Fix various typos in comments and documentation.
When "VbeShim.asm" is modified, we have to re-run "VbeShim.sh"
to update "VbeShim.h".
The string modified by this patch is only used when the DEBUG
macro (at the top of the file) is commented out. Since the
string is not referenced, NASM eliminates it, resulting in
the same byte array content in "VbeShim.h".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-58-philmd@redhat.com>
Fix a typo in the header documentation.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-57-philmd@redhat.com>
Now that the SMRAM at the default SMBASE is honored everywhere necessary,
implement the actual detection. The (simple) steps are described in
previous patch "OvmfPkg/IndustryStandard: add MCH_DEFAULT_SMBASE* register
macros".
Regarding CSM_ENABLE builds: according to the discussion with Jiewen at
https://edk2.groups.io/g/devel/message/48082http://mid.mail-archive.com/74D8A39837DF1E4DA445A8C0B3885C503F7C9D2F@shsmsx102.ccr.corp.intel.com
if the platform has SMRAM at the default SMBASE, then we have to
(a) either punch a hole in the legacy E820 map as well, in
LegacyBiosBuildE820() [OvmfPkg/Csm/LegacyBiosDxe/LegacyBootSupport.c],
(b) or document, or programmatically catch, the incompatibility between
the "SMRAM at default SMBASE" and "CSM" features.
Because CSM is out of scope for the larger "VCPU hotplug with SMM"
feature, option (b) applies. Therefore, if the CSM is enabled in the OVMF
build, then PlatformPei will not attempt to detect SMRAM at the default
SMBASE, at all. This is approach (4) -- the most flexible one, for
end-users -- from:
http://mid.mail-archive.com/868dcff2-ecaa-e1c6-f018-abe7087d640c@redhat.comhttps://edk2.groups.io/g/devel/message/48348
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200129214412.2361-12-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the DXE phase and later, it is possible for a module to dynamically
determine whether a CSM is enabled. An example can be seen in commit
855743f717 ("OvmfPkg: prevent 64-bit MMIO BAR degradation if there is no
CSM", 2016-05-25).
SEC and PEI phase modules cannot check the Legacy BIOS Protocol however.
For their sake, introduce a new feature PCD that simply reflects the
CSM_ENABLE build flag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200129214412.2361-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
During normal boot, when EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed
by platform BDS, the SMM IPL locks SMRAM (TSEG) through
EFI_SMM_ACCESS2_PROTOCOL.Lock(). See SmmIplReadyToLockEventNotify() in
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c".
During S3 resume, S3Resume2Pei locks SMRAM (TSEG) through
PEI_SMM_ACCESS_PPI.Lock(), before executing the boot script. See
S3ResumeExecuteBootScript() in
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume.c".
Those are precisely the places where the SMRAM at the default SMBASE
should be locked too. Add such an action to SmramAccessLock().
Notes:
- The SMRAM at the default SMBASE doesn't support the "closed and
unlocked" state (and so it can't be closed without locking it, and it
cannot be opened after closing it).
- The SMRAM at the default SMBASE isn't (and shouldn't) be exposed with
another EFI_SMRAM_DESCRIPTOR in the GetCapabilities() members of
EFI_SMM_ACCESS2_PROTOCOL / PEI_SMM_ACCESS_PPI. That's because the SMRAM
in question is not "general purpose"; it's only QEMU's solution to
protect the initial SMI handler from the OS, when a VCPU is hot-plugged.
Consequently, the state of the SMRAM at the default SMBASE is not
reflected in the "OpenState" / "LockState" fields of the protocol and
PPI.
- An alternative to extending SmramAccessLock() would be to register an
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL notify in SmmAccess2Dxe (for locking
at normal boot), and an EDKII_S3_SMM_INIT_DONE_GUID PPI notify in
SmmAccessPei (for locking at S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When OVMF runs in a SEV guest, the initial SMM Save State Map is
(1) allocated as EfiBootServicesData type memory in OvmfPkg/PlatformPei,
function AmdSevInitialize(), for preventing unintended information
sharing with the hypervisor;
(2) decrypted in AmdSevDxe;
(3) re-encrypted in OvmfPkg/Library/SmmCpuFeaturesLib, function
SmmCpuFeaturesSmmRelocationComplete(), which is called by
PiSmmCpuDxeSmm right after initial SMBASE relocation;
(4) released to DXE at the same location.
