REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2948
XhciDxe uses the timer functionality provided by the
boot services table to detect timeout conditions. This
breaks the driver's ExitBootServices call back, as
CoreExitBootServices halts the timer before signaling
the ExitBootServices event. If the host controller
fails to halt in the call back, the timeout condition
will never occur and the boot gets stuck in an indefinite
spin loop. Use the free running timer provided by
TimerLib to calculate timeouts, avoiding the potential
hang.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Patrick Henz <patrick.henz@hpe.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
On some platforms, including Sky Lake and Kaby Lake, the PSIV (Protocol
Speed ID Value) indices are shared between Protocol Speed ID DWORD' in
the extended capabilities registers for both USB2 (Full Speed) and USB3
(Super Speed).
An example can be found below:
XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
XhciPsivGetPsid: found 3 PSID entries
XhciPsivGetPsid: looking for port speed 1
XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
XhciPsivGetPsid: found 3 PSID entries
XhciPsivGetPsid: looking for port speed 1
XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248
The result is edk2 detecting USB2 devices as USB3 devices, which
consequently causes enumeration to fail.
To avoid incorrect detection, check the Compatible Port Offset to find
the starting Port of Root Hubs that support the protocol.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Add support process Port Speed field value of PORTSC according to
Supported Protocol Capability (define in xHCI spec 1.1)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3914
The value of Port Speed field in PORTSC bit[10:13]
(xHCI spec 1.1 section 5.4.8) should be change to use this value to
query thru Protocol Speed ID (PSI) (xHCI spec 1.1 section 7.2.1)
in xHCI Supported Protocol Capability and return the value according
the Protocol Speed ID (PSIV) Dword.
With this mechanism may able to detect more kind of Protocol Speed
in USB3 and also compatiable with three kind of speed of USB2.
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: More Shih <more.shih@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ian Chiu <Ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdeModulePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2948
Timeouts in the XhciDxe driver are taking longer than
expected due to the timeout loops not accounting for
code execution time. As en example, 5 second timeouts
have been observed to take around 36 seconds to complete.
Use SetTimer and Create/CheckEvent from Boot Services to
determine when timeout occurred.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Patrick Henz <patrick.henz@hpe.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The functions that are never called have been removed.
They are XhcReadDoorBellReg and XhcWriteOpReg16.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some XHCI host controllers require to have extra 1ms delay before
accessing any MMIO register during HC reset.
As this delay is not defined by XHCI spec, we use this workaround
to fix the issue.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the original code, there exists some mismatches between the real
waiting time and the corresponding timeout comments. For example, the
XHC_GENERIC_TIMEOUT comment says it's 10ms timeout value, but the real
code in fact waits 10s.
So the code is refined to be consistent in code logic and comments.
Note XHC_POLL_DELAY macro also be removed and the polling interval in
XhcWaitOpRegBit() is changed from 1ms to 1us to keep same code style
with other code. It has no real functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18235 6f19259b-4bc3-4df7-8a09-765794883524
1) XHCI host controller hw always provides more than 5 interrupters.
Now using interrupter 0 to accommodate all received events.
2) XHCI host controller hw always provides 32bytes context size.
Now it dynamically detect context size and construct it.
also solved several issues:
1) Divides 64byte width register access to two 32bit registers access because some XHCI chipsets cannot support a single 64bit access.
2) Remove halt host controller statement in UsbBusDriverBindingStop(). It has been done by host controller’s DriverBindingStop(). And XhciDriverBindingStop() need XHCI host controller is in running state because it need execute DISABLE_SLOT cmd to release h/w resource.
signed-off-by: erictian
Reviewed-by: li-elvin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12785 6f19259b-4bc3-4df7-8a09-765794883524
Henz, Patrick
Sean Rhodes
Ian Chiu
Michael Kubacki
Michael D Kinney
Marcin Wojtas
Star Zeng
shenglei
Hao Wu
Feng Tian
Elvin Li
Sergey Isakov
erictian