The patch doesn't impact the functionality.
The rename also fixes the inconsistency between function
header comments and function parameters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current UefiDpLib implementation depends on TimerLib,
as different platforms may implement and use their
own TimerLib, it makes the dp command needs to be built
by platform. The TimerLib dependency can be removed by
using performance property configuration table to make
UefiDpLib to be generic.
Cc: Andrew Fish <afish@apple.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Type 0: Update "EDD Enhanced Disk Driver)..." to
"EDD (Enhanced Disk Driver)..." for
STR_SMBIOSVIEW_PRINTINFO_EDD_ENHANCED_DRIVER
Type 3: Use L" Laptop" instead of L" LapTop" in
SystemEnclosureTypeTable to match SMBIOS spec.
Type 10: The BIT7 of Device Type is representing the
status of device whether it is enabled or disabled.
But current code is not considering the BIT7 and will
print "Undefined Value" for enabled device. Type 41
has same definition of Device Type, the code is
correct and will be applied to Type 10 by this patch.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current PrintBitsInfo() will always print an additional trailing
" | " for the bit flags, for example,
Base Board Feature Flags: Hosting board | Replaceable |
Th patch is to eliminate trailing " | " in PrintBitsInfo(), then
the output will be like below
Base Board Feature Flags: Hosting board | Replaceable
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Before the "cd fs0:dir" fix, CD only prints destination directory
when the destination contains ":".
However, the "cd fs0:dir" fix changed CD to always print destination
directory.
This patch changes CD to never print destination directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Chris J Phillips <chrisp@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
The implementation was already there but through a private flag
"-_e". The patch removes "-_e" support and add "-ec" support.
Removing old "-_e" support makes the pci command more clean.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=354
The patch removes the local PCI definitions and uses the definitions
defined in MdePkg/Include/IndustryStandard folder.
There is no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
The decoding of TPM Device (Type 43) has been added at
e9f0be021b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
if we set a static IP using command
'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0'
The system says 'Failed to set address.' but using
'ifconfig -l', the static IP can be assigned successfully.
so we need to check the gateway validity before setting manual
address to keep the ifconfig -s command more consistent.
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345
When I am adding SMBIOS spec 3.1.0 support, I found the decoding
of SMBIOS spec 3.0.0 for some definitions is missing.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344
SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding
of it is missing. I found it when I am adding SMBIOS spec 3.1.0
support.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When we issue 'ifconfig6 -s <interface> auto' system hangs with
an ASSERT in StrLen. in IfConfig6SetInterfaceInfo, for 'auto' case
we added checks to rule out the invalid inputs like 'host', 'gw'
and 'dns'. To parse through this, we do a VarArg = VarArg->Next but
we dont check new VarArg before calling StrCmp. Fix with a check
in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Added decoding of the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The smbiosview command was not displaying SMBIOS Type 3 Height, NumberofPowerCords, or SKU Number.
Added handling to display these values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
To follow Shell spec 2.2, change "dh" to support dump from
protocol GUID and support "decode" parameter to dump the
GUID/name mapping.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "fs0:dir"(drive letter without slash) is used as destination
of "cd", "cd" tries to change to "dir" in root directory of "fs0:".
It's incorrect. The correct behavior is to change to "dir" in
current directory of "fs0:"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since the type of ShellStatus is SHELL_STATUS, we should use
SHELL_INVALID_PARAMETER instead of EFI_INVALID_PARAMETER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2: update the prompt message more readable.
It should display error prompt message when Ifconfig6 can
not configure correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed by : Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When user types "mv -r fs0:\A\ fs1:\" under directory
"fs0:\A\B\", MV command should deny such movement.
The patch fixes the above issue.
It also denies moving current directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch update the shell ping command to use timer service to calculate the
RTT time, instead of using the timer arch protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The patch adds the "-sfo" support to "dmpstore" command.
When -l or -d is specified, -sfo is not supported.
When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""
"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist
The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
DumpHex() and CatSDumpHex() are public library APIs but don't have
EFIAPI modifier. Add the missing EFIAPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
'Ping6 TargetIp' is a valid command input but we bail out
when TargetIp is a link local address because we would want
the user to specify the NIC (via SourceIp) through which
he/she would want to ping to TargetIp. This patch updates
the help text to mention the same.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch adds "-fwui" support to reset command which is newly added
to Shell 2.2 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When copy command prompts to overwrite an existing file, pressing
backspace continuously removes everything including the shell prompt.