The SMRAM at the default SMBASE is a superset of the initial Save State
Map. The reserved memory allocation in InitializeRamRegions(), from the
previous patch, must override the allocating and freeing in (1) and (4),
respectively. (Note: the decrypting and re-encrypting in (2) and (3) are
unaffected.)
In AmdSevInitialize(), only assert the containment of the initial Save
State Map, in the larger area already allocated by InitializeRamRegions().
In SmmCpuFeaturesSmmRelocationComplete(), preserve the allocation of the
initial Save State Map into OS runtime, as part of the allocation done by
InitializeRamRegions(). Only assert containment.
These changes only affect the normal boot path (the UEFI memory map is
untouched during S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-9-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The 128KB SMRAM at the default SMBASE will be used for protecting the
initial SMI handler for hot-plugged VCPUs. After platform reset, the SMRAM
in question is open (and looks just like RAM). When BDS signals
EFI_DXE_MM_READY_TO_LOCK_PROTOCOL (and so TSEG is locked down), we're
going to lock the SMRAM at the default SMBASE too.
For this, we have to reserve said SMRAM area as early as possible, from
components in PEI, DXE, and OS runtime.
* QemuInitializeRam() currently produces a single resource descriptor HOB,
for exposing the system RAM available under 1GB. This occurs during both
normal boot and S3 resume identically (the latter only for the sake of
CpuMpPei borrowing low RAM for the AP startup vector).
But, the SMRAM at the default SMBASE falls in the middle of the current
system RAM HOB. Split the HOB, and cover the SMRAM with a reserved
memory HOB in the middle. CpuMpPei (via MpInitLib) skips reserved memory
HOBs.
* InitializeRamRegions() is responsible for producing memory allocation
HOBs, carving out parts of the resource descriptor HOBs produced in
QemuInitializeRam(). Allocate the above-introduced reserved memory
region in full, similarly to how we treat TSEG, so that DXE and the OS
avoid the locked SMRAM (black hole) in this area.
(Note that these allocations only occur on the normal boot path, as they
matter for the UEFI memory map, which cannot be changed during S3
resume.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The permanent PEI RAM that is published on the normal boot path starts
strictly above MEMFD_BASE_ADDRESS (8 MB -- see the FDF files), regardless
of whether PEI decompression will be necessary on S3 resume due to
SMM_REQUIRE. Therefore the normal boot permanent PEI RAM never overlaps
with the SMRAM at the default SMBASE (192 KB).
The S3 resume permanent PEI RAM is strictly above the normal boot one.
Therefore the no-overlap statement holds true on the S3 resume path as
well.
Assert the no-overlap condition commonly for both boot paths in
PublishPeiMemory().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Q35SmramAtDefaultSmbaseInitialization() function for
detecting the "SMRAM at default SMBASE" feature.
For now, the function is only a skeleton, so that we can gradually build
upon the result while the result is hard-coded as FALSE. The actual
detection will occur in a later patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Before adding another SMM-related, and therefore Q35-only, dynamically
detectable feature, extract the current board type check from
Q35TsegMbytesInitialization() to a standalone function.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller
Register Address Map (D0:F0)" leaves the byte register at config space
offset 0x9C unused.
On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature,
firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset
MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is
MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the
range mentioned below is open (accessible to code running outside of SMM).
Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register,
the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE)
gets closed and locked down, and the register becomes read-only. The area
is reopened, and the register becomes read/write, at platform reset.
Add the above-listed macros to "Q35MchIch9.h".
(There are some other unused offsets in Table 5-1; for example we had
scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the
first byte-wide register standing in isolation after 0x50.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In a subsequent patch, we'll introduce new DRAM controller macros in
"Q35MchIch9.h". Their names are too long for the currently available
vertical whitespace, so increase the latter first.
There is no functional change in this patch ("git show -b" displays
nothing).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For supporting VCPU hotplug with SMM enabled/required, QEMU offers the
(dynamically detectable) feature called "SMRAM at default SMBASE". When
the feature is enabled, the firmware can lock down the 128 KB range
starting at the default SMBASE; that is, the [0x3_0000, 0x4_FFFF]
interval. The goal is to shield the very first SMI handler of the
hotplugged VCPU from OS influence.
