REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2632
Both PEI and DXE instances of the MpInitLib are using PcdLib APIs, but
none of them list the dependency of the PcdLib in INF & header files.
This commit will explicitly add such dependency in .H and .INF files.
Test done:
Library level build pass for VS2015x86 tool chain
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
So this patch adds a platform PPI for the microcode shadow logic, and
remove the FIT related code from EDK2.
The FIT based microcode shadow support will be implemented as a new
platform PEIM in IntelSiliconPkg in edk2-platforms.
This patch doesn't provide a DXE version shadow microcode protocol,
a platform which only uses DxeMpInitLib instance only supports PCD
based microcode shadowing.
A detailed design doc can be found here:
https://edk2.groups.io/g/devel/files/Designs/2020/0214/Support%20
the%202nd%20Microcode%20FV%20Flash%20Region.pdf
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will update the MpInitLib to:
A. Collect the base address and size information after microcode patches
being loaded into memory;
B. Collect the detected microcode patch for each processor within system;
C. Based on the collected information, produce the EDKII microcode patch
HOB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
When resume from S3 and CPU loop mode is MWait mode,
if driver calls APs to do task at EndOfPei point, the
APs can't been wake up and bios hang at that point.
The root cause is PiSmmCpuDxeSmm driver wakes up APs
with HLT mode during S3 resume phase to do SMM relocation.
After this task, PiSmmCpuDxeSmm driver not restore APs
context which make CpuMpPei driver saved wake up buffer
not works.
The solution for this issue is let CpuMpPei driver hook
S3SmmInitDone ppi notification. In this notify function,
it check whether Cpu Loop mode is not HLT mode. If yes,
CpuMpPei driver will set a flag to force BSP use INIT-SIPI
-SIPI command to wake up the APs.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because we will always borrow the AP reset vector space for AP waking up. We
needn't allocate such range to prevent other module to use it. It could simply
the code.
https://bugzilla.tianocore.org/show_bug.cgi?id=500
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Hao A Wu
Siyuan Fu
Laszlo Ersek
Michael D Kinney
Eric Dong
Jeff Fan