So print only valid characters for file overwrite prompt.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The ping command uses PI CPU arch protocol to calculate the RTT time, which is
not allowed to use in UEFI shell. This patch updates it to use the UEFI timer
event and Stall service to estimate the system timer period.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
'-t or -terse' and '-s' flags are multiple exclusive
So when both flags are used together, command should report an error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The more proper place for macro SHELL_FREE_NON_NULL is ShellLib.h
instead of ShellBase.h.
Modify Compress.c to resolve build failure due to this change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Clear up some help text for the TFTP shell command
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Allows cd command to go back to the root directory when 'cd \' executed in system.
This change prevents last PathRemoveLastItem() call which truncates '\' from 'fs0:\'
in desired root path which is required to set CWD to the root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
In ShellOpenFileByName() the file is opened using
gEfiShellProtocol->OpenFileByName().
It is supposed that if this call returns an EFI_ERROR, the function
should return that error immediately. However, this return was missing,
and if UnicodeCollationProtocol has not been located by this time, the
Status gets overwritten with LocateProtocol() call result, which
eventually erroneously returns EFI_SUCCESS to the Shell.c, and this
leads to attempt to execute a non-existent startup script, which fails,
and which in turn leads to Shell being unloaded with "Invalid parameter"
error. This patch fixes the bug.
Cc: Tapan Shah <tapandshah@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1416 change in UEFI Shell Specification 2.2,
enhancing 'cls' command to change the background color as well as
foreground color. Also add support to display current settings
using 'cls -sfo' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Minor changes to match help output notes for disconnect command
with UEFI Shell 2.2 specification document.
Few other formatting changes to fit the help output in 80x25 screen size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1349, latest UEFI Shell 2.2 specification has removed current working directory
path ".;" from a default 'path' environment variable as current working directory always
search first in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1349 change in UEFI Shell Specification 2.2, expanding
a special output file name to include "NULL". Previously it only
supported "NUL" as a special output file and it was case sensitive.
With this change both "NUL" and "NULL" are special output file and
checked as case insensitive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1416, latest UEFI Shell 2.2 Specification has added Persistent
Memory support in 'memmap' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
As per ECR 1416, latest UEFI Shell 2.2 specification:
Define a behavior where 'disconnect -r' will disconnect drivers
from all devices but it will reconnect all consoles.
If -nc flag is used (e.g. 'disconnect -r -nc') then disconnect drivers
from all devices and don't reconnect consoles.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The ParseHandleDatabaseForChildControllers() function intends to work like
this:
(1) It allocates a "HandleBufferForReturn" local array that's guaranteed
to be big enough for all found handles,
(2) it collects the handles, both counting them in the (mandatory)
"MatchingHandleCount" output parameter, and saving them in the local
"HandleBufferForReturn" array,
(3) if the caller is not interested in the actual handles, then
"HandleBufferForReturn" is released,
(4) if the caller is interested in the handles, and we've found some, then
"HandleBufferForReturn" is passed out through the
"MatchingHandleBuffer" output parameter,
(5) if the caller is interested in the actual handles, but we've found
none, then the "MatchingHandleBuffer" output parameter is set to NULL.
The ASSERT() at the end of the function makes this clear, but the
implementation does not conform to (5). Fix it.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Reported-by: Tapan Shah <tapandshah@hpe.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=112
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
According to PCI spec the next AER capability is relative to
the beginning of PCI configuration space. Hence substract the
base offset to get the next capability.
"-_e" option is changed from TypeFlag to TypeValue, so that
user can specify individual AER capability to print.
e.g. pci 00 00 01 -i -_e <capability-id>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In shell spec, the usage of "Drvcfg" command is: drvcfg [-l XXX] [-c]
[-f <Type>|-v|-s] [DriverHandle [DeviceHandle [ChildHandle]]]
[-i filename] [-o filename]. The parameter number(doesn't include the flags)
cannot exceed 4, now we add this point to check whether using the command
correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When user uses the command "bcfg driver|boot [dump [-v]]",
the number of command line value parameters (doesn't include the
flag) must be three. We can add this point to check whether using
this command correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 0fcf8d4df8.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 95fc5a8775.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Add EFIAPI in CatPrint library function. Every function which uses
variable list need explicit use EFIAPI to force use MS ABI. This change
is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use explicit CopyMem to replace compiler builtin to do the structure
values assignment. This change is needed to pass CLANG38 build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
“ls fs0:\File.txt" can list the file correctly but
when the backslash is removed from colon, the file cannot
be listed.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It is to make the info shown more aligned with SMBIOS spec.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Old implementation depends on UefiHandleParsingLib and uses
incorrect Index to get handle type.
