Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Current SmmDebugAgentLib will initialize IDT table to support source debugging
at each time SMI entry on SMM BSP. Actually, we only need to initialize IDT
table at first time SMI entry.
Add one flag to avoid re-initializing IDT table.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
#define MSR_IA32_APIC_BASE_ADDRESS is duplicated with #define MSR_IA32_APIC_BASE
defined in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it
and update the modules to use MSR_IA32_APIC_BASE from ArchitecturalMsr.h.
Structure MSR_IA32_APIC_BASE conflicts with #define MSR_IA32_APIC_BASE defined
in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it and
update the modules to use structure MSR_IA32_APIC_BASE_REGISTER from
ArchitecturalMsr.h.
v5:
1. Update SourceLevelDebugPkg to use APIC Base MSR from ArchitecturalMsr.h.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/AsmFuncs.asm to X64/AsmFuncs.nasm.
And, manually update the wrong replacement with 0H.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/AsmFuncs.asm to Ia32/AsmFuncs.nasm.
And, manually update the wrong replacement with 0H.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IntHandler.asm to X64/IntHandler.nasm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IntHandler.asm to Ia32/IntHandler.nasm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
mMailboxPointer is used before it is initialization. This issue only happens
when SmmDebugAgent is initialized without PeiDebugAgent or DxeDebugAgent
initialization. The fix is to use Mailbox instead.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Update the local variable type to avoid potential data overflow.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19734 6f19259b-4bc3-4df7-8a09-765794883524
DxeDebugAgentLib instance produces gEfiDebugAgentGuid system table.
Its usage should be PRODUCES instead of SOMETIMES_PRODUCES.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19316 6f19259b-4bc3-4df7-8a09-765794883524
To convert these files I ran:
$ python3 BaseTools/Scripts/ConvertUni.py SourceLevelDebugPkg
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19263 6f19259b-4bc3-4df7-8a09-765794883524
Update DebugAgent to make sure the Local APIC SoftwareEnable bit is set
before using the Local APIC Timer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18712 6f19259b-4bc3-4df7-8a09-765794883524
Actually, TimerCycle is APIC timer's initial count. Timer count value 0 is
missed when calculating Delta value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18329 6f19259b-4bc3-4df7-8a09-765794883524
If CPU runs fast and timer runs slow, two GetApicTimerCurrentCount() may return
the same timer count value. We need to consider timer roll-over not happened.
Otherwise, one false timeout flag will be set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18328 6f19259b-4bc3-4df7-8a09-765794883524
In DEBUG_AGENT_INIT_POSTMEM_SEC case, caller may disable/restore CPU interrupt
to protect the stack/heap migration. SecPeiDebugAgentLib cannot always enable
CPU interrupt. Otherwise system may crash during stack/heap migration.
SecPeiDebugAgentLib should restore original CPU interrupt state in
DEBUG_AGENT_INIT_POSTMEM_SEC case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Brian J. Johnson <bjohnson@sgi.com>
Tested-by: Brian J. Johnson <bjohnson@sgi.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17916 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes to debug timer initialization (commit 2befbc82, svn 17572)
modified the Sec/Pei InitializeDebugAgent() routine to enable debug timer
interrupts. This causes problems in the DEBUG_AGENT_INIT_POSTMEM_SEC case:
the callers appear to assume that if they block timer interrupts before the
call, interrupts will remain blocked afterwards.
It is not always safe to have interrupts enabled on return from
InitializeDebugAgent(). For instance, after calling InitializeDebugAgent(),
OvmfPkg's TemporaryRamMigration() moves the stack, heap, and IDT to RAM, then
switches to the new stack. Only then does it reenable timer interrupts.
Taking an interrupt during this process can corrupt state, causing crashes.
Do not unmask the debug timer interrupt in the DEBUG_AGENT_INIT_POSTMEM_SEC
case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian J. Johnson <bjohnson@sgi.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17893 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes to debug timer handling ended up leaving the timer disabled in
PEI. This made it impossible to stop execution in PEI externally via the
debugger. Enable the timer when InitializeDebugAgent calls
InitializeDebugAgentPhase2, as well as when it returns directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian J. Johnson <bjohnson@sgi.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17819 6f19259b-4bc3-4df7-8a09-765794883524
OffsetHigh is 16bit value and its type is UINT32 and defined in structure.
