According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, we always invalidate the TLBs entirely after making
any modification to the page tables. Now that we have introduced
strict memory permissions in quite a number of places, such
modifications occur much more often, and it is better for performance
to flush only those TLB entries that are actually affected by
the changes.
At the same time, relax some system wide data synchronization barriers
to non-shared. When running in UEFI, we don't share virtual address
translations with other masters, unless we are running under virt, but
in that case, the host will upgrade them as appropriate (by setting
an override at EL2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmPkg/Include/IndustryStandard/ArmTrustZoneSmc.h contains definitions
contradicting the SMC Calling Convention (ARM DEN0028B).
It also has no users in public trees. So delete before it can cause
damage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 31f5388006 ("ArmPkg/DefaultExceptionHandlerLib: use console
if available") added calls to AsciiPrint() to the default exception
handler code, but the ARM version did not include UefiLib.h yet
(even though the .INF declares it unconditionally), resulting in
build breakage. So add the missing include.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Print the minimal 'exception occurred' message to the console as well
as to the serial port if the console is available. This makes such
messages visible on systems where the console is graphical and the
serial is not connected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Drop the redundant BASE variant, which is no longer used anywhere
now that DebugAgentSymbolsBaseLib no longer incorporates a vector
table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Declare that this library is only usable in the context of DXE core
or a DXE driver. Set the MODULE_TYPE to BASE: this only affects the
prototype of the constructor (if present) but doesn't actually
restrict the usage context otherwise.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DebugAgentSymbolsBaseLib is an optional library that is in charge
of extracting debug headers from SEC and PEI_CORE images in memory
so the filename and the offset in memory can be reported via the
UART, allowing a developer to load debugging symbols into his
debugger.
Interestingly enough, DebugAgentSymbolsBaseLib is also in charge of
exception handling before this duty is taken over by either the PEI
core, or the CPU DXE driver when running under PrePi.
Since exceptions are not actually handled at all on AArch64, and simply
routed to the DefaultExceptionHandlerLib (for which a special version
has been created to be usable this early), let's get rid of this
dubious functionality altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take care not to dereference BlockEntry if it may be pointing past
the end of the page table we are manipulating. It is only a read,
and thus harmless, but HeapGuard triggers on it so let's fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
Commit 829633e3a8 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We've removed BaseTools support for GCC44..GCC47. Drop
ArmPkg/ArmSoftFloatLib build flags that are specific to any of those gcc
versions. (See also commit 01627dba09, "ArmPkg/ArmSoftfloatLib: restrict
-fno-tree-vrp option to GCC46 and GCC47", 2015-12-15).
No GCC44..GCC47 references remain under ArmPkg after this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the SBSA specification the Watchdog Compare
Register is split into two separate 32bit registers.
EDK2 code uses a single 64bit transaction to update
them, which can be problematic, depending on the SoC
implementation and could result in unpredictable behavior.
Fix this by modifying WatchdogWriteCompareRegister routine to
use two consecutive 32bit writes to the Watchdog Compare Register
Low and High, using new dedicated macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Dynamically allocate the buffer to receive the SCMI protocol list.
This makes MAX_PROTOCOLS redundant, so it is removed.
It also fixes one minor code alignment issue and removes an unused
macro PROTOCOL_MASK.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change fixes a bug in the SCMI DXE which is observed with the
upcoming release of the SCP firmware.
The PROTOCOL_ID_MASK (0xF) which is used to generate an index in
the ProtocolInitFxns is wrong because protocol ids can be
anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates
the same index for two different protocols e.g. for protocol ids
0x10 and 0x90, which causes duplicate initialization of a protocol
resulting in a failure.
This change removes the use of PROTOCOL_ID_MASK and instead
uses a list of protocol ids and their initialization functions
to identify a supported protocol and initialize it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This was the warning (shown for __aeabi_memcpy, __aeabi_memcpy4 and
__aeabi_memcpy8):
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:42:6:
error: '__aeabi_memcpy8' alias between functions of incompatible types
'void(void*, const void *, size_t)'
{aka 'void(void *, const void *, unsigned int)'}
and 'void *(void *, const void *, size_t)'
{aka 'void *(void *, const void *, unsigned int)'} [-Werror=attribute-alias]
void __aeabi_memcpy8(void *dest, const void *src, size_t n);
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:19:7: note: aliased declaration here
void *__memcpy(void *dest, const void *src, size_t n)
The problem is the different return type (void vs void*). So reshuffle
the code so the prototypes match between the aliases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
[ardb: change prototype of internal __memcpy() and drop extra wrapper]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
GCC8 reported it with the following warning:
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c: In function 'DisassembleArmInstruction':
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c:397:30: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((OpCode & 0x0db00000) == 0x03200000) {
This condition tries to be true for both the immediate and the register
version of the MSR instruction. They get identified inside the if-block
using the variable I, which contains the value of bit 25.