The simplest ConnectAll() implementation can be just to
locate all handles and call BS.ConnectController() for each
of them recursively. BS.ConnectController() does nothing
to the image handle. Such implementation is borrowed from
BDS core implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Run 'echo -t' without the patch will get the result:
echo: Unknown flag - '-t'
The expected result is to display '-t' literally.
This patch adds special handle for 'echo'. 'echo' will not use the
general parameter parsing library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
And add Shell prefix to the two library APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Follow the Shell Spec, when the interface name is Specified,
we need to refresh the Ipv6 configuration.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This reverts commit ee60bd2b6a and
e36ed7a84b.
The two commits enhanced 'edit' to support text selection through
mouse. But the code introduced some bugs resulting the text
selection behavior is not very usable and potentially hang in
certain platforms.
So I'd like to revert them firstly. If there is strong
requirement for the text selection through mouse in 'edit'
I will refine and re-add the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
When we have intermittent loss of packets, ping command doesnt
return to Shell prompt. It keeps looping in the while (Status
==EFI_NOT_READY) since Private->RxCount will never reach
Private->SendNum. Addresses the issue with the use of a new varibale
in the PRIVATE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
when we use the ping6 command without configuring the network
interface, it should give correct prompt to users.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
When ASSERT_EFI_ERROR() is compiled out, dependent on build flags, only
the status checking should be removed; the function calls should stay.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch fixed a bug in UefiHandleParsingLib to show handle's loaded
image device path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The output of "dh <handle>" originally is like below:
12C: USBIO DevicePath(x0)/Pci(0x14,0x0)/USB(0x6,0x0))
The device path part is very confusing. Use ".." in front of the
partially displayed device path is better and it also aligns to
the example output in Shell spec.
12C: USBIO DevicePath(..)/Pci(0x14,0x0)/USB(0x6,0x0))
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch fixes the ARM build failure introduced by
2be45bfe27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Until now the 'addp' command has been handled in the same way as 'add'.
Just copy the DevicePath starting from the Hard Drive node when 'addp'
is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
TFTP block size has a big impact on the transmit performance, this patch is to
add new argument [-s <block size>] for shell "tftp" command to configure the
block size for file download.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When executing shell dp command, there is an error message "Timer library
instance error!"
The error message "Timer library instance error!" should be for the case about
duration > EndTimeStamp if CountUp or duration > StartTimeStamp if CountDown.
But if the EndTimeStamp of an entry is not added, it should not the case to catch.
This change fixes the error message "Timer library instance error!" from the
"BdsAttempt" entry which is logged when trying to boot a boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
v2:
* Refine the code to make it more readable.
This patch is used to support no source IP specified case while
multiple NICs existed in the platform. The command will select the
first both connected and configured interface automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is used to update ping command options to sync
with shell2.2 Spec.
Considering the backward compatible issue, the patch keeps
‘-_s’ command option unchanged, only add the new option '-s'
and make the old option '-_s' function same as new one.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For Boolean values not use explicit comparisons to TRUE or FALSE. For non-Boolean
comparisons we should use a compare operator.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The allocated memory of ParamPackage is not freed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Pass in GUID* for the GUID reference in a CatSPrint statement. Issue was noticed when running "dh -d -v" command on a system with a PCI NIC installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Remove variable FStartRow that is declared, assigned but never referenced.
This fixes a warning emitted by GCC when -Wunused-but-set-variable is in
effect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Make the USB mouse cursor move smoothly in 'edit'.
2. Make the USB mouse can drag and select text in 'edit'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix SMBIOSVIEW decode of the HeaderLog fields of the PCIe
AER structure . The PCIe 2.1 Base Specification, section 7.10, lists
this as 16 bytes, or 4 DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is used to update ifconfig -r implementation
to sync with UEFI Shell 2.2.
option -r means to reconfigure all or specified interface,
and set DHCP policy. If specified interface is already set
to DHCP, then refresh the IPv4 configuration.