It will be 32bit int type after do 16-bit left-shift operation. Then it will
sign extension if cast it to UINT64 if its high bit is 1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Scott Duplichan <scott@notabs.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17716 6f19259b-4bc3-4df7-8a09-765794883524
Now Debug Agent library uses Local APIC Timer to implement time-out mechanism.
For AP, its local APIC timer may not work. This fix is to initialize Local
APIC timer if it doesn't work as expected when debugging AP function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17604 6f19259b-4bc3-4df7-8a09-765794883524
InitializeApicTimer() will enable Local APIC timer interrupt. Even though we
disable CPU interrupt at the beginning and enable CPU Interrupt after debug
agent initialized completely, some Boot Service may invoke RestoreTpl () which
may enable CPU interrupt.
We should disable Local APIC timer in InitializeDebugTimer () to avoid Debug
Timer interrupt happens during debug port and debug agent initialization phase.
And enable Debug Timer interrupt after debug agent is initialized.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17572 6f19259b-4bc3-4df7-8a09-765794883524
Check PcdDebugPortHandleBufferSize before allocate buffer.
PeriodicMode is BOOLEAN type, needn't to use == TRUE in if condition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17558 6f19259b-4bc3-4df7-8a09-765794883524
Add one parameter DumpFlag to indicate if need to dump Local APIC time's
parameter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17501 6f19259b-4bc3-4df7-8a09-765794883524
Now Debug Agent library uses Local APIC Timer to implement time-out mechanism.
In SMM, SMM BSP maybe not be the one in DXE phase, its local APIC timer may not
work. This fix is to initialize Local APIC timer if it doesn't work as expected
at SMM entry.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17500 6f19259b-4bc3-4df7-8a09-765794883524
The root cause is SerialPortDebugCommunicationLib returns NULL debug port handle causing the CompressData() doesn't send the compressed data.
The fix doesn't rely on the debug port handle value and uses Send parameter to indicate whether to send the compressed data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17464 6f19259b-4bc3-4df7-8a09-765794883524
Now DxeDebugAgent Library instance will print help information on how to load
DebugAgentDxe.efi in UEFI shell. But it is printed after Target connected to
Host side. This fix is to move help info print to DebugAgentDxe module before
Target tries to connect HOST. It could help developer to get useful information
as early as possible.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17458 6f19259b-4bc3-4df7-8a09-765794883524
Now Debug Agent library uses Local APIC Timer to implement time-out mechanism.
But it does not initialize Local APIC Timer before transfer data with HOST.
This fix is to move Local APIC Timer initialization to
SetupDebugAgentEnvironment().
This fix also updates function header and fixed one typo of
SetupDebugAgentEnvironment() name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17457 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17220 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions.
Force use of software breakpoints if debug extensions are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17219 6f19259b-4bc3-4df7-8a09-765794883524
Avoid use of Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS) if there is only 1 CPU present.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17218 6f19259b-4bc3-4df7-8a09-765794883524
Clear EFLAGS.IF before executing Stepping command and save original
value in DEBUG_AGENT_FLAG. It could avoid pending interrupt issued
during executing Stepping command. Restore EFLAGS.IF after Stepping
command execution finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17204 6f19259b-4bc3-4df7-8a09-765794883524
Add InterruptFlag field in DEBUG_AGENT_FLAG. This field is used to
save/restore EFLAGS.IF across Stepping command execution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17203 6f19259b-4bc3-4df7-8a09-765794883524
It will avoid that exception issued by Debug Agent itself was skipped.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17190 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Hao Wu
Gary Lin
Liming Gao
Laszlo Ersek
Eric Dong
Jordan Justen
Michael Kinney
Ruiyu Ni
Qiu Shumin
Brian J. Johnson
Feng Tian