Commit Graph

27501 Commits

Author SHA1 Message Date
Liran Alon b654edec03 OvmfPkg/PvScsiDxe: Setup requests and completions rings
These rings are shared memory buffers between host and device in which
a cyclic buffer is managed to send request descriptors from host to
device and receive completion descriptors from device to host.

Note that because device may be constrained by IOMMU or guest may be run
under AMD SEV, we make sure to map these rings to device by using
PciIo->Map().

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-14-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-30 16:45:07 +00:00
Liran Alon 5269c26e07 OvmfPkg/PvScsiDxe: Reset adapter on init
The following commits will complete the implementation of
device initialization.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-13-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 447e5d3902 OvmfPkg/PvScsiDxe: Define device interface structures and constants
These definitions will be used by the following commits to complete the
implementation of PVSCSI device driver.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-12-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 6672b3cff2 OvmfPkg/PvScsiDxe: Enable MMIO-Space & Bus-Mastering in PCI attributes
Enable MMIO-Space & Bus-Mastering PCI attributes when device is started.
Note that original PCI attributes are restored when device is stopped.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-11-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 45098e8a9a OvmfPkg/PvScsiDxe: Backup/Restore PCI attributes on Init/UnInit
This commit doesn't change semantics.
It is done as a preparation for future commits which will modify
PCI attributes.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-10-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon c08eaaaf37 OvmfPkg/PvScsiDxe: Open PciIo protocol for later use
This will give us an exclusive access to the PciIo of this device
after it was started and until it will be stopped.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-9-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 9c2d8281af OvmfPkg/PvScsiDxe: Translate Target & LUN to/from DevicePath
Implement EXT_SCSI_PASS_THRU.BuildDevicePath() and
EXT_SCSI_PASS_THRU.GetTargetLun().

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-8-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 7efce2e59c OvmfPkg/PvScsiDxe: Report the number of targets and LUNs
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().

ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon e497432c2c OvmfPkg/PvScsiDxe: Install stubbed EXT_SCSI_PASS_THRU
Support dynamic insertion and removal of the protocol.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-6-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon a9f9d5cf56 OvmfPkg/PvScsiDxe: Probe PCI devices and look for PvScsi
PvScsiControllerSupported() is called on handles passed in
by the ConnectController() boot service and if the handle is the
PVSCSI controller, the function would return success. A success
return value will attach our driver to the device.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-5-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 419b30d642 OvmfPkg/PvScsiDxe: Report name of driver
Install Component Name protocols to have a nice display name for the
driver in places such as UEFI shell.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-4-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon ed08c57113 OvmfPkg/PvScsiDxe: Install DriverBinding protocol
In order to probe and connect to the PvScsi device we need this
protocol. Currently it does nothing.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-3-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Liran Alon 478c07d483 OvmfPkg/PvScsiDxe: Create empty driver
In preparation for support booting from PvScsi devices, create a
basic scaffolding for a driver.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-2-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
2020-03-30 16:45:07 +00:00
Pete Batard 6c1fb56802 EmbeddedPkg/AcpiLib: add GICC table init macro for ACPI 6.3
ACPI 6.3 added a 16-bit SPE overflow Interrupt field, replacing
2 of the 3 reserved bytes that are defined at the end of the
GICC structure for 6.0.

Add a new macro to initialise the new field.

Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2020-03-30 14:48:59 +00:00
Maciej Rabeda 9c20342eed NetworkPkg/Ip6Dxe: Improve Neightbor Discovery message validation.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2174

Problem has been identified with Ip6ProcessRouterAdvertise() when
Router Advertise packet contains options with malicious/invalid
'Length' field. This can lead to platform entering infinite loop
when processing options from that packet.

Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
2020-03-30 13:13:29 +00:00
Ard Biesheuvel 3000c2963d OvmfPkg/GenericQemuLoadImageLib: Fix VS2019 UINT32 conversion error
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:

  d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
    error C2220: the following warning is treated as an error
  d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
    warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data

Suppress the error by making the cast explicit.

Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-30 12:05:28 +00:00
GuoMinJ d4e2909bfc MdeModulePkg: Remove gEfiFormBrowserExProtocolGuid Protocol Guid
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2145

Replace the gEfiFormBrowserExProtocolGuid with
gEdkiiFormBrowserExProtocolGuid, remove the unnecessary declaration.

Signed-off-by: GuoMinJ <newexplorerj@gmail.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
2020-03-30 01:13:49 +00:00
Sami Mujawar d671d1fa48 DynamicTablesPkg: Option for VS2017 static code analysis
Add build option STATIC_ANALYSIS to enable VS2017 static
code analysis.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 5650f307b3 DynamicTablesPkg: Remove erroneous use of EFIAPI
The Dynamic Tables Factory protocol has an erroneous
EFIAPI calling convention macro in the function
pointer declaration.

