If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18934 6f19259b-4bc3-4df7-8a09-765794883524
If there are any logical processor reporting an APIC ID of 255 or greater, set
X2ApicEnable flag.
GetInitialApicId() will return x2APIC ID if CPUID leaf B supported.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18933 6f19259b-4bc3-4df7-8a09-765794883524
Original code refers FreePoolHdr without check Status. It is obvious wrong and has risk.
Aslo, if InternalAllocPoolByIndex() returns an error, then *FreePoolHdr is assigned to an uninitialized value. So we init Hdr be NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18932 6f19259b-4bc3-4df7-8a09-765794883524
R_ARM_REL32 are relative relocations, so we don't need to do anything
special when performing the ELF to PE/COFF conversion, since our memory
layout is identical between the two binary formats. So just allow them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18931 6f19259b-4bc3-4df7-8a09-765794883524
The way the v7 MMU code is invoked by the Xen port is somewhat of
a pathological case, since it describes its physical memory space
using a single cacheable region that covers the entire addressable
range. When clipping this region to the part that is 1:1 addressable,
we end up with a region of exactly 4 GB in size, which just exceeds
the range of the UINT32 variable we use in FillTranslationTable() to
track our progress while populating the page tables. So promote it
to UINT64 instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18930 6f19259b-4bc3-4df7-8a09-765794883524
The ID mapping routines on virtual platforms simply map the entire
hardware supported physical address space as device memory, and then
punch some holes for regions that need to be mapped cacheable.
On virtual platforms hosted on CPUs that support a large physical
address range, this may result in a lot of overhead, i.e., 4 KB of page
tables for each 512 GB of address space, which quickly adds up (i.e.,
2 MB for the architectural maximum of 48 bits).
Since there may be a platform specific limit to the size of the (I)PA
space that is not reflected by CPU id registers, restrict the range of
the ID mapping to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize bits.
This makes sense by itself, since we cannot manipulate mappings above
that limit anwyay (because they are not covered by GCD), and it allows
the PCD be set to a lower value by platforms whose (I)PA space is
smaller than the hardware supported maximum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18929 6f19259b-4bc3-4df7-8a09-765794883524
KVM uses a fixed size of 40 bits for its intermediate physical address
space, so there is no need to support anything beyond that even if the
host hardware does.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18928 6f19259b-4bc3-4df7-8a09-765794883524
Align to old BDS behavior (IntelFrameworkModulePkg/BDS) to always create
MemoryTypeInfo variable regardless of the PcdResetOnMemoryTypeInformationChange
value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18926 6f19259b-4bc3-4df7-8a09-765794883524
Use new created libraries(Boot Manager,Device Manager,Boot Maintenance
Manager) in UiApp.So remove and refine relative code in UiApp.And update
the Nt32Pkg.dsc and MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18924 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot maintenance manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18923 6f19259b-4bc3-4df7-8a09-765794883524
Split the device manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18922 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18921 6f19259b-4bc3-4df7-8a09-765794883524
It is implied that the memory returned from UncachedMemoryAllocationLib
should have cache invalidated. So we invalidate memory range after
changing memory attribute to uncached.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18920 6f19259b-4bc3-4df7-8a09-765794883524
This library wrapper explorer protocol and produce the file explorer library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18919 6f19259b-4bc3-4df7-8a09-765794883524
This driver produces file explorer protocol layered on top of the FileExplorerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18918 6f19259b-4bc3-4df7-8a09-765794883524
This library support select one file from the specified directory or from system root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18917 6f19259b-4bc3-4df7-8a09-765794883524
In ArmLib, there exists an alias for ArmDataSynchronizationBarrier,
named after one of several names for the pre-ARMv6 cp15 operation that
was formalised into the Data Synchronization Barrier in ARMv6.
This alias is also the one called from within ArmLib, in preference of
the correct name. Through the power of code reuse, this name slipped
into the AArch64 variant as well.
