExchange32() and
"cmpxchgw" -> "cmpxchgl" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange32() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange32() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange16() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange16() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The "GccInline.c" files have some inconsistent whitespace, and missing (or
incorrect) operand comments. Fix and unify them.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1229
When converting DebugPort device path from text,
current code use VENDOR_DEFINED_MESSAGING_DEVICE_PATH structure
for Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
UINT8 VendorDefinedData[1];
} VENDOR_DEFINED_MESSAGING_DEVICE_PATH;
And Debugport Device Path is a vendor-defined messaging
device path with no data, only a GUID. So it's better to
use VENDOR_DEVICE_PATH to create the Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
} VENDOR_DEVICE_PATH;
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
MdePkg-BaseLib: Fix PathCleanUpDirectories() error involving "\..\.."
The loop that removes "xxxx\..\" errs when multiple "\.." sequences are
in the path. Before this change the code would modify a path like
"FS0:\efi\tools\..\.." to "FS0:\efi\\.." and then to "FS0:\efi\", but
the correct path is "FS0:\".
You can test the effect of this change in the shell by setting the
current directory to something like FS0:\efi\boot and then executing
the command "ls ..\..". Before the change you will see the files in
the FS0:\efi directory; after the change, you will see the files in
the root directory of FS0:.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1228
According to UEFI spec,for ACPI Expanded Device Path
when HID=PNP0A03 or CID=PNP0A03 and HID != PNP0A08,
the device path node can be displayed as: PciRoot(UID|UIDSTR)
When HID=PNP0A08 or CID=PNP0A08, the device path node can be
displayed as: PcieRoot(UID|UIDSTR). But current code miss the
code logic.
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1226
According to UEFI Spec, for ACPI Expanded Device Path,
when HIDSTR=empty, CIDSTR=empty, UID STR!=empty,
the ACPI Expanded Device Path node can be displayed as
AcpiExp(HID,CID,UIDSTR) format.
And if UID is 0 and UIDSTR is empty, then use AcpiEx format.
This patch is to correct the condition check to follow UEFI
Spec when convert the device path node to the AcpiExp text
format.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1227
According to UEFI Spec, ACPI Expanded Device Path can be display
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR)), but current code display
UID|UIDSTR before CID|CIDSTR.
This patch is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1225
According to UEFI spec, the string expression of UTF8 vendor
device node should be displayed as: VenUtf8(). Current code
display it as: VenUft8() by mistake when convert device
path node to text.
This commit is to fix this bug.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1193
This commit will add a new BaseLib API AsmLfence(). This API will perform
a serializing operation on all load-from-memory instructions that were
issued prior to the call of this function. Please note that this API is
only available on IA-32 and x64.
The purpose of adding this API is to mitigate of the [CVE-2017-5753]
Bounds Check Bypass issue when untrusted data are being processed within
SMM. More details can be referred at the 'Bounds check bypass mitigation'
section at the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The PCD below is unused, so it has been removed from inf.
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch adds new EfiLocateXXXAcpiTable() APIs in UefiLib
for the request and also the following patch to remove the
duplicated code.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, "gcc-4.8.5-28.el7_5.1.x86_64" generates the following code for
me, from the XADD inline assembly added to "X64/GccInline.c" in commit
17634d026f96:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 00 lock xadd %eax,(%rax)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : "m" (*Value) // %2
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
>
The MOV $0X1,%EAX instruction corrupts the address of Value in %RAX before
we reach the XADD instruction. In fact, it makes no sense for XADD to use
%EAX as source operand and (%RAX) as destination operand at the same time.
The XADD instruction's destination operand is a read-write operand. The
GCC documentation states:
> The ordinary output operands must be write-only; GCC will assume that
> the values in these operands before the instruction are dead and need
> not be generated. Extended asm supports input-output or read-write
> operands. Use the constraint character `+' to indicate such an operand
> and list it with the output operands. You should only use read-write
> operands when the constraints for the operand (or the operand in which
> only some of the bits are to be changed) allow a register.
(The above is intentionally quoted from the oldest GCC release that edk2
supports, namely gcc-4.4:
<https://gcc.gnu.org/onlinedocs/gcc-4.4.7/gcc/Extended-Asm.html>.)
Fix the operand list accordingly.
With the patch applied, I get:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 02 lock xadd %eax,(%rdx)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : // no inputs that aren't also outputs
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
Note that some other bugs remain in
"BaseSynchronizationLib/*/GccInline.c"; those should be addressed later,
under <https://bugzilla.tianocore.org/show_bug.cgi?id=1208>.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1207
Fixes: 17634d026f
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1197
Today's InterlockedIncrement()/InterlockedDecrement() guarantees to
perform atomic increment/decrement but doesn't guarantee the return
value equals to the new value.
The patch fixes the behavior to use "XADD" instruction to guarantee
the return value equals to the new value.
The patch calls intrinsic functions for MSVC tool chain, calls the
NASM implementation for INTEL tool chain and calls GCC inline
assembly implementation (GccInline.c) for GCC tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
PiDxe.h is not used PciSegmentLib.h.