Remove the erroneous EFIAPI calling convention macro
from the interface declarations.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 4d23a7ec84 DynamicTablesPkg: PPTT: Fix uninitialized memory usage
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.

This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 4817953949 DynamicTablesPkg: IORT: Fix uninitialized memory usage
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.

This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 8b2ac43bd8 DynamicTablesPkg: Fix IORT node length assignment
The VS2017 compiler reports 'warning C4267: 'return': conversion
from 'size_t' to 'UINT32', possible loss of data' for a number of
functions that compute the IORT node length. Similarly, it reports
warnings for IORT node length field assignments as the length
field is 16-bit wide.

This patch adds type casts at appropriate places and also implements
validations to ensure that the max width of the respective fields
is not exceeded.

This patch also fixes a typo in one of the local variable names.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar effddeea39 DynamicTablesPkg: Remove redundant frame count check
Removing GT Block frame count check from AddGTBlockTimerFrames()
as this is already validated in BuildGtdtTable().

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 7c10e8abb6 DynamicTablesPkg: Serial debug port initialisation
The ARM DCC serial port subtype is an option that is
supported by the DBG2 generator. However, the serial
port initialisation should only be done for PL011/SBSA
compatible UARTs.

Add check to conditionally initialise the serial port.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar d39271f114 DynamicTablesPkg: Fix unaligned pointers usage
The VS2017 compiler reports 'warning C4366: The result of
the unary '&' operator may be unaligned' if an address of
an unaligned structure member is passed as an argument to
a function.

Fix this warning by using local variables in place of
unaligned structure members.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 90e52483bf DynamicTablesPkg: Fix ACPI table rev field width
The VS2017 compiler reports 'warning C4244: '=': conversion from
'const UINT32' to 'UINT8', possible loss of data' when the ACPI
table revision field is being updated.

The width of the revision field in the EFI_ACPI_DESCRIPTION_HEADER
struct is 8-bit wide. Therefore, to fix the above warning make the
ACPI Table revision field usage 8-bit wide across Dynamic Tables
Framework.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar aa9aff2d4e DynamicTablesPkg: Fix Boot arch flag width
The ArmBootArch field of the FADT table is 16-bit wide. The
VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT16', possible loss of data' when assigning the
CM_ARM_BOOT_ARCH_INFO.BootArchFlags value as the width of this
field in CM_ARM_BOOT_ARCH_INFO is 32-bit wide.

To fix this warning, update the CM_ARM_BOOT_ARCH_INFO struct
to make the  BootArchFlags field 16-bit wide. This also makes
it compatible with the ACPI FADT specification.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 878478116a DynamicTablesPkg: Fix GT Block length assignment
The VS2017 compiler reports 'warning C4267: '=': conversion from
'size_t' to 'UINT16', possible loss of data'.

The sizeof() operator is used to calculate the size of the
GT Block structure. The length field in the GT Block structure
is 16-bit wide. Since the return type of sizeof() operator
is size_t the VS2017 compiler reports the above warning.

To fix the warning, an explicit type cast is added. An additional
check is also performed to ensure that the calculated GT Block
length does not exceed MAX_UINT16.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 96bb6704e0 DynamicTablesPkg: Fix Proc node length assignment
The length field for the Processor Hierarchy node structure is
8-bit wide while the number of private resource field is 32-bit
wide. Therefore, the GetProcHierarchyNodeSize() returns the size
as a 32-bit value.

The VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT8', possible loss of data' while assigning the
length field of the Processor Hierarchy node structure.

To fix this, a type cast is added. In addition, there is a check
to ensure that the Processor Hierarchy node size does not exceed
MAX_UINT8.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 869f234140 DynamicTablesPkg: Fix serial port subtype warning
The VS2017 compiler reports 'warning C4244: '=': conversion
from 'UINT16' to 'UINT8', possible loss of data' for the
SPCR InterfaceType field assignment.

The SPCR InterfaceType field uses the same encoding as that
of the DBG2 table Port Subtype field. However SPCR.InterfaceType
is 8-bit while the Port Subtype field in DBG2 table is 16-bit.

Since the Configuration Manager represents the Serial port
information using the struct CM_ARM_SERIAL_PORT_INFO, the
PortSubtype member in this struct is 16-bit.

To fix the warning an explicit type case is added. A validation
is also added to ensure that the Serial Port Subtype value
provided by the Configuration Manager is within the 8-bit
range (less than 256).

