Add a new cert data base "certdbv" to store signer certs for volatile time based
Auth variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19786 6f19259b-4bc3-4df7-8a09-765794883524
1) NvPublic.dataSize data should be got from original
receive buffer, instead of returned NvPublic.
2) NvNameSize means the size of NvName without size field.
The original code treats it to be size of NvName with size
field, so the last 2 bytes are missing.
This patch fixed problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19756 6f19259b-4bc3-4df7-8a09-765794883524
Previously, we only add PTP detection in Tpm12RequestUseTpm,
because RequestUseTpm does not check TPM command.
This patch also adds similar check in Tpm12SubmitCommand.
PTP device does not accept TPM12 command, so that it can
return error on PTP device, instead of wait till timeout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19755 6f19259b-4bc3-4df7-8a09-765794883524
This patch add PTP CRB support in BIOS Setup.
It can:
1) Display the PTP capability (TIS/FIFO/CRB)
2) Display the PTP current interface (TIS/FIFO/CRB)
3) Let user select CRB/FIFO, if supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19743 6f19259b-4bc3-4df7-8a09-765794883524
The TPM RequestUseTpm API can only set register to
use the hardware, but it can not be used to distinguish
TPM12 or TPM2 device.
TPM PTP defines same address with TIS, so we need
detect the TPM device is PTP or TIS in RequestUseTpm.
Also, Tcg2Config driver call RequestUseTpm to detect
TPM hardware device. So we have to add check here.
There is no need to support PTP CRB style SubmitCommand(),
because TPM2 device can not accept TPM12 style command.
This patch also uses TpmTis.h instead of duplicate
definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19742 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original ACPI table only
handles PTP FIFO/TIS interface. This patch adds
PTP CRB interface support.
The current logic is that SMM driver will runtime
detect TPM device interface (CRB or FIFO/TIS) and
publish TPM2 table based on result.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19741 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original lib only handles
PTP FIFO/TIS interface. This patch adds PTP CRB
interface support.
The current logic is that lib will runtime detect
TPM device interface (CRB or FIFO/TIS) and call
proper function to access hardware.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19740 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19729 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19728 6f19259b-4bc3-4df7-8a09-765794883524
Add the following APIs that are required by TcgPei and/or TcgDxe to
the Tpm12CommandLib instance:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19727 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19725 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19724 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19723 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19722 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19721 6f19259b-4bc3-4df7-8a09-765794883524
This module only handles MOR lock v1.
Now MOR lock V2 solution is published and added in variable driver. So this module can be deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19691 6f19259b-4bc3-4df7-8a09-765794883524
This patch updated final event log calculation based on
TCG EFI PROTOCOL rev9, 7.1.2 "All options implementation".
The previous logic is to save event to final event log
once GetEventLog() is called. 7.1.1 shows that we should
save event log to both normal even log area and final event
log area after GetEventLog() is called.
And there is no need to record TCG12 format log to final
event log area, and normal event log area can be BootServices
memory because OS will not access it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19661 6f19259b-4bc3-4df7-8a09-765794883524
Previously, NumberOfPCRBanks is calculated based on TPM
capability. However, there might be a case that TPM hardware
support 1 algorithm, but BIOS does not support and BIOS
mask it via PCD. This causes the conflict between
HashAlgorithmBitmap and NumberOfPCRBanks.
So we move the NumberOfPCRBanks calculation based on
HashAlgorithmBitmap to make sure the data is consistent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19660 6f19259b-4bc3-4df7-8a09-765794883524
ExtractConfig is called many times, so it's not efficient to update Secure Boot STR_SECURE_BOOT_STATE_CONTENT, STR_CUR_SECURE_BOOT_MODE_CONTENT string in ExtractConfig.
As these 2 strings are displayed on one form, always update them when opening the form.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19645 6f19259b-4bc3-4df7-8a09-765794883524
TCG event log and TCG2 final event log area length can be configurable to meet platform event log
requirement.
PcdTcgLogAreaMinLen : 0x10000 based on minimum requirement in TCG ACPI Spec 00.37
PcdTcg2FinalLogAreaLen : 0x8000 based on experience value
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19639 6f19259b-4bc3-4df7-8a09-765794883524
Some commands in Tpm2CommandLib accept AuthSession
as input parameter and copy to local command buffer.
After use, this AuthSession content should be zeroed,
because there might be some secrete there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19635 6f19259b-4bc3-4df7-8a09-765794883524
Tpm2Startup does not check TPM device return code.
It might cause problem, that error is not detected
in Tcg2Peim, for example, S3 resume case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19634 6f19259b-4bc3-4df7-8a09-765794883524
The official TCG standard uses Tcg2Protocol, instead of TrEE.
We should update TCG driver to use Tcg2Protocol, too.
TrEE should be used only for old TrEE implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19633 6f19259b-4bc3-4df7-8a09-765794883524
Change TisTpmCommand to Tpm2TisTpmCommand. Makes function name more clear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19622 6f19259b-4bc3-4df7-8a09-765794883524
Debug messages are using a format strings with %s for
a Unicode string, but the strings being printed are
ASCII strings and this results in corrupted debug
messages. Change the the format string to use %a
instead of %s.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19617 6f19259b-4bc3-4df7-8a09-765794883524
Add SecureBoot UI support for Customized SecureBoot Mode transition according to Mantis 1263. User can do secure boot mode transition through UI.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19134 6f19259b-4bc3-4df7-8a09-765794883524
Add gEdkiiSecureBootModeGuid definition for Enable Secure Boot feature defined in
UEFI2.5 Mantis 1263. It is a private variable GUID.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19132 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (like RVCT) reject input files that do not end in a
newline. So add missing newlines to some SecurityPkg header files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19107 6f19259b-4bc3-4df7-8a09-765794883524
If TPM2_Startup(TPM_SU_STATE) to return an error, the system
firmware that resumes from S3 MUST deal with a TPM2_Startup
error appropriately.
For example, issuing a TPM2_Startup(TPM_SU_CLEAR) command and
configuring the device securely by taking actions like extending
a separator with an error digest (0x01) into PCRs 0 through 7.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18760 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
Previous TCG2 configuration UI always add all TCG defined hash algorithm to let user select which one need be used.
This brings risk that user might select unsupported hash, and selection is rejected later.
So we enhance to UI to hide unsupported hash algorithm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18676 6f19259b-4bc3-4df7-8a09-765794883524
This issue causes section extraction overrun and possible hang due to bad output size calculation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Cohen, Eugene" <eugene@hp.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18625 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
PcdTpmInitializationPolicy/PcdTcg2HashAlgorithmBitmap/PcdTpm2HashMask/PcdTpmInstanceGuid all have set operation in PEI phase,
PEI phase does not allow DynamicHii PCD set, so DynamicDefault is expected for them and use PcdSet##S to instead of PcdSet## and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18614 6f19259b-4bc3-4df7-8a09-765794883524
Chao Zhang
Yao, Jiewen
Michael Kinney
Hao Wu
Samer El-Haj-Mahmoud
Star Zeng
Eric Dong
Liming Gao
Jordan Justen
Ard Biesheuvel
Cohen, Eugene