Multiple modules in OVMF will have to inter-operate for locking down this
range. Introduce a dynamic PCD that will reflect the feature (to be
negotiated by PlatformPei), for coordination between drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
MaxCpuCountInitialization() currently handles the following options:
(1) QEMU does not report the boot CPU count (FW_CFG_NB_CPUS is 0)
In this case, PlatformPei makes MpInitLib enumerate APs up to the
default PcdCpuMaxLogicalProcessorNumber value (64) minus 1, or until
the default PcdCpuApInitTimeOutInMicroSeconds (50,000) elapses.
(Whichever is reached first.)
Time-limited AP enumeration had never been reliable on QEMU/KVM, which
is why commit 45a70db3c3 strated handling case (2) below, in OVMF.
(2) QEMU reports the boot CPU count (FW_CFG_NB_CPUS is nonzero)
In this case, PlatformPei sets
- PcdCpuMaxLogicalProcessorNumber to the reported boot CPU count
(FW_CFG_NB_CPUS, which exports "PCMachineState.boot_cpus"),
- and PcdCpuApInitTimeOutInMicroSeconds to practically "infinity"
(MAX_UINT32, ~71 minutes).
That causes MpInitLib to enumerate exactly the present (boot) APs.
With CPU hotplug in mind, this method is not good enough. Because,
using QEMU terminology, UefiCpuPkg expects
PcdCpuMaxLogicalProcessorNumber to provide the "possible CPUs" count
("MachineState.smp.max_cpus"), which includes present and not present
CPUs both (with not present CPUs being subject for hot-plugging).
FW_CFG_NB_CPUS does not include not present CPUs.
Rewrite MaxCpuCountInitialization() for handling the following cases:
(1) The behavior of case (1) does not change. (No UefiCpuPkg PCDs are set
to values different from the defaults.)
(2) QEMU reports the boot CPU count ("PCMachineState.boot_cpus", via
FW_CFG_NB_CPUS), but not the possible CPUs count
("MachineState.smp.max_cpus").
In this case, the behavior remains unchanged.
The way MpInitLib is instructed to do the same differs however: we now
set the new PcdCpuBootLogicalProcessorNumber to the boot CPU count
(while continuing to set PcdCpuMaxLogicalProcessorNumber identically).
PcdCpuApInitTimeOutInMicroSeconds becomes irrelevant.
(3) QEMU reports both the boot CPU count ("PCMachineState.boot_cpus", via
FW_CFG_NB_CPUS), and the possible CPUs count
("MachineState.smp.max_cpus").
We tell UefiCpuPkg about the possible CPUs count through
PcdCpuMaxLogicalProcessorNumber. We also tell MpInitLib the boot CPU
count for precise and quick AP enumeration, via
PcdCpuBootLogicalProcessorNumber. PcdCpuApInitTimeOutInMicroSeconds is
irrelevant again.
This patch is a pre-requisite for enabling CPU hotplug with SMM_REQUIRE.
As a side effect, the patch also enables S3 to work with CPU hotplug at
once, *without* SMM_REQUIRE.
(Without the patch, S3 resume fails, if a CPU is hot-plugged at OS
runtime, prior to suspend: the FW_CFG_NB_CPUS increase seen during resume
causes PcdCpuMaxLogicalProcessorNumber to increase as well, which is not
permitted.
With the patch, PcdCpuMaxLogicalProcessorNumber stays the same, namely
"MachineState.smp.max_cpus". Therefore, the CPU structures allocated
during normal boot can accommodate the CPUs at S3 resume that have been
hotplugged prior to S3 suspend.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191022221554.14963-4-lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In v1.5.0, QEMU's "pc" (i440fx) board gained a "CPU present bitmap"
register block. In v2.0.0, this was extended to the "q35" board.
In v2.7.0, a new (read/write) register interface was laid over the "CPU
present bitmap", with an option for the guest to switch the register block
to the new (a.k.a. modern) interface.
Both interfaces are documented in "docs/specs/acpi_cpu_hotplug.txt" in the
QEMU tree.
