mGicNumInterrupts is the total number of interrupts, so the interrupt
ID equal to mGicNumInterrupts is also invalid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
On ARM, manipulating live page tables is cumbersome since the architecture
mandates the use of break-before-make, i.e., replacing a block entry with
a table entry requires an intermediate step via an invalid entry, or TLB
conflicts may occur.
Since it is not generally feasible to decide in the page table manipulation
routines whether such an invalid entry will result in those routines
themselves to become unavailable, use a function that is callable with
the MMU off (i.e., a leaf function that does not access the stack) to
perform the change of a block entry into a table entry.
Note that the opposite should never occur, i.e., table entries are never
coalesced into block entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Now XN attribute will be set automatically if the region is declared
as device memory. However, the function ArmMemoryAttributeToPageAttribute
is to get attribute for block and page descriptors, not for table
descriptors, so attribute TT_TABLE_*XN does not really take effect.
Need to use TT_*XN_MASK instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some minor typographical problems were noticed during previous commits.
This change corrects those, and contains no functional modifications.
The changes are in comments, and one diagnostic message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The TimerFreq variable in the TimerConstructor() is unused in RELEASE
builds since ASSERTs are then disabled.
The only use of the variable (in the ASSERT) is replaced by a direct
invocation of the function previously used to set it.
NOTE: The build tools suppress warnings of this using compiler options
eg. -Wno-unused-but-set-variable for GCC toolchain or
--diag_suppress=550 for RVCT toolchain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
FirmwarePerformanceDxe.c utilizes the Timer Library function
GetTimeInNanoSecond() which was not implemented by the ArmArchTimerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This refactors some timer code to define MultU64xN as a preprocessor
symbol rather than a function pointer, and to factor out the code that
obtains the timer frequency into GetPlatformTimerFreq ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
[ard.biesheuvel: split off from 'add GetTimeInNanoSecond() to ArmArchTimerLib']
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The function ArmClearMemoryRegionReadOnly() was supposed to undo the
effect of ArmSetMemoryRegionReadOnly(), but instead, it sets the permissions
to EL0-no access, EL1-read-only. Since the EL0 bit should be 1 to align
with EL2/3 (where the bit is SBO), use TT_AP_RW_RW instead, which makes the
entry read-write for EL0 when executing at EL1, and read-write for all other
levels.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This replaces the somewhat opaque preprocessor based stack/unstack macros
with open coded ldp/stp sequences to preserve the interrupted context
before handing over to the exception handler in C.
This removes various arithmetic operations on the stack pointer, and
reduces the exception return critical section to its minimum size (i.e.,
the bare minimum required to populate the ELR and SPSR registers and invoke
the eret).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
If we are using the vector table in place, there is no need to make an
indirect call to the common handler routine from the vector table entries,
so just use a straight branch instruction in that case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
The global gArmRelocateVectorTable is a build time constant, but due to
its external linkage and lack of constness, the compiler does not see that.
So turn it into a static boolean, and at the same time, make the function
CopyExceptionHandlers() (which is only called if gArmRelocateVectorTable is
set) static as well, so that the compiler can eliminate it completely if
we are using the vector table in place.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
ESR and FAR are populated by the hardware upon exception entry, and
describe the exception, not the interrupted context. So there is no point
in restoring their values before returning from the exception.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
We have three code paths to stack/unstack the exception context, one for
each of EL3, EL2 and EL1. However, they all access the same copy of FPSR
so move that access to the common path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Unlike the AArch32 vector table, which has room for a single instruction
for each exception type, the AArch64 exception table has 128 byte slots,
which can easily hold the shared prologues that are emitted out of line.
So refactor this code into a single macro, and expand it into each vector
table slot. Since the address of the command handler entry point is no
longer patched in by the C code, we can just emit the literal into each
vector entry directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
The macros EL1_OR_EL2() and EL1_OR_EL2_OR_EL3() allow conditional execution
of assembly sequences based on the current exception level, by jumping to
caller supplied labels 1f, 2f or 3f. However, the jump to 1f is actually
a fallthrough, which means the EL1 code needs to follow right after the
macro invocation, and the 1f label is ignored.
So let's fix this by making all jumps explicit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Use the new ARM/AArch64 implementation of the base
CpuExceptionHandlerLib library from CpuDxe to centralize
exception handling.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce ARM and AArch64 instances of the CpuExceptionHandlerLib which
provides exception handling and registration of handlers regardless of
execution phase.
