If PIIX4 Power Management Base Address (PMBA) is already
programmed, then read and use it's current setting.
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Reviewed-by: gavinguan
Signed-off-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12053 6f19259b-4bc3-4df7-8a09-765794883524
* Add Ctrl-E hotkey for help
* Add Ctrl based hotkey alternatives to function hotkeys
* Don't show hotkey help on the main screen
* Change the file buffer's row count for display to adjust the new screen format
* Change the edit status bar location, the new edit status bar is in the last line
* Change the location of the edit bar, the new edit input bar is in the last line
Signed-off-by: kidzyoung
reviewed-by: jcarsey
reviewed-by: jljusten
reviewed-by: jiang
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12036 6f19259b-4bc3-4df7-8a09-765794883524
The code was using ARMv6 co-processor reg, that is a no-op on ARMv7. WFI is the instruction on ARMv7.
signed-off-by: andrewfish
reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12035 6f19259b-4bc3-4df7-8a09-765794883524
When the BeagleBoard UEFI is started from a 1st (or 2nd stage) boot loader
it is possible there are still some pending IRQ.
Clean the interrupts before starting the BeagleBoard UEFI.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12034 6f19259b-4bc3-4df7-8a09-765794883524
It was previously returning '0' written bytes that was interprating by the higher
layers as a failing operation.
Fix proposed by Eugene Cohen (HP)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12026 6f19259b-4bc3-4df7-8a09-765794883524
This library that uses the DebugAgentLib interface prints the loaded addresses
of the SEC and PEI_CORE module using PeCoffExtraActionLib.
Note: Because there is no PE loader for these XIP modules, PeCoffExtraActionLib is not invoked.
This library scans the firmware volume to find these modules and calculate their fixup loaded
addresses used to load their symbols in the debugger.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12023 6f19259b-4bc3-4df7-8a09-765794883524
This looks amlost like a bug in VS2008, please verify that the warning is fixed as I don't ahve a copy of VS2008.
signed-off-by: andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12020 6f19259b-4bc3-4df7-8a09-765794883524
Fixed issues with X64 clang, and also make StackSwitch push a zero on the new stack to prevent a stack unwind into memory that is no longer valid.
signed-off-by: andrewfish
reviewed-by: lgao4
reviewed-by: mdkinney
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12007 6f19259b-4bc3-4df7-8a09-765794883524
Removed passing VA_LIST and some assembly language compatability issues. Did not fix ReportStatusCode passing VA_LIST (non-ANSI C Code), and some of the assembler was not not ported and int 3 was inserted, as it likely is not needed.
signed-off-by: andrewfish
reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12006 6f19259b-4bc3-4df7-8a09-765794883524
- Give an overview of the different possible boot phases on ARM platforms (using
EDK2 for the full boot story or limiting its use to the last boot sequence)
- Show which functions to implement in ArmPlatformLib following the the boot phases
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12004 6f19259b-4bc3-4df7-8a09-765794883524
To build the UEFI BeagleBoard firmware using this ARM framework either use ./build-next.sh
or directly call the EDK2 BaseTools with BeagleBoardPkg-next.dsc.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11998 6f19259b-4bc3-4df7-8a09-765794883524
By setting this macro, the OMAP353x header is stripped from the UEFI firmware.
Some boot loader (eg: x-loader) loads the second stage boot loader (u-boot or
uefi) to a specific address and start the firmware from this address.
This macro ensures the reset vector is located at the beginning of the image.
To build the BeagleBoard with ./build.sh to enable this feature:
./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1
Note: in this case, you must use BEAGLEBOARD_EFI.fd (and not
BeagleBoard_EFI_flashboot.fd)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11995 6f19259b-4bc3-4df7-8a09-765794883524
jljusten
oliviermartin
ydong10
lzeng14
jcarsey
andrewfish
hhuan13
rsun3
niruiyu
lgao4