Add macros for a minimal subset of the modern interface, just so we can
count the possible CPUs (as opposed to boot CPUs) in a later patch in this
series.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191022221554.14963-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PcdCpuMaxLogicalProcessorNumber and PcdCpuApInitTimeOutInMicroSeconds are
only referenced in "OvmfPkg/PlatformPei/PlatformPei.inf", and OvmfXen does
not include that module. Remove the unnecessary dynamic PCD defaults from
"OvmfXen.dsc".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20191022221554.14963-2-lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The HII pages that are part of Tcg2ConfigDxe expect the following PCDs
to be of dynamic HII type, so declare them as such.
gEfiSecurityPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2AcpiTableRev
Currently, the TPM2 ACPI table is not produced, since we do not
incorporate the Tcg2Smm module, which implements the SMI based
physical presence interface exposed to the OS.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Put the TPM2 related DXE modules together in the DSC, and add a
TPM2 support header comment while at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sets gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc, and OvmfPkgX64.dsc
so that when SMM_REQUIRE is TRUE, the SMM variable driver will not
use the runtime variable cache.
This is done for OvmfPkg because it currently depends upon a SMM
variable GetVariable ()implementation as a simple method to exercise
the SMM driver stack. This allows the following commands to be used
for variables such as Boot####, BootOrder, and BootNext to test SMM
timing and stability differences on the BSP (e.g. CPU#0) vs an
AP (e.g. CPU#1).
# taskset -c 0 efibootmgr
# taskset -c 1 efibootmgr
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
In the following call tree:
PlatformInit ()
mInstalledPackages = HiiAddPackages ()
GopInstalled ()
PopulateForm (PackageList = mInstalledPackages)
CreateResolutionOptions (PackageList)
HiiSetString (PackageList
HiiUpdateForm (PackageList)
PlatformDxe passes around an EFI_HII_HANDLE that (a) originates from
HiiAddPackages() and (b) is ultimately passed to HiiSetString() and
HiiUpdateForm(). The intermediate functions PopulateForm() and
CreateResolutionOptions() however take that parameter as an
(EFI_HII_HANDLE*).
There is no bug in practice (because the affected functions never try to
de-reference the "PackageList" parameter, they just pass it on), but the
function prototypes are semantically wrong. Fix that.
This could remain hidden so long because pointer-to-VOID silently converts
to/from any pointer-to-object type, and the UEFI spec mandates that
EFI_HII_HANDLE be a typedef to (VOID*).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SignalEvent() boot service takes an EFI_EVENT, not an (EFI_EVENT*).
Fix the call in the notification function of
"EFI_SIMPLE_NETWORK_PROTOCOL.WaitForPacket".
This is an actual bug. The reason it's never been triggered is likely that
the "SNP.WaitForPacket" event is rarely waited for by applications -- edk2
itself has zero instances of that, for example.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
This is an actual bug. It must have remained hidden until now because it's
on an error path. Fix the UninstallMultipleProtocolInterfaces() call.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Since commit 35e242b698 ("MdePkg/BaseLib: rewrite Base64Decode()",
2019-07-16), Base64Decode() guarantees that DestinationSize is larger on
output than it was on input if RETURN_BUFFER_TOO_SMALL is returned. Clean
up the retval handling for the first Base64Decode() call in
EnrollDefaultKeys, which used to work around the ambiguity in the previous
Base64Decode() interface contract.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1981
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
A Xen PVH guest doesn't have a RTC that OVMF would expect, so
PcatRealTimeClockRuntimeDxe fails to initialize and prevent the
firmware from finish to boot. To prevent that, we will use
XenRealTimeClockLib which simply always return the same time.
This will work on both Xen PVH and HVM guests.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-36-anthony.perard@citrix.com>
Move XenRealTimeClockLib from ArmVirtPkg to OvmfPkg so it can be used
from the OvmfPkg by the following patch, "OvmfPkg/OvmfXen: use
RealTimeClockRuntimeDxe from EmbeddedPkg"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-35-anthony.perard@citrix.com>
XenIoPvhDxe use XenIoMmioLib to reserve some space to be use by the
Grant Tables.
The call is only done if it is necessary, we simply detect if the
guest is PVH, as in this case there is currently no PCI bus, and no
PCI Xen platform device which would start the XenIoPciDxe and allocate
the space for the Grant Tables.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-34-anthony.perard@citrix.com>
Introduce PcdXenGrantFrames to replace a define in XenBusDxe and allow
the same value to be used in a different module.