The problem with the comparison reported by GCC is that the
bitmask excludes bit 25, while the value requires it to be set to one:
0x0db00000: 0000 11011 0 11 00 00 0000 000000000000
0x03200000: 0000 00110 0 10 00 00 0000 000000000000
^
So the solution is to just don't require that bit to be set, because
it gets checked later using 'I', which results in the following value:
0x01200000: 0000 00010 0 10 00 00 0000 000000000000
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c, the following
functions:
WatchdogWriteOffsetRegister()
WatchdogWriteCompareRegister()
WatchdogEnable()
WatchdogDisable()
provide write access to ARM Generic Watchdog registers and use the values
returned by MmioWrite32() and MmioWrite64() as EFI_STATUS return codes.
Because MmioWriteXY() return the value passed as its write parameter,
Generic Watchdog access functions can spuriously return error codes which
are different from EFI_SUCCESS, e.g. the following call
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
}
will return MAX_UINT32 defined in MdePkg/Include/Base.h as
#define MAX_UINT32 ((UINT32)0xFFFFFFFF)
This commit declares all the functions listed above as VOID
and removes the code for checking their return values.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If timer interrupt is level sensitive, reloading timer compare
register has a side effect of clearing GIC pending status, so a "ISB"
is needed to make sure this instruction is executed before enabling
CPU IRQ, or else we may get spurious timer interrupts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The generic timer driver only EOIs the timer interrupt if
the ISTATUS bit is set. This is completely fine if you pretend
that spurious interrupts do not exist. But as a matter of fact,
they do, and the first one will leave the interrupt activated
at the GIC level, making sure that no other interrupt can make
it anymore.
Making sure that each interrupt Ack is paired with an EOI is the
way to go. Oh, and enabling the interrupt each time it is taken
is completely pointless. We entered this function for a good
reason...
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce CRT assembly replacements for __rt_sdiv, __rt_udiv,
__rt_udiv64, __rt_sdiv64, __rt_srsh (by reusing the RVCT code)
as well as memcpy and memset.
For MSFT compatibility, some of the code needs to be explicitly
forced to ARM, and the /oldit assembly flag needs to be added.
Also, while RVCT_ASM_EXPORT macro invocations have been removed,
the replacement code is designed to be as close as possible to
the one that would have been generated if using the macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
gEfiDebugSupportPeriodicCallbackProtocolGuid and
PcdCpuDxeProduceDebugSupport are referred to from CpuDxe.
Delete references from .inf and .h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This currently isn't needed by anything in the edk2 tree but
it's useful for externally maintained platforms which have
to set this register e.g. to disable alignment aborts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
From what I can see this bug dates back to the commit from 2011 where
support for this was added: 2cf4b60895
The first problem is that PopulateLevel2PageTable overflows the
translation table buffer because it doesn't verify that the size
actually fits within one level 2 page table.
The second problem is that the loop in FillTranslationTable doesn't
care about the PhysicalBase or the RemainLength and always substracts
one section size from RemainLength.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a missing newline to the version string output that is displayed
on the serial console, or the next line will be appended to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString is set to
a non-empty string, print it to the console at boot. Note that this
is independent of DEBUG/RELEASE or graphical vs serial console,
although we do attempt to stay clear of the logo and progress bar
in graphical mode, by printing it top center.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch add implementation of following new API introduced into
CpuExceptionHandlerLib. Since this lib hasn't support Stack Guard
and stack switch, the new method just calls original
InitializeCpuExceptionHandlers.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitDataEx OPTIONAL
);
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
With the last user FdtPlatformDxe removed, we can finally get rid of the
last bit of ARM BDS related cruft.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, each ARM platform built with RVCT that uses ArmHvcLib
or ArmSmcLib needs to specify a CPU target that implements both the
security and virtualization extensions, so that the assembler does
not choke on the 'hvc' and 'smc' instructions in ArmHvcLib/ArmSvcLib.
Let's move these overrides into the module .INFs so we can lift this
requirement at the platform side.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Flash region needs to be set as cacheable (write back) to increase
performance, if PEI is still XIP on flash or DXE FV is decompressed
from flash FV. However some ARM platforms do not support to set flash
as inner shareable since flash is not normal DDR memory and it will
not respond to cache snoop request, which will causes system hang
after MMU is enabled.