If the interface name is specified
with '-r', DHCP DORA process will be triggered by the policy
transition (static -> dhcp).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
'd6cf1af9' is associated with '3d0a49ad' commit. So, this patch is
used to respond the revert for '3d0a49ad' to adapt the Ipv4 config
policy update.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
USB mouse cursor cannot move unless the left button is down. The patch
refresh the FileBuffer of Editor every time when the 'MainEditorRefresh'
is called to fix this bug.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Do NULL pointer check before the pointer is used to avoid dereferenced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Refine the code to use 'sizeof(EFI_LOAD_OPTION)' as offset in buffer to get 'description' instead of using a constant number.
This change makes the code more readable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19746 6f19259b-4bc3-4df7-8a09-765794883524
The changes due to the previous patches should be reflected in a higher
minor version number.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Suggested-by: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19719 6f19259b-4bc3-4df7-8a09-765794883524
The DumpHex() function produces very friendly output (known from DMPSTORE,
for example); let's use it with "BCFG -v" as well.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19718 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI Shell specification classifies shell commands into various shell
levels / profiles.
Currently the DumpHex() internal function is only used by commands that
belong to the Debug1 profile exclusively (i.e., they are not required to
be present in other than Debug1 profiles):
- SMBIOSVIEW
- PCI
- DMPSTORE
- DMEM
- DBLK
In the next patch, we'd like to call DumpHex() from BCFG as well. However,
BCFG is not only required to be present in the Debug1 profile; the
Install1 profile contains BCFG as well. For this reason, move DumpHex()
from UefiShellDebug1CommandsLib to the more generic UefiShellCommandLib,
which "Provides interface to shell internal functions for shell commands".
The matching header file is "ShellPkg/Include/Library/ShellCommandLib.h".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19717 6f19259b-4bc3-4df7-8a09-765794883524
This is likely a copy & paste error from the preceding ShellPrintHiiEx()
function call. ShellPrintEx() takes no Language parameter, so remove the
NULL argument, which is currently misinterpreted as a format string.
This bug prevents the hexdump of optional data even when -v is passed to
BCFG, and optional data exist.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19716 6f19259b-4bc3-4df7-8a09-765794883524
In this cleaned up form of BcfgDisplayDump(), it is easier to see that the
OptionalDataOffset <= BufferSize
expression, used to report whether optional data are *absent*, is
incorrect. For any well-formed EFI_LOAD_OPTION, this inequality always
holds.
Optional data are present exactly if
OptionalDataOffset < BufferSize
therefore the absence condition is the negation of the above,
OptionalDataOffset >= BufferSize
This patch fixes the bug where BCFG always reports "Optional- N", even if
optional data exist.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19715 6f19259b-4bc3-4df7-8a09-765794883524
Copying and releasing each EFI_LOAD_OPTION.FilePathList under the name
DevPath is wasteful -- we only need FilePathList for a single conversion
to text. Do it directly from the EFI_LOAD_OPTION object.
This patch is not supposed to change observable behavior.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19713 6f19259b-4bc3-4df7-8a09-765794883524
The Buffer variable points at the beginning of an EFI_LOAD_OPTION
structure. We might as well address the "FilePathListLength" member by
name, rather than with *(UINT16*)(Buffer+4).
This patch is not supposed to change behavior.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19711 6f19259b-4bc3-4df7-8a09-765794883524
"3.1.1 Boot Manager Programming" in the UEFI 2.5 spec mandates that
Boot#### and similar options contain EFI_LOAD_OPTION structures. The
EFI_LOAD_OPTION structure encodes the fixed initial part of the payload,
and we can (and should) use it to enforce a minimum size for variable
contents.
This patch is meant as a safety improvement.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19710 6f19259b-4bc3-4df7-8a09-765794883524
Don't exit the command immediately when a variable access fails; continue
processing after printing the error message. Let the final return status
reflect any encountered errors.
This patch is intended as a functional improvement.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19709 6f19259b-4bc3-4df7-8a09-765794883524
It will help with error handling if we move these initializations near the
top of the loop body.
