REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
The real variable driver has been updated to support emulated
variable NV mode and the EmuVariableRuntimeDxe will be removed
later, so use merged variable driver for emulated NV mode.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Clone the PrePi implementation for BeagleBoardPkg, so we can start
removing some of the awkward optimizations that we'd rather not keep
in reference code. Note that we only clone the unicore ARM flavor,
which is all we need for BeagleBoard.
In the case of PrePi, it involves libraries included by the SEC
startup code that are exposed to DXE core via HOBs containing function
pointers, which forces us to keep the primary FV reserved in memory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The TFTP command was converted from a NULL class library
instance to a dynamic shell command in commit 0961002352.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
for its reset handling. With the arrival
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
implementation of ResetSystemLib instead of the previous
EfiResetSystemLib.
Wire all reset variants to ResetCold, except for ResetShutdown and
EnterS3WithImmediateWake, which return immediately.
Note: this ResetSystemLib never supported being called after
ExitBootservices, and this shortcoming is not addressed here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Move to the new non-discoverable device protocols for wiring the PCI based
EHCI controller driver to the non-discoverable EHCI controller found on the
OMAP 3530.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LinuxLoader should no longer be used now that both the ARM and arm64
kernels as well as GRUB have full support for acting as an OS loader in
the UEFI spec sense. So remove it from the Beagle build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Drop the ARM BDS and related dependencies, and switch to the generic
BDS instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Build-tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Build-tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
It is also to remove the reference to TemplateSerialPortExtLib in
EmbeddedPkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18970 6f19259b-4bc3-4df7-8a09-765794883524
Since the configuration header never changes unless the board parameters
in ConfigurationHeader.dat are updated, we can take a snapshot of the
binary and add it to the FDF definition. This way, it will get emitted
by the EDK2 build system instead of having to use a separate
post-processing tool to add it to the flash image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18210 6f19259b-4bc3-4df7-8a09-765794883524
Add the legacy Linux Loader EFI application to the ARM
development platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17968 6f19259b-4bc3-4df7-8a09-765794883524
By default, a MemoryMap() EFI Device Path is created
for the Firmware Volumes.
It means it is difficult to build a Non-Volatile permanent
Device Path for the Firmware Volume as the location in
System Memory may change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17827 6f19259b-4bc3-4df7-8a09-765794883524
GCC47 generates bigger binaries in Debug build than GCC46.
This large increase is considered as a regression.
It will require some investigation to understand the reason
of this increase in size.
The size of the FV has been increased to allow developers to
build these images with the current BaseTools.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14611 6f19259b-4bc3-4df7-8a09-765794883524
BaseTools now raises an error when a PCD is not declared in a DEC.
This change:
- Remove undeclared PCDs
- Add PCD declaration to DEC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13195 6f19259b-4bc3-4df7-8a09-765794883524
The USB stack has been fixed last year (cache coherencey issue in DmaLib).
USB stack has been tested on BeagleBoard-xm with rev 12923 (10/01/2012).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12924 6f19259b-4bc3-4df7-8a09-765794883524
It is the tool BeagleBoardPkg/Tools/generate_image which will add a CH header to a the
BeagleBoard FD file.
The build macro EDK2_SECOND_STAGE_BOOTOLADER is not required any more.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12433 6f19259b-4bc3-4df7-8a09-765794883524
By setting this macro, the OMAP353x header is stripped from the UEFI firmware.
Some boot loader (eg: x-loader) loads the second stage boot loader (u-boot or
uefi) to a specific address and start the firmware from this address.
This macro ensures the reset vector is located at the beginning of the image.
To build the BeagleBoard with ./build.sh to enable this feature:
./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1
Note: in this case, you must use BEAGLEBOARD_EFI.fd (and not
BeagleBoard_EFI_flashboot.fd)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11995 6f19259b-4bc3-4df7-8a09-765794883524
BeagleBoardPkg: Switch to ArmPLatformPkg/Bds
The ArmPlatformPkg/Bds is able to boot Linux. Set the default boot device
for the BeagleBoardc to the SD card.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11971 6f19259b-4bc3-4df7-8a09-765794883524
ArmPkg - Supoprt for ARM specific things that can change as the architecture changes. Plus semihosting JTAG drivers.
EmbeddedPkg - Generic support for an embeddded platform. Including a light weight command line shell.
BeagleBoardPkg - Platform specifics for BeagleBoard. SD Card works, but USB has issues. Looks like a bug in the open source USB stack (Our internal stack works fine).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9518 6f19259b-4bc3-4df7-8a09-765794883524
Michael D Kinney
Star Zeng
Ard Biesheuvel
Ruiyu Ni
Leif Lindholm
Jordan Justen
Ronald Cron
Olivier Martin
oliviermartin
andrewfish
hhtian
AJFISH