Expunge it from the codebase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18915 6f19259b-4bc3-4df7-8a09-765794883524
The CpuDxe driver may run before the gEfiMetronomeArchProtocolGuid
protocol is installed. gBS->Stall does not work until this arch
protocol is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18914 6f19259b-4bc3-4df7-8a09-765794883524
The "read" word in SerialPortWrite() header comment block should be
"write".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18910 6f19259b-4bc3-4df7-8a09-765794883524
The "read" word in SerialPortWrite() header comment block should be
"write".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18909 6f19259b-4bc3-4df7-8a09-765794883524
The "read" word in SerialPortWrite() header comment block should be
"write".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18908 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
We need to check if SmmFeatureControl support or not by checking
SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP.
Because MSR_SMM_MCA_CAP is SMM-RO register, we should move this check from
SmmCpuFeaturesLibConstructor (non-SMM) to SmmCpuFeaturesInitializeProcessor
(SMM).
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18906 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18905 6f19259b-4bc3-4df7-8a09-765794883524
We currently rely on .align directives to ensure that each exception
vector entry is the appropriate offset from the vector base address.
This is slightly fragile, as were an entry to become too large (greater
than 32 A64 instructions), all following entries would be silently
shifted until they meet the next alignment boundary. Thus we might
execute the wrong code in response to an exception.
To prevent this, introduce a new macro, VECTOR_ENTRY, that uses .org
directives to position each entry at the precise required offset from
the base of a vector. A vector entry which is too large will trigger a
build failure rather than a runtime failure which is difficult to debug.
For consistency, the base and end of each vector is similarly annotated,
with VECTOR_BASE and VECTOR_END, which provide the necessary alignment
and symbol exports. The now redundant directives and labels are removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18904 6f19259b-4bc3-4df7-8a09-765794883524
As EDK2 runs in an idmap, we do not use TTBR1_EL1, nor do we configure
it. TTBR1_EL1 may contain UNKNOWN values if it is not programmed since
reset.
Prior to enabling the MMU, we do not set TCR_EL1.EPD1, and hence the CPU
may make page table walks via TTBR1_EL1 at any time, potentially using
UNKNOWN values. This can result in a number of potential problems (e.g.
the CPU may load from MMIO registers as part of a page table walk).
Additionally, in the presence of Cortex-A57 erratum #822227, we must
program TCR_EL1.TG1 == 0b1x (e.g. 4KB granule) regardless of the value
of TCR_EL1.EPD1, to ensure that EDK2 can make forward progress under a
hypervisor which makes use of PAR_EL1.
This patch ensures that we program TCR_EL1.EPD1 and TCR_EL1.TG1 as above
to avoid these issues. TCR_EL1.TG1 is set to 4K for all targets, as any
CPU capable of running EDK2 must support this granule, and given
TCR_EL1.EPD1, programming the field is not detrimental in the absence of
the erratum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18903 6f19259b-4bc3-4df7-8a09-765794883524
CatSPrint allocates return buffer for the caller. The caller doesn't have to allocate one, and has to free the used buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18902 6f19259b-4bc3-4df7-8a09-765794883524
The ARM_MEMORY_REGION_DESCRIPTOR array provided by the platform may
contain entries that extend beyond the 4 GB boundary, above which
we can't map anything on 32-bit ARM. If this is the case, map only
the 1:1 addressable part.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18900 6f19259b-4bc3-4df7-8a09-765794883524
Bits 0 and 6 of the TTBRx system registers have different meanings
depending on whether a system implements the Multiprocessing
Extensions. So use separate memory attribute definitions for MP and
non-MP.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18899 6f19259b-4bc3-4df7-8a09-765794883524
The definition of TTBR_NON_INNER_CACHEABLE should be bit 0 cleared, not
bit 0 set. Furthermore, the name is inconsistent with the other definitions
so rename it to TTBR_INNER_NON_CACHEABLE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18898 6f19259b-4bc3-4df7-8a09-765794883524
Even though mapping normal memory (inner) shareable is usually the
correct choice on coherent systems, it may be desirable in some cases
to use non-shareable mappings for normal memory, e.g., when hardware
managed coherency is not required and the memory system is not fully
configured yet. So introduce a PCD PcdNormalMemoryNonshareableOverride
that makes cacheable mappings of normal memory non-shareable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18897 6f19259b-4bc3-4df7-8a09-765794883524
To align with the way normal cacheable memory is mapped, set the
shareable bit for cached accesses performed by the page table walker.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18896 6f19259b-4bc3-4df7-8a09-765794883524
Some MMU manipulation is dependent on the presence of the multiprocessing
extensions. So add a function that returns this information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18895 6f19259b-4bc3-4df7-8a09-765794883524
Implement an accessor function for the ID_MMFR0 system register, which
contains information about the VMSA implementation. We will need this
to access the number of shareability levels and the nature of their
implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18894 6f19259b-4bc3-4df7-8a09-765794883524
The definition TTBR_WRITE_THROUGH_NO_ALLOC makes little sense, since
a) its meaning is unclear in the context of TTBRx, since write through
always implies Read-Allocate and no Write-Allocate
b) its definition equals the definition of TTBR_WRITE_BACK_ALLOC
So instead, rename it to TTBR_WRITE_THROUGH and update the definition
to reflect the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18893 6f19259b-4bc3-4df7-8a09-765794883524
To prevent speculative intruction fetches from MMIO ranges that may
have side effects on reads, the architecture requires device mappings
to be created with the XN or UXN/PXN bits set (for the ARM/EL2 and
EL1&0 translation regimes, respectively.)