This patch is not supposed to change behavior.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19708 6f19259b-4bc3-4df7-8a09-765794883524
STR_GEN_PROBLEM_VAL, STR_GEN_TOO_MANY, and STR_BCFG_LOCATION_RANGE are not
used in the C source code. Remove them to decrease clutter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19707 6f19259b-4bc3-4df7-8a09-765794883524
This patch incurs no functional changes, it just modifies some whitespace,
so we can separate these non-functional changes from the functional
changes in the next patches.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19706 6f19259b-4bc3-4df7-8a09-765794883524
This enhancement is to use the FilePath field in the loaded image
protocol to find the name of an image as a fallback for when the
loaded image device path protocol is not installed on the image handle.
This is necessary because the SMM core does not install the loaded
image device path protocol, so DP was displaying "Unknown Driver Name"
for every SMM driver.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19683 6f19259b-4bc3-4df7-8a09-765794883524
'dh' command shows Supported EFI Specification Version value as DriverVersion. Changing it to 'SupportedEfiSpecVersion' to provide more accurate information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19648 6f19259b-4bc3-4df7-8a09-765794883524
When we run command "alias cat" Shell print out "alias: Too few arguments". This patch makes value of single alias name can be displayed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19608 6f19259b-4bc3-4df7-8a09-765794883524
When run command 'mv file ' the Shell assert. The patch refined the length of the buffer to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19607 6f19259b-4bc3-4df7-8a09-765794883524
Using UEFI_APPLICATION for all Shell app and libraries allows the use of
different compiler flags for the Shell application itself and for other
applications that are built separately that use Shell libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19585 6f19259b-4bc3-4df7-8a09-765794883524
When run help command Shell may have memory leak. This patch fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yao Jiewen <Jiewen.Yao@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19526 6f19259b-4bc3-4df7-8a09-765794883524
'bcfg boot mv xx yy' command will ASSET when xx is larger than the count of boot options.
This patch correct the order of ShellPrintHiiEx parameters to fix the bugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19295 6f19259b-4bc3-4df7-8a09-765794883524
Fix build warnings for potentially uninitialized local variables
in the functions ShellMmLocateIoProtocol() and ShellCommandRunMm()
in the Shell implementation of the 'mm' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19233 6f19259b-4bc3-4df7-8a09-765794883524
This patch is used to fix ifconfig hang issue with incomplete
parameters. In addition, some error related output information
is added to increase the interactivity.
Cc: Leekha Shaveta <shaveta@freescale.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Tested-by: Leekha Shaveta <shaveta@freescale.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19212 6f19259b-4bc3-4df7-8a09-765794883524
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
When using 'dh' to dump all protocols installed on a handle, some of
them are shown as 'UnknownDevice'.
Device patch make 'dh' support all spec defined protocols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19177 6f19259b-4bc3-4df7-8a09-765794883524
In some platform 'map -r' may cost more than 1 min. This patch filter the target handles by
BlockIO and SimpleFileSystem protocol to reduce the time cost.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19149 6f19259b-4bc3-4df7-8a09-765794883524
When CustomCumulativeToken is not NULL, the CustomCumulativeData is expected non-NULL.
Add 'ASSERT' statement to ensure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18956 6f19259b-4bc3-4df7-8a09-765794883524
CatSPrint allocates return buffer for the caller. The caller doesn't have to allocate one, and has to free the used buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18902 6f19259b-4bc3-4df7-8a09-765794883524
The value of PERF_CUM_DATA.Count and PERF_CUM_DATA.Duration field
keep cumulating on every execution of dp.
Initialize the CumData at dp's entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18727 6f19259b-4bc3-4df7-8a09-765794883524
Same as the beginning of function to use DP_GAUGE_STRING_LENGTH, but not
DXE_PERFORMANCE_STRING_LENGTH.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18725 6f19259b-4bc3-4df7-8a09-765794883524
Changing 'tftp' command's help output .uni file to match other EDK2 Shell commands as well as adjusting error messages text.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18659 6f19259b-4bc3-4df7-8a09-765794883524
In Shell spec 2.1 the return name of EFI_SHELL_PROTOCOL.GetCurDir() is defined as 'fs0:\current-dir' while in current implementation it's 'fs0:\current-dir\'.
To follow spec the patch removed the redundant '\' char.