So <PiDxe.h> is deleted.
https://bugzilla.tianocore.org/show_bug.cgi?id=1184
v2:Update the bugzilla link.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PiDxe.h is not used PciSegmentLib.h.
So "#include <PiDxe.h>" is deleted.
https://bugzilla.tianocore.org/show_bug.cgi?id=1183
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Now that Itanium support has been dropped, we can remove the various
occurrences of the ELILO on Itanium PE/COFF header workaround.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=816
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While reviewing the patch that would land as 768b611136
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.
Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EfiOpenFileByDevicePath() function centralizes functionality from
- MdeModulePkg/Universal/Disk/RamDiskDxe
- NetworkPkg/TlsAuthConfigDxe
- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe
- ShellPkg/Library/UefiShellLib
unifying the implementation and fixing various bugs.
(Ray suggested that we eliminate the special handling of
EFI_FILE_MODE_CREATE in the "OpenMode" input parameter as well. We plan to
implement that separately, under
<https://bugzilla.tianocore.org/show_bug.cgi?id=1074>.)
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit adds an addtional check in AsciiStriCmp. It
explicitly checks the end of the sting pointed by 'SecondString' to make
the code logic easier for reading and to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <Hao.a.wu@intel.com>
Within function SmmMemLibInternalGetUefiMemoryAttributesTable(), add a
check to avoid possible null pointer dereference.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
It treats the UEFI runtime page with EFI_MEMORY_RO attribute as
invalid SMM communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats GCD untested memory as invalid SMM
communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Hopefully this should tidy the conversion warnings.
----
Add 32-bit and 64-bit functions that count number of set bits in a bitfield
using a divide-and-count method.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Tomas Pilar <tpilar@solarflare.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Commit d2aafe1e41 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
KVM on ARM refuses to decode load/store instructions used to perform
I/O to emulated devices, and instead relies on the exception syndrome
information to describe the operand register, access size, etc.
This is only possible for instructions that have a single input/output
register (as opposed to ones that increment the offset register, or
load/store pair instructions, etc). Otherwise, QEMU crashes with the
following error
error: kvm run failed Function not implemented
R00=01010101 R01=00000008 R02=00000048 R03=08000820
R04=00000120 R05=7faaa0e0 R06=7faaa0dc R07=7faaa0e8
R08=7faaa0ec R09=7faaa088 R10=000000ff R11=00000080
R12=ff000000 R13=7fccfe08 R14=7faa835f R15=7faa887c
PSR=800001f3 N--- T svc32
QEMU: Terminated
and KVM produces a warning such as the following in the kernel log
kvm [17646]: load/store instruction decoding not implemented
The IoLib implementation provided by MdePkg/Library/BaseIoLibIntrinsic
is based on C code, and when LTO is in effect, the MMIO accesses could
be merged with, e.g., manipulations of the loop counter, producing
opcodes that KVM does not support for emulated MMIO.
So let's add a special ArmVirt flavor of this library that implements
that actual load/store operations in assembler, ensuring that the
instructions involved can be emulated by KVM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Free HandleBuffer for error path in EfiLocateProtocolBuffer().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
When UefiRuntimeLib links to a DXE driver, its constructor
still registers a Virtual Address Change event. The event callback
will get called when RT.SetVirtualAddressMap() is called from OS.
But when the driver is a DXE driver, the memory occupied by the
callback function might be zeroed or used by OS since the BS type
memory is free memory when entering to RT phase.
The patch reverts commit 97511979b4
"MdePkg/UefiRuntimeLib: Support more module types."
It makes sure that DXE driver cannot link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add a routine to DxeServicesLib that abstracts the allocation of memory
that should be accessible by PEI after resuming from S3. We will use it
to replace open coded implementations that limit the address to < 4 GB,
which may not be possible on non-Intel systems that have no 32-bit
addressable memory at all.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PeriodicSmiDispatchFunction() in SmmPeriodicSmiLib may assert
with "Bad CR signature".
Currently, the SetActivePeriodicSmiLibraryHandler() function
(invoked at the beginning of the PeriodicSmiDispatchFunction()
function) attempts to locate the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT
structure pointer for the current periodic SMI from a given
EFI_SMM_PERIODIC_TIMER_REGISTER_CONTEXT (RegiserContext) structure
pointer (using the CR macro).
The RegisterContext structure pointer passed to the
PeriodicSmiDispatchFunction() is assumed to point to the same
RegisterContext structure address given to the
SmmPeriodicTimerDispatch2 protocol Register() API in
PeriodicSmiEnable().
However, certain SmmPeriodicTimerDispatch2 implementation may copy
the RegisterContext to a local buffer and pass that address as the
context to PeriodicSmiDispatchFunction() in which case usage of the
CR macro to find the parent structure base fails.
The patch uses the LookupPeriodicSmiLibraryHandler() function to
find the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT structure pointer.
This works even in this scenario since the DispatchHandle returned
from the SmmPeriodicTimerDispatch2 Register() function uniquely
identifies that registration.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi
Ard Biesheuvel
Liming Gao
Ruiyu Ni
Jim.Dailey@dell.com
Hao Wu
Star Zeng
Laszlo Ersek
shenglei
Chen A Chen
Jiewen Yao
Tomas Pilar (tpilar)