microvm doesn't support pflash and loads the firmware via -bios,
so we can't use the separate CODE and VARS files. Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
In current TDVF implementation all unaccepted memory passed in Hoblist
are tagged as EFI_RESOURCE_MEMORY_UNACCEPTED. They're all accepted before
they can be accessed. After accepting memory region, the Hob ResourceType
is unchanged (still be EFI_RESOURCE_MEMORY_UNACCEPTED).
TDVF Config-B skip PEI phase and it tries to find a memory region which
is the largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
So we should walk thru the input hoblist and search for the memory region
with the type of EFI_RESOURCE_MEMORY_UNACCEPTED.
Because EFI_RESOURCE_MEMORY_UNACCEPTED has not been officially in PI spec.
So it cannot be defined in MdePkg/Include/Pi/PiHob.h. As a temporary
solution it is defined in Hob.c.
There is a patch-set for lazy-accept very soon. In that patch-set
EFI_RESOURCE_MEMORY_UNACCEPTED will be defined in MdeModulePkg.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
According to GHCI Spec Table 2-1, in TDVMCALL R10 should be cleared
to 0 in input operands, and be checked for the return result.
https://cdrdv2.intel.com/v1/dl/getContent/726790
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The SEV-ES bit of Fn800-001F[EAX] - Bit 3 is used for a host to
determine support for running SEV-ES guests. It should not be checked by
a guest to determine if it is running under SEV-ES. The guest should use
the SEV_STATUS MSR Bit 1 to determine if SEV-ES is enabled. This check
was not part of the original SEV-ES support and was added in
a91b700e38. Removing the check makes this code consistent with the
Linux kernel
Fixes: a91b700e38 ("Ovmf/ResetVector: Simplify and consolidate the SEV features checks")
Signed-off-by: Peter Gonda <pgonda@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
kvm FSB clock is 1GHz, not 100 MHz. Timings are off by factor 10.
Fix all affected build configurations. Not changed: Microvm and
Cloudhw (they have already have the correct value), and Xen (has
no fixed frequency, the PCD is configured at runtime by platform
initialization code).
Fixes: c37cbc030d ("OvmfPkg: Switch timer in build time for OvmfPkg")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In TDX, Application Processor busy-loops on Mailbox for OS to issue
MpProtectedModeWakeupCommandWakeup command to UEFI. As the AP acking to
it, it clears the command member according to ACPI spec 6.4, 5.2.12.19
Multiprocessor Wakeup Structure: "The application processor need clear the
command to Noop(0) as the acknowledgement that the command is received."
However, AsmRelocateApMailBoxLoop wrongly clears WakeupVector. Correctly
clear command instead of WakeupVector.
Without this patch, TD guest kernel fails to boot APs.
Fixes: fae5c1464d ("OvmfPkg: Add TdxDxe driver")
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
The BaseMemEncryptSevLib functionality was updated to rely on the use of
the OVMF/SEV workarea to check for SEV guests. However, this area is only
updated when running the X64 OVMF build, not the hybrid Ia32/X64 build.
Base SEV support is allowed under the Ia32/X64 build, but it now fails
to boot as a result of the change.
Update the ResetVector code to check for SEV features when built for
32-bit mode, not just 64-bit mode (requiring updates to both the Ia32
and Ia32X64 fdf files).
Fixes: f1d1c337e7
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3930
CcProbeLib is designed to check the vm guest type. The OvmfPkg/CcProbeLib
reads the OvmfWorkArea (0x80B000) to get the vm guest type which is
written by each guest (SEV or TDX guest). But in SMM drivers the access
to OvmfWorkArea is illegal. PiSmmCpuDxeSmm.inf is an example. It uses
IoLib which in OvmfPkgX64 BaseIoLibIntrinsicSev.inf is included. The
IoLib probes if the working guest is td guest by calling CcProbe().
So CcProbeLibNull will be included when SMM_REQUIRE is set. Currently
only TDVF uses CcProbe to check the guest type, and TDVF doesn't
support SMM, so this fix has no side-effect.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds an instance of VariableFlashInfoLib to the platform build as
it is a new library class introduced in MdeModulePkg.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
In OvmfPkgX64 we enable 2 different CpuMpPei and CpuDxe drivers. The
difference between the drivers is the MpInitLib or MpInitLibUp. This is
acomplished by adding a MpInitLibDepLib.
In IntelTdxX64 we enable 2 versions of CpuDxe drivers. It is because PEI
is skipped in IntelTdxX64.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
In Td guest CpuDxe driver uses the MpInitLibUp, the other guest type
use the MpInitLib. So we install different Protocols according to
the current working guest type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
Td guest should use MpInitLibUp, other guest use the MpInitLib. So
in SecMain.c different PPI is installed according to the working
guest type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
There are 4 MpInitLibDepLib:
- PeiMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- PeiMpInitLibUpDepLib:
MpInitLib unique-processor dependency
- DxeMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- DxeMpInitLibUpDepLib
MpInitLib unique-processor dependency
The Pei libs depend on the corresponding PPI. The Dxe libs depend on the
corresponding Protocol.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
MpInitLibDepLib is a set of libraries which depend on PPI/Protocol.