Since it has been broken for a long time, some codes may depend on the broken behavior.
After this change 'EFI_SHELL_PROTOCOL.GetCurDir()' and 'UefiShellLib.ShellGetCurrentDir()'
will return a current directory string without tailing '\' (fs0:\current-dir), the value of Shell environment variable 'cwd' will become 'fs0:\current-dir' as well.
This patch has updated all the code in EDKII to make them depend on the new behavior.
Developers should check whether 'GetCurDir()' and 'ShellGetCurrentDir' are used in their source code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18653 6f19259b-4bc3-4df7-8a09-765794883524
If you try to 'set' a read only environment variable and it fails without printing any information.
This patch add error message printing when 'set' environment variable fails.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18598 6f19259b-4bc3-4df7-8a09-765794883524
Add the missing EFIAPI calling convention to the CheckPacket() function.
Without it, the gcc build breaks due to the incompatible pointer
assignment in "Mtftp4Token.CheckPacket = CheckPacket".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18553 6f19259b-4bc3-4df7-8a09-765794883524
Added SMBIOS 3.0 support in dmdem Shell command since SMBIOS 3.0 uses a different GUID in the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18506 6f19259b-4bc3-4df7-8a09-765794883524
There are other libraries with similarly named functions that could be linked with the Shell
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18456 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update to use NetLibDetectMedia() directly.
This patch is used to get media status in ifconfig command.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18363 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
R18201 fix caused ifconfig in shell failed to get the address from dhcp with the
command "ifconfig -s eth0 dhcp" since the default policy is dhcp already.
We can fix it by following the rule to starting the Ip4 auto configuration.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18244 6f19259b-4bc3-4df7-8a09-765794883524
1. Refine parameter name to consistent with function headers.
2. To avoid potential bug BOOLEAN values should not use explicit comparisons to TRUE or FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18222 6f19259b-4bc3-4df7-8a09-765794883524
EDK II C coding style requires use of 'm' or 'g' for module globals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18184 6f19259b-4bc3-4df7-8a09-765794883524
Initialize local variable before it is passed into a function by reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18183 6f19259b-4bc3-4df7-8a09-765794883524
Fix issue about ping fail with IPv4, which is caused by the incorrect
checksum in request message.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18167 6f19259b-4bc3-4df7-8a09-765794883524
EFI_UNSPECIFIED_TIMEZONE means display local time. TZ of 0 is UTC.
Thus EFI_UNSPECIFIED_TIMEZONE means ignore TZ, 0 means UTC. When this code is
fixed to adust file TZ to local TZ you need to preserve
EFI_UNSPECIFIED_TIMEZONE.
FAT always return EFI_UNSPECIFIED_TIMEZONE.
Modern filesystems, HFS+, NTFS, ext3, etc store time in UTC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18051 6f19259b-4bc3-4df7-8a09-765794883524
This 'tftp' command allows to download a file from a TFTP server.
A specific network interface can be chosen in case there are multiple
interfaces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18015 6f19259b-4bc3-4df7-8a09-765794883524
Serial console driver may not support all databits / stopbits attribute values.
But ‘sermode’ command only displays a general error indicating operation failure.
Instead it should decode error status and report more accurate error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17978 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <<tapandshah@hp.com>>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17894 6f19259b-4bc3-4df7-8a09-765794883524
that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17888 6f19259b-4bc3-4df7-8a09-765794883524
Dandan Bi
Ruiyu Ni
Hao Wu
Chen A Chen
Star Zeng
Zhang Lubo
hegdenag
Linson Augustine
Chris Phillips
Gary Lin
Tapan Shah
Laszlo Ersek
Fu Siyuan
Thomas Palmer
Vladimir Olovyannikov
Michael Kinney
Abdul Lateef Attar
Shi, Steven
Liming Gao
Mudusuru, Giri P
Subramanian, Sriram (EG Servers Platform SW)
Qiu Shumin
Cinnamon Shia
Jiaxin Wu
Samer El-Haj-Mahmoud
Ard Biesheuvel
Zhang, Lubo
Jim Dailey
Jaben Carsey
Samer El-Haj-Mahmoud
Yao Jiewen
Jordan Justen
Cecil Sheng
Eric Dong
Tapan Shah
Andrew Fish
Ronald Cron