The reason for the number of page to be 4 doesn't exist anymore, so
simply remove the comment.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-33-anthony.perard@citrix.com>
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
"OvmfPkg/8254TimerDxe" is replaced with a Xen-specific
EFI_TIMER_ARCH_PROTOCOL implementation. Also remove
8259InterruptControllerDxe as it is not used anymore.
This Timer uses the local APIC timer as time source as it can work on
both a Xen PVH guest and an HVM one.
Based on the "OvmfPkg/8254TimerDxe" implementation.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-31-anthony.perard@citrix.com>
PcdFSBClock is used by SecPeiDxeTimerLibCpu, the TimerLib
implementation. It will also be used by XenTimerDxe. Override
PcdFSBClock to match Xen vLAPIC timer frequency.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-30-anthony.perard@citrix.com>
When running in a Xen PVH guest, there's nothing to do in
PciAcpiInitialization() because there isn't any PCI bus. When the Host
Bridge DID isn't recognised, simply continue. (The value of
PcdOvmfHostBridgePciDevId would be 0 because it isn't set.)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-29-anthony.perard@citrix.com>
Replace the XenDetected() implementation by the one from
XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-28-anthony.perard@citrix.com>
We are going to replace XenDetected() implementation in
PlatformBootManagerLib by the one in XenPlatformLib.
PlatformBootManagerLib's implementation does cache the result of
GetFirstGuidHob(), so we do something similar in XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-27-anthony.perard@citrix.com>
When the device ID of the host bridge is unknown, check if we are
running as a PVH guest as there is no PCI bus in that case.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-26-anthony.perard@citrix.com>
Linux panic if the VGA region isn't reserved.
When Linux is booted on EFI system, it expects the memory at 0xa0000 to
_not_ be conventional memory. Otherwise a variable isn't initialised
properly and Linux panic when a virtual console/terminal is asked to be
created.
See for more detail:
https://lists.xenproject.org/archives/html/xen-devel/2019-03/msg02139.html
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-25-anthony.perard@citrix.com>
When running as a Xen PVH guest, there is no CMOS to read the memory
size from. Rework GetSystemMemorySize(Below|Above)4gb() so they can
work without CMOS by reading the e820 table.
Rework XenPublishRamRegions to also care for the reserved and ACPI
entry in the e820 table. The region that was added by InitializeXen()
isn't needed as that same entry is in the e820 table provided by
hvmloader.
MTRR settings aren't modified anymore, on HVM it's already done by
hvmloader, on PVH it is supposed to have sane default. MTRR will need
to be done properly but keeping what's already been done by programs
that have run before OVMF will do for now.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-24-anthony.perard@citrix.com>
When the Xen PVH entry point has been used, hvmloader hasn't run and
hasn't prepared an E820 table. The only way left to get an E820 table
is to ask Xen via an hypercall. We keep the result cached to avoid
making a second hypercall which would give the same result.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-23-anthony.perard@citrix.com>
The informations to make a XENMEM_memory_map hypercall is copied over
from the public header of the Xen Project, with the type name modified
to build on OVMF.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-22-anthony.perard@citrix.com>
XenPvhDetected() can be used to figure out if OVMF has started via the
Xen PVH entry point.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-21-anthony.perard@citrix.com>
We are going to need to make an hypercall in order to retreive the E820
table from the hypervisor before been able to setup the memory.
Calling XenConnect earlier will allow to setup the XenHypercallLib
earlier to allow to make hypercalls.
While here, add some comments in XenConnect().
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-20-anthony.perard@citrix.com>
This new XenHvmloaderDetected() return true if the hvmloader firmware
has runned before OVMF.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-19-anthony.perard@citrix.com>
The XenPlatformPei needs to make hypercalls, but the XenHypercallLib was
initialised before the HyperPage was ready. Now that XenPlatformPei has
initialised the HyperPage, reinitialise the XenHypercallLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-18-anthony.perard@citrix.com>
Antoine Coeur
Philippe Mathieu-Daudé
Laszlo Ersek
Ard Biesheuvel
Liming Gao
Michael Kubacki
Peter Jones
Pete Batard
Leif Lindholm
Anthony PERARD