So we need a new ARM memory region attribute WRITE_BACK_NONSHAREABLE
for flash region on these platforms specifically. This attribute will
set the region as write back but not inner shared.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peicong Li <lipeicong@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch adds a library that enables invocation of SVCs from Exception
Level EL0. It will be used by the Standalone MM environment to request
services from a software running in a privileged EL e.g. ARM Trusted
Firmware. The library is derived directly from Arm SMC Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: assign frame pointer (AArch64)
keep stack alignment (ARM)]
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SVCs are in the range 0xC4000060 - 0xC400007f.
The functions available to the secure MM partition:
1. Signal completion of MM event handling.
2. Set/Get memory attributes for a memory region at runtime.
3. Get version number of secure partition manager.
Also, it defines memory attributes required for set/get operations.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch adds a list of function IDs that fall under the standard
SMC range as defined in [1]
SMCs associated with Management Mode are in the range 0xC4000040 -
0xC400005f (64 bit) and 0x84000040 - 0x8400005f (32 bit).
The function(s) available to the normal world:
1. Request services from the secure MM environment using MM_COMMUNICATE.
It also defines MM return codes.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARMv8.2-FP16 extension introduces support for half precision
floating point and the processor ID registers have been updated to
enable detection of the implementation.
The possible values for the FP bits in ID_AA64PFR0_EL1[19:16] are:
- 0000 : Floating-point is implemented.
- 0001 : Floating-point including Half-precision support is
implemented.
- 1111 : Floating-point is not implemented.
- All other values are reserved.
Previously ArmEnableVFP() compared the FP bits with 0000b to see if
the FP was implemented, before enabling FP. Modified this check to
enable the FP if the FP bits 19:16 are not 1111b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Even though RELEASE builds produce some diagnostics when a crash
occurs, they can be rather unhelpful:
Synchronous Exception at 0x0000000000000000
and sometimes, it would be useful to get a full register dump from
a production machine without having to modify the firmware.
This can be achieved very easily by incorporating a DEBUG build of
ARM's DefaultExceptionHandlerLib into a DXE driver, and registering
its DefaultExceptionHandler entry point as the synchronous exception
handler, overriding the default one. If we then build this driver
using the UefiDebugLibConOut DebugLib implementation, we end up
with a module than can simply be loaded via the Shell on any system.
Shell> load fs0:ArmCrashDumpDxe.efi
As a bonus, the crash dump will also appear on the graphical display,
not only on the serial port.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that we have a generic DmaLib implementation for non-coherent DMA,
let's get rid of the ARM specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that ArmDmaLib no longer uses uncached mappings for short-lived
bounce buffers used for streaming DMA, the only place we allocate
uncached memory is in DmaAllocateBuffer (), which is used for static
mappings shared between the host and the device, e.g., for packet
descriptor rings etc.
There is no performance concern around such long lived mappings, and
so we can really do without the overhead of UncachedMemoryAllocationLib,
which is a sizable chunk of poorly maintained code that never actually
releases any memory, and despite the fact that it implements pool based
routines, it always performs page based allocations anyway.
So let's invoke the DXE services directly to manage memory attributes
on allocations, and keep track of the allocations in a linked list so
we can restore the attributes and free the memory properly after use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ArmPkg implementation of DmaLib uses double buffering to ensure
that any attempt to perform non-coherent DMA on unaligned buffers cannot
corrupt adjacent unrelated data which happens to share cachelines with
the data we are exchanging with the device.
Such corruption can only occur on bus master write, in which case we have
to invalidate the caches to ensure the CPU will see the data written to
memory by the device. In the bus master read case, we can simply clean
and invalidate at the same time, which may purge unrelated adjacent data
from the caches, but will not corrupt its contents.
Also, this double buffer does not necessarily have to be allocated from
uncached memory: by the same reasoning, we can perform cache invalidation
on an ordinary pool allocation as long as we take the same alignment
constraints into account.
So update our code accordingly: remove double buffering from the bus
master read path, and switch to a pool allocation for the double buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=642
Add top level License.txt file with the BSD 2-Clause
License that is used by the majority of the EKD II open
source project content. Merge copyright statements
from the BSD 2-Clause License files in each package
directory and remove the duplication License.txt
file from package directories.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Bret Barkelew
Sami Mujawar
Ard Biesheuvel
Leif Lindholm
Laszlo Ersek
Jeff Brasen
Sumit Garg
Achin Gupta
Sughosh Ganu
Ming Huang
Haojian Zhuang
Marcin Wojtas
Ruiyu Ni
chenc2
Girish Pathak
Chris Co
Michael Zimmermann
AlexeiFedorov
Heyi Guo
Marc Zyngier
Pete Batard
Jian J Wang
Peicong Li
Supreeth Venkatesh
Evan Lloyd
Michael D Kinney