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 3e025c7742 DynamicTablesPkg: Remove struct CM_ARM_CPU_INFO
The VS2017 compiler reports 'error C2016: C requires that
a struct or union has at least one member' for the struct
CM_ARM_CPU_INFO.

Remove struct CM_ARM_CPU_INFO as this is not in use.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar f291a581ac DynamicTablesPkg: Fix missing local header warning
The edk2 BaseTools report a warning if a local header file
is not listed under the [Sources] section in the INF file.

Add header files to the [Sources] section in the respective
INF files to fix the warnings.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2020-03-29 16:53:35 +00:00
Sami Mujawar 43a0e08d02 DynamicTablesPkg: Fix entry point param definition
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the Generator modules. VS2017 compiler also
reports similar warnings for the DXE entry points.

Remove the CONST qualifier for the SystemTable pointer (the
second parameter to the constructor/destructor/DXE Entry
point) to make it compatible with the formal declaration.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-29 16:53:35 +00:00
Jian J Wang 6e9bd495b3 SecurityPkg: add null version of VariableKeyLib
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2594

Add null version of VariableKeyLib instance. The full version should be
provided by platforms which supports key generator.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Nishant C Mistry <nishant.c.mistry@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
2020-03-27 16:41:05 +00:00
Jian J Wang d21c2cd082 SecurityPkg: add null version of RpmcLib
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2594

Add null version of RpmcLib instance. The full version should be provided
by platform which supports RPMC device.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Nishant C Mistry <nishant.c.mistry@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2020-03-27 16:41:05 +00:00
Jian J Wang 5042ee43d9 SecurityPkg: add RpmcLib and VariableKeyLib public headers
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2594

RpmcLib.h and VariableKeyLib.h are header files required to access RPMC
device and Key generator from platform. They will be used to ensure the
integrity and confidentiality of NV variables.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Nishant C Mistry <nishant.c.mistry@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2020-03-27 16:41:05 +00:00
GuoMinJ 4ac82ea1e1 UefiCpuPkg/MpInitLib: Add out attribute for parameter.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2553

The comment haven't indicate the output attribute.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-27 02:20:02 +00:00
Guomin Jiang 381f8ef6a1 UnitTestFrameworkPkg/ResultReportLib: Remove invalid index string indicator
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2535

The UNIT_TEST_STATUS and FAILURE_TYPE have used 0 as status, so use 0 as
unknown is confused, remove it from array enumeration but keep it
location in the array.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-03-27 02:03:41 +00:00
GuoMinJ 5bc09cf05a UnitTestFrameworkPkg/UnitTestLib: Check Suite pointer before use.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2530

The Suite pointer is used before check if it is valid,
correct it to check the validation before use.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-03-27 02:03:41 +00:00
Guomin Jiang 090e267b5b MdePkg/UnitTestBaseLib: Add check for pointer BinData
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2531

AllocatePool may fail and BinData may be invalid, check it before use.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-03-27 02:03:41 +00:00
Guomin Jiang 695d90b9b1 MdeModulePkg/SdDxe: Check the Token to avoid null pointer
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2286

Token pointer may be NULL, it should be checked before use it.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
2020-03-27 01:04:25 +00:00
Hao A Wu a1c35ff312 UefiCpuPkg/MpInitLib DXE: Add PCD to control AP status check interval
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2627

The commit will introduce a static PCD to specify the periodic interval
for checking the AP status when MP services StartupAllAPs() and
StartupThisAP() are being executed in a non-blocking manner. Or in other
words, specifies the interval for callback function CheckApsStatus().

The purpose is to provide the platform owners with the ability to choose
the proper interval value to trigger CheckApsStatus() according to:
A) The number of processors in the system;
B) How MP services (StartupAllAPs & StartupThisAP) being used.

Setting the PCD to a small value means the AP status check callback will
be triggered more frequently, it can benefit the performance for the case
when the BSP uses WaitForEvent() or uses CheckEvent() in a loop to wait
for AP(s) to complete the task, especially when the task can be finished
considerably fast on AP(s).

An example is within function CpuFeaturesInitialize() under
UefiCpuPkg/Library/RegisterCpuFeaturesLib/DxeRegisterCpuFeaturesLib.c,
where BSP will perform the same task with APs and requires all the
processors to finish the task before BSP proceeds to its next task.

Setting the PCD to a big value, on the other hand, can reduce the impact
on BSP by the time being consumed in CheckApsStatus(), especially when the
number of processors is huge so that the time consumed in CheckApsStatus()
is not negligible.