This patch defines the related PPI/Protocols in OvmfPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
QemuFwCfg is much more powerful than BhyveFwCtl. Sadly, BhyveFwCtl
decided to use the same IO ports as QemuFwCfg. It's not possible to use
both interfaces simultaneously. So, prefer QemuFwCfg over BhyveFwCtl.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Was dropped by accident.
Fixes: b47575801e ("OvmfPkg: move tcg configuration to dsc and fdf include files")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Try query native display resolution from the host. When successful,
setup PcdVideoHorizontalResolution and PcdVideoVerticalResolution
accordingly and add the video mode to the GOP mode list if needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add new function to initialize the GOP, move over setup code. Handle
initialization first, specifically before calling GopQueryMode(), so
GopQueryMode is never called before GopInitialize() did complete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Call GopQueryMode() in GopSetMode(), use the ModeInfo returned when
setting the mode. This is needed to properly handle modes which are
not on the static mGopResolutions list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Extend VirtioGpuSendCommand() to support commands which return data,
rename the function to VirtioGpuSendCommandWithReply() to indicate that.
Add a new VirtioGpuSendCommand() function which is just a thin wrapper
around VirtioGpuSendCommandWithReply() so existing code continues to
work without changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
ConSplitterDxe will pick the highest available resolution then,
thereby making better use of the available display space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3904
TdxDxe driver is introduced for Intel TDX feature. Unfortunately, this
driver also breaks boot process in SEV-ES guest. The root cause is in
the PciLib which is imported by TdxDxe driver.
In a SEV-ES guest the AmdSevDxe driver performs a
MemEncryptSevClearMmioPageEncMask() call against the
PcdPciExpressBaseAddress range to mark it shared/unencrypted. However,
the TdxDxe driver is loaded before the AmdSevDxe driver, and the PciLib
in TdxDxe is DxePciLibI440FxQ35 which will access the
PcdPciExpressBaseAddress range. Since the range has not been marked
shared/unencrypted, the #VC handler terminates the guest for trying to
do MMIO to an encrypted region.
Adjusting the load sequence of TdxDxe and AmdSevDxe can fix the issue.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
SEV-Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
TDX-Tested-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
TdIsEnabled() uses the CPUID instruction. At this point, exception
handling is not established and a CPUID instruction will generate
a #VC and cause the booting guest to crash.
CcProbe() checks Ovmf work area to return the guest type. So call
of CcProbe() instead of TdIsEnabled() to fix the above issue.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
CcProbeLib is imported in BaseIoLibIntrinsicSev.
OvmfPkg/Library/CcProbeLib is the OvmfPkg version which checks
OvmfWorkArea to return the Cc guest type. It is included
in OvmfPkgX64.dsc and IntelTdx/IntelTdxX64.dsc.
Other .dsc include the MdePkg/Library/CcProbeLibNull because Cc guest
is not supported in those projects.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
This is the OvmfPkg specific CcProbeLib. It checks the Ovmf WorkArea
(PcdOvmfWorkAreaBase) to return the guest type.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
Replace GUEST_TYPE with CC_GUEST_TYPE which is defined in
MdePkg/Include/ConfidentialComputingGuestAttr.h.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3875
The following files:
OvmfPkg/Bhyve/BhyveRfbDxe/VbeShim.h
OvmfPkg/QemuVideoDxe/VbeShim.h
Are auto generated by the following generators:
OvmfPkg/Bhyve/BhyveRfbDxe/VbeShim.sh
OvmfPkg/QemuVideoDxe/VbeShim.sh
Therefore, Uncrustify causes a file update to produce a very large
diff due to formatting changes.
This change does the following:
1. Reverts the Uncrustify changes applied to the files in commit
ac0a286f4d.
2. Uses a new UncrustifyCheck CI plugin configuration option to
exclude the files from future formatting checks.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF? https://bugzilla.tianocore.org/show_bug.cgi?id=3861
UefiCpuPkg define a new Protocol with the new services
SmmWaitForAllProcessor(), which can be used by SMI handler
to optionally wait for other APs to complete SMM rendezvous in
relaxed AP mode.
VariableSmm driver need use SmmCpuRendezvousLib, So add
SmmCpuRendezvousLib in OvmfPkg.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
There are 2 configurations for TDVF to upstream. See below link for
the definitions of the 2 configurations.
https://edk2.groups.io/g/devel/message/76367
This patch-set is to enable the basic feature of Config-B in OvmfPkg.
