REF: https://bugzilla.tianocore.org/show_bug.cgi?id=298
Then this event empty function can be used to remove
the duplication in drivers and other libraries.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=298
Then this event empty function can be used to remove
the duplication in drivers and other libraries.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The latest PiSmmCore driver added several debug messages in the
function SmmAddMemoryRegion in Page.c. The function SmmAddMemoryRegion
is called by the library constructor
PiSmmCoreMemoryAllocationLibConstructor.
When PiSmmCoreMemoryAllocationLibConstructor is executed, the
constructor of DxeHobLib (HobLibConstructor in HobLib.c) is not
executed yet. But platform instance of DebugLib may need get hob
before printing any message. As a result, an ASSERT happens in the
function GetHobList.
The patch is to update GetHobList to get HOB list from system
configuration table when the HOB list is not retrieved and not cached
yet, and HobLibConstructor is also to be updated to just call
GetHobList.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitly return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The OCS value should be initiliazed as 0x0F according to UFS spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The OCS value should be initiliazed as 0x0F according to UFS spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UPIU packet is sent, (BIT0 << Slot) should be set according
to context. But BIT0 is used without Slot when UfsWaitMemSet ()
is invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UPIU packet is sent, (BIT0 << Slot) should be set according
to context. But BIT0 is used without Slot when UfsWaitMemSet ()
is invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UFS_HC_CAP_64ADDR bit is set, it means 64-bit address,
not 32-bit address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Correct the reported by the codespell utility in some files
of PcAtChipsetPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitely return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
if we set a static IP using command
'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0'
The system says 'Failed to set address.' but using
'ifconfig -l', the static IP can be assigned successfully.
so we need to check the gateway validity before setting manual
address to keep the ifconfig -s command more consistent.
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*1. Add IScsiDnsIsConfigured function in IScsiSupported to check
attempt using DNS protocol or not.2. Fix wrongs typos in IScsiDns.c
and .uni file.3. define a macro for the length of target URL.4.
update the Copyright to 2017.
Add DNS support for target URL directly configuration in UI.
Besides, When we enable the option (Get target info via DHCP) ,
the dhcp server will return target info include the rootpath,
like the format
"iscsi:"<servername>":"<protocol>":"<port>":"<LUN>":"<targetname>
According to the RFC 4173,the server name region is expressed as
IPv4(192.168.10.20 )or IPv6 ([2000:bbbb::3]) or domain name,
but currently we only support the IP address format.
To enable this feature, we can support both.
Another enhancement is that we can deal with the data received from
the iSCSI login response with an target redirection status,
in which contains the Target Address in the format
domainname[:port][,portal-group-tag] required by RFC 3720.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=324
Enhance the FileExplorerlib so that user can create a new file/folder
through the UI page.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=342
When user select and enter a directory, File Explorer will update the
form based on the new folders and files in the directory. But when
creating question opcodes, the question id is same with previous one
and this will cause browser to show the highlight menu incorrectly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=323
FileExplorer no need to search load file protocol to show files.
Now remove the codes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345
When I am adding SMBIOS spec 3.1.0 support, I found the decoding
of SMBIOS spec 3.0.0 for some definitions is missing.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344
SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding
of it is missing. I found it when I am adding SMBIOS spec 3.1.0
support.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=311
The patch is also to refine comments of macros PcdToken and PcdTokenEx.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ChooseFile handler, UpdateCAFromFile, has to be EFIAPI or gcc would
use the wrong ABI and cause the crash of the firmware. This commit also
removes the unnecessary type casting in ChooseFile.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This commit introduces a new build option, TLS_ENABLE, to pull in the
TLS-related modules. If HTTP_BOOT_ENABLE and TLS_ENABLE are enabled at
the same time, the HTTP driver locates the TLS protocols automatically
and thus HTTPS is enabled.
To build OVMF with HTTP Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE
To build OVMF with HTTPS Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE -D TLS_ENABLE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Always use IScsiDxe from NetworkPkg when IPv6 is enabled since it provides
the complete ISCSI support.
NOTE: This makes OpenSSL a hard requirement when NETWORK_IP6_ENABLE is
true.
(Based on Jiaxin's suggestion)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This commit provides unconditional library resolutions for the OpenSslLib,
IntrinsicLib and BaseCryptLib classes, regardless of whether those classes
are actually used by any module.
Although those libraries depends on OpenSSL, they won't be built unless
a module really uses them. Thus, missing OpenSSL from the tree won't
cause any build failure as long as SECURE_BOOT_ENABLE is false.
(Based on Jiaxin's patch and Laszlo's suggestion)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Fifo routines from the QuemuFwCfgLib library have been ported
to the new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The IO_PROTOCOL supports Fifo types by invoking the Fifo routines in the
new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The IO_PPI supports Fifo types by invoking the Fifo routines in the
new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The Fifo routines from the UefiCpuPkg/CpuIo2Dxe driver have been
moved to the new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The UefiCpuPkg/CpuIo2Dxe driver and the QemuCfgLib library have duplicate
implementations of I/O Fifo routines. This patch clones the I/O Fifo
routines into the BaseIoLibIntrinsic library and expands the IoLib class
to include the ported I/O Fifo routines.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
While debugging OS for ACPI BGRT support (especially on VMs),
it is very useful to have the EFI firmware to export the
ACPI BGRT table.
This patch tries to add this support in ArmVirtPkg.
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Pass '&Node.Header' instead of '&Node' as the 1st parameter to function
SetDevicePathNodeLength().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
DxeCorePerformanceLib is the performance log manager of PEI and DXE
phase, and it will also produce Performance(Ex) protocol, it should
only support linking with DxeCore.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When we issue 'ifconfig6 -s <interface> auto' system hangs with
an ASSERT in StrLen. in IfConfig6SetInterfaceInfo, for 'auto' case
we added checks to rule out the invalid inputs like 'host', 'gw'
and 'dns'. To parse through this, we do a VarArg = VarArg->Next but
we dont check new VarArg before calling StrCmp. Fix with a check
in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Added decoding of the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add APRIORI file to allow status code related DXE drivers to
be dispatched earlier so that debug message can also be seen
much earlier. With this, lots of DXE driver debug message will
be missing.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Refine the codes to compare the definition 'SIZE_4GB' with type
EFI_PHYSICAL_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The type of return value for function EfiBootManagerFindLoadOption() is
INTN. When checking its return value, it is unnecessary to type cast -1 to
type UINTN.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Star Zeng
Dandan Bi
Thomas Huth
Haojian Zhuang
Zhang Lubo
Gary Lin
Leo Duran
Bhupesh Sharma
Jeff Fan
Hao Wu
Ruiyu Ni
hegdenag
Linson Augustine
Maurice Ma