Support pre memory page allocation.
Support FreePages.
Allocation made prior to permanent memory will be
migrated to permanent memory and the HOB updated.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <Ruiyu.Ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
InstallPpi() will be used for normal PPI in PPI list from SEC,
and NotifyPpi() will be used for notification PPI in PPI list from SEC.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Make SetPeiServicesTablePointer() earlier than ProcessLibraryConstructorList()
so the constructor() function can get the correct pei service table pointer.
https://bugzilla.tianocore.org/show_bug.cgi?id=238
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PeiCore EntryPoint library _ModuleEntryPoint() will call PeiCore(), then call
CpuDeadLoop (). When NORETURN is added for PeiCore(), MSVC compiler will report
warning C4702: unreachable code for CpuDeadLoop (). And, the warning is treated
as error and cause build break. DxeMain() has the similar issue.
edk2 uses EntryPoint library to wrap every module entry point function except
for SEC. The module entry point is still called by _ModuleEntryPoint(). So,
there will be negative impact to add NORETURN for the module entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
This patch adds the NORETURN attribute to functions that transfer to
other phases, along with an UNREACHABLE() call at the end to avoid
false warnings.
DxeIpl has been excluded as its main function returns a status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI1.4a spec added "For S3 resume boot modes DXE IPL must be
prepared to execute without permanent memory installed and
invoke the S3 resume modules."
To follow PI1.4a spec, this patch is to update DxeIpl and
PeiCore to enable S3 resume from temporary memory.
The normal boot path still enforces the permanent memory
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Katie Dellaquila <katie.dellaquila@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2 changelog:
Check CurrentPeimHandle to check the matched PeimHandle.
Add check point to ShadowPeiCore based on PCD.
v1 changelog:
PeiCore LoadImage always shadow itself and PEIM on normal boot after
the physical memory is installed. On the emulator platform, the shadow
may be not necessary. To support such usage, new PCD PcdShadowPeimOnBoot
is introduced to specify whether loads PEIM in memory by default.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18125 6f19259b-4bc3-4df7-8a09-765794883524
Add status code report and cpu deadloop when DXE IPL PPI is not found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17087 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
2. Add support to find section by instance rather than only 0 at PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14763 6f19259b-4bc3-4df7-8a09-765794883524
2) Add ProcessLibraryConstructorList() call when OldCoreData != NULL and OldCoreData->ShadowedPeiCore == NULL.
3) Make sure no lib functions are used prior to the ProcessLibraryConstructorList() call.
4) Clean up comments
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10611 6f19259b-4bc3-4df7-8a09-765794883524
2) Update the logic that computes the offset of the heap and stack from TEMP RAM to Permanent RAM to handle all possible offsets values.
3) Minor cleanups to the PEI_CORE_INSTANCE structure
4) Simplify the logic that manages the TEMP RAM to PERM RAM transition and clean up the related DEBUG() messages.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10481 6f19259b-4bc3-4df7-8a09-765794883524
1, Implement EFI_PEI_FIRMWARE_VOLUME_PPI for FFS2 format as build-in supporting FV format in PeiCore.
2, Reduce the assumption of memory-mapped FV in PeiCore. PeiCore should access FV via EFI_PEI_FIRMWARE_VOLUME_PPI interface but not cast FvHandle/FileHandle to EFI_FIRMWARE_VOLUME_HEADER/EFI_FV_FILE_HEADER directly.
3, Reduce AllFv[] and AllFvCount in PEI_CORE_INSTANCE structure. Original PEI_CORE_INSTANCE use AllFv[] and Fv[] array to manage discovered FV and dispatched FV. But not need to make thing too complex. Now PEI_CORE_FV_HANDLE array of Fv[] will take responsibility to manage all FV instance and status.
4, Fix the bug use PeiDispatcher use wrong index for PeiFfsFindNextVolume(),
5, Fix the bug in PeiFfsFindNextVolume(), if instance is not found, *VolumeHandle should be set to NULL but not VolumeHandle was set to NULL.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9407 6f19259b-4bc3-4df7-8a09-765794883524
2. code base changes : modify some interface definitions to follow the lastest Mde Library Spec.
3. PeiCore changes : remove the return value of PeiCore() which is meaningless as PeiCore will never reach the end of procedure.replace it with VOID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6271 6f19259b-4bc3-4df7-8a09-765794883524
2) Move STRING_REF from MdePkg/Include/Uefi/UefiBaseType.h to IntelFramework/Include/Protocol/FrameworkHii.h.
3) Move RELOFST from MdePkg/Include/Uefi/UefiInternalFormRepresentation.h to IntelFramework/Include/Protocol/FrameworkHii.h.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6166 6f19259b-4bc3-4df7-8a09-765794883524
1) PeiMain:
- Use PCD for bundle of status code which definitions are put into MdePkg.dec file.
2) DxeMain:
- Use PCD for bundle of status code which definitions are put into MdePkg.dec file.
- Do not produce SectionExtraction protocol which is belong to IntelFramework specification.
- Update many macro for PI specifications.
3) DxeIpl
- Use PCD for bundle of status code which definitions are put into MdePkg.dec file.
4) Add SectionExtractionDxe module (IntelFrameworkModulePkg)
- This module will produce EFI_SECTION_EXTRACTION_PROTOCOL defined in framework specification. If a old platform want to use this protocol, then this platform need dispatch this DXE driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4376 6f19259b-4bc3-4df7-8a09-765794883524
2) Set the stack to be cacheable before the stack switch occurs so that IPF recovery path will be run from cacheble memory for code, data and stack.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4288 6f19259b-4bc3-4df7-8a09-765794883524
PI spec Vol 1, 7.3.1 specifies that this same information reported by EFI_SEC_PLATFORM_INFORMATION_PPI
will be placed in a GUIDed HOB with the PPI GUID as the HOB GUID for HOB consumer phase.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4166 6f19259b-4bc3-4df7-8a09-765794883524