2. Update Dhcp4 and Mtftp4 driver to adopt the combined UdpIo.
3. Clean up coding style problems in combined IpIoLib/NetLib. Update Tcp4 and Udp4 to adopt the changes.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9382 6f19259b-4bc3-4df7-8a09-765794883524
1. Add new interface Ip6IsValidUnicast
2. Add new enum IP6_EXTENSION_HEADER_TYPE
3. Add new structure IP6_ICMP_* definitions
4. Update structure from EFI_UDP4_HEADER to EFI_UDP_HEADER
5. Add new macro EFI_IP6_EQUAL
IpIoLib:
1. Update the IpIoLib to a combined library for both v4 and v6 network stack
2. Fix a bug in IpIoIcmpHandler() - for IPv6 packet, the header length is variable (basic header + extension) rathar than fixed length.
The fix removes the IPv6 header fields and notify the user with the ICMPv6 packet only containing payload.
TcpDxe/UdpDxe:
1. Update to adapt the new combined IpIoLib
2. Add gEfiIp6ProtocolGuid/gEfiIp6ServiceBindingProtocolGuid to [Protocols] in INF file since the Ip6.h is included in IpIoLib and NetLib.
3. Pass the TCP4/UDP4 UEFI SCT test on NT32 platform.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9374 6f19259b-4bc3-4df7-8a09-765794883524
With this update, SendForm() could support formset class GUID other than EFI_HII_PLATFORM_SETUP_FORMSET_GUID, for example, the EFI_HII_DRIVER_HEALTH_FORMSET_GUID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9369 6f19259b-4bc3-4df7-8a09-765794883524
Note: with this update, the limitation for "OrderedList should use array of data type UINT8 as its storage" is removed; now OrderedList could use any data type (UINT8/UINT16/UINT32/UINT64) as its storage array.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9360 6f19259b-4bc3-4df7-8a09-765794883524
The old behavior is: if press ESC, it will exit the whole Formset.
The new behavior is: if press ESC, it will return to the parent Form; if current Form is the root Form of a FormSet, it will exit the whole FormSet.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9359 6f19259b-4bc3-4df7-8a09-765794883524
2. Sync HSD #210249 patch: Fix bug in handling certain network errors in EfiDhcp4TransmitReceive() for DHCP4 driver
3. Enhance DhcpCleanLease to clear Netmask as well, so that Dhcp4->GetModeData() could return clean data in Dhcp4Stopped state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9354 6f19259b-4bc3-4df7-8a09-765794883524
a. Update PciBusDxe module, and move it from IntelFrameworkModulePkg to MdeModulePkg
b. Move IncompatiblePciDeviceSupportDxe module from IntelFrameworkModulePkg to MdeModulePkg
c. Update the related consumes in inf/dsc/fdf
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9347 6f19259b-4bc3-4df7-8a09-765794883524
Increase the value of USB_GENERAL_DEVICE_REQUEST_TIMEOUT from
50 milliseconds to 100 milliseconds. This provides a work around
for slower USB hubs and devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9330 6f19259b-4bc3-4df7-8a09-765794883524
PcdFlashNvStorageFtwWorkingBase and PcdFlashNvStorageFtwSpareBase are
now updated each time an FVB instance is installed. This allows the
PCDs to be set at runtime at any time before the FVB is installed.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9312 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
a. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
b. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
2. roll back serial drivers not to create child device, if the device speicifed by remainingdevicepath cannot find in the created devices list.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9267 6f19259b-4bc3-4df7-8a09-765794883524
a. Add check validation of RemainingDevicePath in Supported()
b. In Star() function, if RemaingDevicePath is the End of Device Path Node, don't create child device and return EFI_SUCCESS.
2. fixed one device path issue in ScsiBus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9264 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
Add PcdEmuVariableNvStoreReserved which allows a platform to declare a
memory address for the EMU Variable driver to use for the NV variable
store. The EMU Variable driver will look to see if the contents of
this memory range appear to be a valid variable store, and if so
the EMU driver will use the variables.
If a platform can preserve a memory range across system resets, this
feature can allow the EMU Variable driver's NV variable store to be
preserved across a system reset.
In the default case this PCD will be set as a fixed PCD with a value
of 0. In this case this new feature should have minimal impact on
the EMU Variable driver. (Perhaps a slight increase in code size,
but no functional difference is expected.)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9240 6f19259b-4bc3-4df7-8a09-765794883524
tye
vanjeff
mdkinney
lgao4
xdu2
jchen20
davidhuang
jljusten
eric_tian
qhuang8