Note that, in the ARM case, this involves moving all accesses to a
client domain since permission attributes like XN are ignored from
a manager domain. The use of a client domain is actually mandated
explicitly by the UEFI spec.
Reported-by: Heyi Guo <heyi.guo@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18891 6f19259b-4bc3-4df7-8a09-765794883524
Some users of this library (i.e., FVP-AArch64 and RTSM-A15_MPCore)
may be built to execute straight from NOR flash. Since device mappings
should have the XN attribute set (according to the architecture), mapping
the NOR flash as a device may prevent it from being executable.
Since the NOR flash DXE driver is perfectly capable of setting the correct
attributes for the region it needs to write to, and since we will be
executing from DRAM by that time anyway, we can simply map the NOR flash
as normal memory initially.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18890 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture version 7 and later mandates that device mappings
have the XN (non-executable) bit set, to prevent speculative instruction
fetches from read-sensitive regions. This implies that we should not map
regions as device if we want to execute from them, so the NOR region that
contains our FD image should be mapped as normal memory instead.
The MMU code deals correctly with overlapping ARM_MEMORY_REGION_DESCRIPTOR
entries, and later entries in the array take precedence over earlier ones.
So simply add an entry to the end of the array that overrides the mapping
attributes of the FD image, wherever it resides.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18889 6f19259b-4bc3-4df7-8a09-765794883524
The function GcdAttributeToArmAttribute() is not used anywhere in the
code base, and is only defined for AARCH64 and not for ARM. It also
fails to set the bits for shareability and non-executability that we
require for correct operation. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18888 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT (PrivateData->PeiMemoryInstalled) in if (PrivateData->PeiMemoryInstalled)
condition is useless, it should be ASSERT (FALSE) to follow the code's expectation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18887 6f19259b-4bc3-4df7-8a09-765794883524
The parameter name is also changed from Coordinate* to Offset* to
reflect that it's the offset to the location specified by Attribute.
For example, when the Attribute is Center, OffsetX and OffsetY are
used to specify the offset to the Center. OffsetX = 100 means
100 pixels right to the Center.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18867 6f19259b-4bc3-4df7-8a09-765794883524
The parameter name is also changed from Coordinate* to Offset* to
reflect that it's the offset to the location specified by Attribute.
For example, when the Attribute is Center, OffsetX and OffsetY are
used to specify the offset to the Center. OffsetX = 100 means
100 pixels right to the Center.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18866 6f19259b-4bc3-4df7-8a09-765794883524
We force alignment to 2K after generating the DebugAgentVectorTable
symbol, and hence DebugAgentVectorTable itself may not be 2K-aligned,
and table entries may not be at the correct offset from the
DebugAgentVectorTable base address.
Fix this by forcing alignment before generating the
DebugAgentVectorTable symbol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18865 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Zeng, Star
Ard Biesheuvel
Ruiyu Ni
Leif Lindholm
Dandan Bi
Heyi Guo
Eric Dong
Jordan Justen
Mark Rutland
Cecil Sheng
Hess Chen