'-t or -terse' and '-s' flags are multiple exclusive
So when both flags are used together, command should report an error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
While most compilers happily allow arithmetic on void pointer,
the RVCT compiler does not, and throws the following warning for
NorFlashDxe:
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c(894,48) :
error #1254-D: arithmetic on pointer to void or function type
Since the expression in question involves a cast from UINTN to VOID*,
simply add some parentheses to eliminate this warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
All users have moved to the generic or accelerated versions in MdePkg,
so remove the obsolete BaseMemoryLibStm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The library BaseMemoryLibStm in ArmPkg is deprecated and is going to be
removed. Move to the generic version in MdePkg instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The global variable mSystemMemoryEnd is initialized by PrePi only if
it has not been initialized by ArmPlatformPeiBootAction(). This allows
platforms executing under, e.g., ARM Trusted Firmware to dynamically
reserve a window at the top of memory that will be used by the secure
firmware.
However, PrePi is a SEC module, and writing to a global variable
violates the SEC constraints, since SEC and PEI may execute from NOR
flash.
So instead, initialize mSystemMemoryEnd statically. This will ensure
it holds the correct value for all implementations where the value
is not overridden, but still allows it to be overridden during the
call to ArmPlatformPeiBootAction().
Note that this patch also fixes a latent bug on 32-bit platforms where
a value of mSystemMemoryEnd exceeding 4 GB would be truncated to 32-bits
rather than limited to (4 GB - 1)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Recording the top of SEC visible system memory in a global variable is
not necessary, and violates the constraints of the SEC/PEI environment,
given that it may execute from NOR flash. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Rework the argument parsing logic to a more extensible traditional
while/case setup to prepare for further additions.
While doing that, align the Usage printout to look a bit more like
the output of Edk2Setup.bat (and be more correct).
And also stop passing around command line options to the BuildEnv
script (which does not check them anyway).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Following the same approach as toolsetup.bat:
If build.exe, TargetTool.exe, Trim.exe or GenFds.exe is missing, run its
Python source instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Support --nt32 X64 for building 64-bit NT32.
For setting up Windows environment variables requited by NT32, follow the
same approach as Edk2Setup.bat by using the get_vsvars.bat and
SetVisualStudio.bat.
Sync the help text of NT32 with Edk2Setup.bat.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- paramter -> parameter
- availible -> available
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
/MD option will introduce the specific version dll dependency. It will cause
the compiled C tools not work on some system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Since All the GIC base address variables has been aligned to 64-bit, it
doesn't make sense to continue use MAX_UINT32 in ASSERT() statement, so
this patch uses MAX_UINTN to adapt to this kind of change.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In EDK2, DEBUG_* is recommended to be used instead of EFI_D_*. For new
code, they should use DEBUG_* macro.
Fixes:https://bugzilla.tianocore.org/show_bug.cgi?id=143
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The bug is that only remove the first [] when it does the char count,
however sometimes we use [edk2][patch] as prefix, this patch fix this bug.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch update PatchCheck.py:
1. The subject line of the commit message should be < 72 characters.
2. The other lines of the commit message should be < 76 characters.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Interestingly the build used to succeed even with missing leading '0x'
prefix for a hex value before the commit 0613ccbd13
("CorebootPayloadPkg/PciHostBridgeLib: Fix the wrong PCI resource limit")
With the above commit, luckily we get
...
raise BadExpression(ERR_ARRAY_ELE % self._Token)
BadExpression: This must be HEX value for NList or Array: [e6].
This patch fixes the above error by adding the missing '0x' prefix to
the hex value.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current PCI resource limit calculation in CorebootPayloadPkg
PciHostBridgeLib is wrong. Adjusted it to match the PciHostBridge
driver's expectation.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by : Prince Agyeman <prince.agyeman@intel.com>
The function which handles the "Boot####", "BootOrder" ...
may return failure. This patch adds the error handling codes.
return the failure info to browser.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When user enter the "Change Boot Order" page, the BootOptionOrder in
BmmFakeNvData may maintain some uncommitted data which are not saved
in "BootOrder" Variable and BootOptionMenu. So we should not always get
the BootOptionOrder through the function GetBootOrder, it will
result in incorrect UI behaviors. When the BootOptionOrder has not been
saved, we should use the BootOptionOrder in current BmmFakeNvData.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In BootMaintRouteConfig function, it will compare the data in BmmFakeNvData
and BmmOldFakeNVData to see whether there are some changes need to save.
In current codes when discarding changes or removing the useless changes,
it will update the related fields in BmmFakeNvData.
But also need to update related fields in BmmOldFakeNVData,
or it will result in incorrect comparison in BootMaintRouteConfig function,
then resulting in incorrect UI behaviors.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When updating console page, the "ConsoleCheck" in BmmFakeNvData may maintain
the old uncommitted data, we should not copy it to BmmOldFakeNVData.
And in BootMaintRouteConfig function, when save data successfully,
it will copy the BmmFakeNvData to the BmmOldFakeNVData.
So we can delete the logic here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In current codes, When user does some change related to Console or Terminal,
when saving data, it will update the content in TerminalMenu and ConsoleMenu
in BootMaintRouteConfig function. This patch moves the update action to the
BootMaintCallback function with EFI_BROWSER_ACTION_CHANGED type.
The reason for this change is: in BootMaintRouteConfig function when
Var_UpdateConsoleXXXOption() return failure and user discard the previous
change, we should re_update the content in the TerminalMenu and ConsoleMenu.
So we move the update action to the changed callback.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When fail to submit data and user discard the change, we should send
the discard info to driver with EFI_BROWSER_ACTION_CHANGED callback.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ruiyu Ni
Tapan Shah
Ard Biesheuvel
Leif Lindholm
Cinnamon Shia
Gary Lin
Zhang, Chao B
Liming Gao
Dennis Chen
Giri P Mudusuru
Jiaxin Wu
Yonghong Zhu
Sudeep Holla
Maurice Ma
Dandan Bi