Two variants of the ArmExceptionLib are provided: one where exception
handlers reside within the module (meeting appropriate architectural
alignment requirements for the vector table) and another one that will
relocate a copy of thee xception handlers to an address specified by
PcdCpuVectorBaseAddress. The ArmRelocateExceptionLib is intended for use
in cases where ArmExceptionLib is too large for the application
(uncompressed XIP images) as driven by the vector table alignment padding.
The AArch64 build of this library supports execution at EL1, EL2, and EL3
exception levels.
Tested on ARM, and AArch64 with SEC, DXE Core, and CpuDxe modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add ArmReadHcr() to ArmLib to enable read-modify-write of the HCR system
register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Architecturally, the TTBCR register value is undefined at reset for
Non-Secure.
On some platforms the reset value for TTBCR is not zero and
this causes a data abort exception once the MMU is enabled.
This patch configures the TTBCR register to enable translation table
walk using TTBR0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Update the CpuDxe driver to remove an assumption that it is the only
component modifying interrupt state since this can be done through BaseLib
as well. Instead of using a global variable for last interrupt state we
now check the current PSTATE value directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The AArch64 DAIF bits are different for reading (mrs) versus writing
(msr). The bitmask definitions assumed they were the same causing
incorrect results when trying to determine the current interrupt
state through ArmGetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Modify the DefaultExceptionHandler (uefi-variant) so it can be used by
DxeCore (via CpuExceptionHandlerLib) where the debug info table is not
yet published at library constructor time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some updates to SCR can cause a problem which manifests as an undefined opcode exception.
This may be when a speculative secure instruction fetch happens after the NS bit is set.
An isb is required to make the register change take effect fully.
Contributed-under: Tianocore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <Evan.Lloyd@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19778 6f19259b-4bc3-4df7-8a09-765794883524
The RVCT compiler may emit calls to the various __aeabi_c?cmp??
functions, which return their results via the CPU condition flags
C and Z. According to ARM doc IHI 0043D 'Run-time ABI for the ARM
architecture':
The 3-way comparison functions c*cmple, c*cmpeq and c*rcmple return
their results in the CPSR Z and C flags. C is clear only if the operands
are ordered and the first operand is less than the second. Z is set only
when the operands are ordered and equal.
Add implementations for the double and float variants of the above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19327 6f19259b-4bc3-4df7-8a09-765794883524
Unfortunately, Clang does not support the use of symbol references in .org
directives, and bails with the following error message when it encounters
them:
<...>:error: expected assembly-time absolute expression
.org DebugAgentVectorTable + 0x000
So replace the .org arguments with absolute values, and move the whole
vector table into a subsection with the appropriate alignment, and
starting at .org 0x0. This gives the same protection with respect to
entries that exceed 128 bytes, in a way that Clang supports as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19303 6f19259b-4bc3-4df7-8a09-765794883524
Commit SVN r18778 made all mappings of normal memory (inner) shareable,
even on hardware that implements shareability as uncached accesses.
The original concerns that prompted the change, regarding coherent DMA
and virt guests migrating between CPUs, do not apply to such hardware,
so revert to the original behavior in that case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19285 6f19259b-4bc3-4df7-8a09-765794883524
The -fno-tree-vrp option is not required for GCC 4.8 or later, and is not
supported by CLANG. So restrict its use to GCC 4.6 and 4.7, which are the
oldest versions we support for ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19283 6f19259b-4bc3-4df7-8a09-765794883524
The open coded access to co-processor #10 to set FPEXC is not supported
by the CLANG assembler, but the architecturally correct VMSR instruction
is not supported by older binutils. So keep the former unless __clang__
is defined.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19282 6f19259b-4bc3-4df7-8a09-765794883524
CLANG for ARM may emit calls to __aeabi_memset(), which is subtly different
from the default memset() [arguments 2 and 3 are reversed]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19281 6f19259b-4bc3-4df7-8a09-765794883524
The CLANG assembler does not support the legacy, non-unified assembler syntax,
i.e., it does not support the reordering of the condition suffixes with the
increment/decrement before/after or byte/word suffixes, and it does not
recognize the 'empty descending' (ED) suffix at all. So move to the unified
syntax, and replace 'empty descending' with 'decrement after' or 'increment
before' as appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19280 6f19259b-4bc3-4df7-8a09-765794883524
In the function ArmGicEnableDistributor (), the Affinity Routing Enable
(ARE) bit, which essentially defines whether the GIC runs in v2 or v3
mode, is inadvertently cleared when enabling the GIC distributor if it
is running in v3 mode. So fix that.