- Add a standalone IntelTdxX64.dsc to a TDX specific directory for a
*full* feature TDVF. (Align with existing SEV)
- IntelTdx.dsc includes Tdx/Legacy OVMF basic boot capability. The
final binary can run on Tdx/Legacy OVMF.
- PEI phase is skipped.
By design in Config-B there should be more advanced features, such as:
- RTMR based measurement and measure boot.
- Remove unnecessary drivers to reduce attack surface, such as
network stack.
To make the code review more efficiency, Config-B is split into 2 waves:
- Basic feature of Config-B
- Advanced feature of Config-B
This patch contains 2 files (IntelTdxX64.dsc/IntelTdxX64.fdf) which
enable the basic feature of Config-B. In the waves of Advanced feature
of Config-B, we will re-visit these 2 files.
TDX_PEI_LESS_BOOT is defined in IntelTdxX64.dsc to indicate it boots up
without PEI phase.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Host VMM may inject OptionRom which is untrusted in Td guest. So PCI
OptionRom needs to be ignored if it is Td guest. According to
"Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage"
PI spec 1.7, type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
MMIO64_PREFERENCE is a fixed length data structure which contains one
AddressSpaceDesc and one EndDesc. This patch removes MMIO64_PREFERENCE
and create AddressSpaceDesc and EndDesc respectively. This change
gives the chance to add more AddressSpaceDesc when CheckDevice is
called.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The entrypoint of DxeAcpiTimerLib checks HostBridgeDevId by reading
PcdOvmfHostBridgePciDevId. If the DevId is not set, ASSERT is
triggered. Normally this DevId is set in PlatformPei which is executed
in PEI phase.
This patch-set is introducing PEI-less boot which means PEI phase is
skipped. So there is no chance to set this DevId. Instead HostBridgeDevId
is set in PlatformInfoHob. So we can check if PlatformInfoHob exists and
if HostBridgeDevId is set in this Hob.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
TDX_PEI_LESS_BOOT indicates the boot without PEI phase. In this case
settings in EFI_HOB_PLATFORM_INFO should be set to its according PCDs.
TdxDxe driver is workable for both Legacy guest and Tdx guest. It is
because for Legacy guest (in PEI-less boot) there should be a place
to set the PCDs based on EFI_HOB_PLATFORM_INFO hob. TdxDxe driver is
the right place to do this work.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
OvmfPkg/IntelTdx/Sec is a simplied version of OvmfPkg/Sec. There
are below differences between these 2 Sec
- IntelTdx/Sec only supports Legacy guest and Tdx guest in X64.
- IntelTdx/Sec calls PeilessStartup () to jump from SEC to DXE directly.
- IntelTdx/Sec uses MemoryAllocationLib / HobLib / PrePiLib in
EmbeddedPkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
PeilessStarupLib provides a function (PeilessStartup) which brings
up both Legacy and Tdx guest from SEC phase to DXE phase. PEI phase
is skipped so that the attack surfaces are reduced as much as possible.
PeilessStartup() does below tasks:
1. Contruct the FW hoblist.
Since PEI is skipped, we must find a memory region which is the
largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
2. Initialize the platform.
3. Build various Hobs, such as SecFv Hob, DxeFv Hob, Stack Hob, etc.
4. At last DXE Core is located / loaded and transfer control to it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
This library sets / gets the Hob list pointer in TDX_WORK_AREA.
This is because it is designed to be used in SEC where the value of
global variable cannot be saved, so the Hob list pointer is saved
in TDX_WORK_AREA.
TDX_WORK_AREA shares the same base address as SEV_WORK_AREA which is
pointed by PcdSevEsWorkAreaBase. This PCD will be renamed to
PcdCcWorkAreaBase as Gerd suggested.
See https://edk2.groups.io/g/devel/message/86642
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Add the TDX work area definition.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3711
Discussion in https://bugzilla.tianocore.org/show_bug.cgi?id=1496 shows
that 8254TimerDxe was not written for OVMF. It was moved over from
PcAtChipsetPkg to OvmfPkg in 2019. Probably because OVMF was the only
user left.
Most likely the reason OVMF used 8254TimerDxe initially was that it could
just use the existing driver in PcAtChipsetPkg. And it simply hasn't
been changed ever.
CSM support was moved in 2019 too. (CSM support depends on 8254/8259
drivers). So 8254TimerDxe will be used when CSM_ENABLE=TRUE.
There are 4 .dsc which include the 8254Timer.
- OvmfPkg/AmdSev/AmdSevX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
For the three OvmfPkg* configs using 8254TimerDxe with CSM_ENABLE=TRUE
and LapicTimerDxe otherwise.
For the AmdSev config it doesn't make sense to support a CSM. So use
the lapic timer unconditionally.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Gerd Hoffmann
Min Xu
Peter Gonda
Theo Jehl
Isaku Yamahata
Tom Lendacky
Michael Kubacki
Rebecca Cran
Yu Pu
Corvin Köhne
Zhihao Li