The type of the PCD is UINT32, which means the maximum possible interval
value can be set to:
4,294,967,295 microseconds = 4,295 seconds = 71.58 minutes = 1.19 hours
which should be sufficient for usage.

For least impact, the default value of the new PCD will be the same with
the current interval value. It will be set to 100,000 microseconds, which
is 100 milliseconds.

Unitest done:
A) OS boot successfully;
B) Use debug message to confirm the 'TriggerTime' parameter for the
   'SetTimer' service is the same before & after this patch.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brian J. Johnson <brian.johnson@hpe.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-27 00:46:39 +00:00
Gaurav Jain 32bcdfa512 EmbeddedPkg/RealTimeClockRuntimeDxe: Drop ASSERTs on function arguments
ASSERT in SetTime_Conf Consistency Test.
SCT Test expect return as Invalid Parameter.
So removed ASSERT().

While at it, check that the NanoSecond field is within the range given
by the UEFI specification.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2020-03-26 18:39:01 +00:00
Sami Mujawar 5f7c91f0d7 DynamicTablesPkg: Update FADT generator to ACPI 6.3
Update FADT table generator to support ACPI revision 6.3

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2020-03-26 17:48:44 +00:00
Ard Biesheuvel f7079d1bc1 ArmPkg/ArmMmuLib AARCH64: preserve attributes when replacing a table entry
Currently, depending on the size of the region being (re)mapped, the
page table manipulation code may replace a table entry with a block entry,
even if the existing table entry uses different mapping attributes to
describe different parts of the region it covers. This is undesirable, and
instead, we should avoid doing so unless we are disregarding the original
attributes anyway. And if we make such a replacement, we should free all
the page tables that have become orphaned in the process.

So let's implement this, by taking the table entry path through the code
for block sized regions if a table entry already exists, and the clear
mask is set (which means we are preserving attributes from the existing
mapping). And when we do replace a table entry with a block entry, free
all the pages that are no longer referenced.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
2020-03-26 10:34:14 +00:00
Ard Biesheuvel 5fc899535e ArmPkg/ArmMmuLib AARCH64: use helpers to determine table entry types
Given how the meaning of the attribute bits for page table entry types
is slightly awkward, and changes between levels, add some helpers to
abstract from this.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
2020-03-26 10:34:14 +00:00
Ard Biesheuvel d390920ed4 ArmPkg/ArmMmuLib AARCH64: limit recursion when freeing page tables
FreePageTablesRecursive () traverses the page table tree depth first
to free all pages that it finds, without taking into account the
level at which it is operating.

Since TT_TYPE_TABLE_ENTRY aliases TT_TYPE_BLOCK_ENTRY_LEVEL3, we cannot
distinguish table entries from block entries unless we take the level
into account, and so we may be dereferencing garbage if we happen to
try and free a hierarchy of page tables that has level 3 pages in it.

Let's fix this by passing the level into FreePageTablesRecursive (),
and limit the recursion to levels < 3.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
2020-03-26 10:34:14 +00:00
Ard Biesheuvel f52b30e73d ArmVirtPkg/PlatformPeiLib: add dummy assignment to work around older GCC
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like

  /work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
      In function ‘PlatformPeim’:
  /work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
      error: ‘Parent’ may be used uninitialized in this function
                                                [-Werror=maybe-uninitialized]
             RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);

Set Parent to 0 at the start of the sequence to work around this.

Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-26 08:09:53 +00:00
Ard Biesheuvel 92a1ac4080 OvmfPkg/X86QemuLoadImageLib: add dummy assignment to work around GCC
GCC 4.8 or 4.9 may throw the following error when building OVMF:

  Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:
      In function ‘QemuLoadKernelImage’:
  Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:416:30:
      error: ‘CommandLine’ may be used uninitialized in this function
                                               [-Werror=maybe-uninitialized]
        UnicodeSPrintAsciiFormat (
        cc1: all warnings being treated as errors

This is due to the fact that older GCCs fail to infer that CommandLine is
never actually used unless it has been assigned. So add a redundant NULL
assignment to help these older GCCs understand this.

Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2630
Fixes: 7c47d89003 ("OvmfPkg: implement QEMU loader library for X86 with ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-26 08:09:53 +00:00
Michael Kubacki e24529a5c3 ArmPlatformPkg/ArmPlatformPkg.dsc: Add missing components
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2575

The following components are currently missing from the [Components]
section of ArmPlatformPkg.dsc:
  * ArmPlatformPkg/Library/HdLcd/HdLcd.inf
  * ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf

This commit includes the components in the package DSC build.

Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2020-03-25 09:56:23 +00:00