Reported-by: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19274 6f19259b-4bc3-4df7-8a09-765794883524
Since we do not support anything below ARMv7, let's promote the ARMv6
exception handling code in CpuDxe to the only version we provide for
ARM. This means we can drop the unused ARMv4 version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19273 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the ArmPkg variant of InvalidateInstructionCacheRange to
flush the data cache only to the point of unification (PoU). This improves
performance and also allows invalidation in scenarios where it would be
inappropriate to flush to the point of coherency (like when executing code
from L2 configured as cache-as-ram).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Added AARCH64 and ARM/GCC implementations of the above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19174 6f19259b-4bc3-4df7-8a09-765794883524
This has the effect of splitting assembly functions into their own sections
so the linker can remove unused ones to save space.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19109 6f19259b-4bc3-4df7-8a09-765794883524
In response to Leif's request earlier, this adds a new RVCT assembler
macro to centralize the exporting of assembly functions including the
EXPORT directive (so the linker can see it), the AREA directive (so
it's in its own section for code size reasons) and the function label
itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19098 6f19259b-4bc3-4df7-8a09-765794883524
In SVN 18756 ("disallow whole D-cache maintenance operations")
InvalidateInstructionCache was modified to remove the full data cache
clean but left the full instruction cache invalidate. The change was
made to address issues in the set/way clean methodology but the
resulting code could lead someone to a painful debug. If a component
called this function, the proper code would not be flushed to the PoU,
since the intent of this function is not only to invalidate the I-cache
but to provide coherency after code loading / modification. This change
simply places an ASSERT(FALSE) in this function to avoid this hazard.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19084 6f19259b-4bc3-4df7-8a09-765794883524
The ARM softfloat library in ArmSoftfloatLib currently does not build
under RVCT, simply because the code includes system header files that
RVCT does not provide. However, nothing exported by those include files
is actually used by the library when built in SOFTFLOAT_FOR_GCC mode,
so we can just drop all of them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19031 6f19259b-4bc3-4df7-8a09-765794883524
In order to support software floating point in the context of
DXE drivers etc, this factors out the core ARM softfloat support
into a separate library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19030 6f19259b-4bc3-4df7-8a09-765794883524
The SetPrimaryStack and InitializePrimaryStack macros are no longer
used now that we removed support for ArmPlatformGlobalVariableLib.
So remove the various versions of them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19004 6f19259b-4bc3-4df7-8a09-765794883524
The BdsLib implementation under ArmPkg never references
gArmGlobalVariableGuid so it should not list it as a dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18997 6f19259b-4bc3-4df7-8a09-765794883524
ArmPkg does not depend on ArmPlatformGlobalVariableLib, and this library
is about to be removed, so remove all mention of it from ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18983 6f19259b-4bc3-4df7-8a09-765794883524
As of SVN 15115, the PEI core needs a MigratePeiServicesTablePointer function.
Background: The ArmPkg variant of the PeiServicesTablePointerLib implements
the standard PEI Services table retrieval mechanism as defined in the
PI Specification Volume 1 section 5.4.4 using the TPIDRURW registers.
No special action is required on ARM to migrate the PEI Services table
pointer after main memory initialization but a function must be implemented
nonetheless.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18953 6f19259b-4bc3-4df7-8a09-765794883524
RVCT (the proprietary 32-bit ARM compiler) warns about Node potentially being
used uninitialized, so initialize it to NULL explicitly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18952 6f19259b-4bc3-4df7-8a09-765794883524
The way the v7 MMU code is invoked by the Xen port is somewhat of
a pathological case, since it describes its physical memory space
using a single cacheable region that covers the entire addressable
range. When clipping this region to the part that is 1:1 addressable,
we end up with a region of exactly 4 GB in size, which just exceeds
the range of the UINT32 variable we use in FillTranslationTable() to
track our progress while populating the page tables. So promote it
to UINT64 instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18930 6f19259b-4bc3-4df7-8a09-765794883524
Heyi Guo
Ard Biesheuvel
Evan Lloyd
Sami Mujawar
Leendert van Doorn
Cohen, Eugene
Ryan Harkin
Jordan Justen