Displays the Nvme total capacity.
Signed-off-by: Cheng Zhou <zhoucheng@phytium.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2989
Long times spent on shadowing oprom from graphics card to system memory.
We are currently using 8 bit read cycles. This needs to be wider,
at least 32bit reads to reduce the time for oprom shadow.
Signed-off-by: Sumana Venur <sumana.venur@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3418
According to xhci spec, at USB packet level, a Control Transfer
consists of multiple transactions partitioned into stages: a
setup stage, an optional data stage, and a terminating status
stage. If Data Stage does not exist, the Transfer Type flag(TRT)
should be No Data Stage.
So if data length equals to 0, TRT is set to 0.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
If the function gets invalid value for the `ResizableBarOp` parameter
and asserts are disabled, `Bit` can be used uninitialized.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix various typos throughout MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3228
This change is to fix the false compiler error on GCC49 release build.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3217
Current Ufs Pass thru driver polls for 5us and return success even when
the timeout occurs.
There are cards that can take upto 600ms for Init and hence increased
the time out for fDeviceInit polling loop.
Signed-off-by: Bandaru <purna.chandra.rao.bandaru@intel.com>
Cc: Mateusz Albecki <mateusz.albecki@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The ProcessOptionRomLight() assumes that OpRom has already been
processed in the previous full enumeration and updates
AllOpRomProcessed flag to TRUE by default. However, this may not
be applicable with other pre-stage boot firmwares.
This will update AllOpRomProcessed flag properly by checking
PciRomGetImageMapping().
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3149
Address MEM64 BAR in type unknown if sizing fail in high 32bit.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Zarcd Zhong <zarcd.zhong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=313
Add PcdPcieResizableBarSupport to enable/disable PCIe Resizable
BAR Capability fearture.
Program the Resizable BAR Register if the device suports PCIe Resizable
BAR Capability and PcdPcieResizableBarSupport is TRUE.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3114
Add logic to flush all UART transmit buffers if there is a
config change from Reset(), SetAttributes() or SetControl().
Use a timeout in the flush operation, so the system can
continue to boot if the transmit buffers can not be
flushed for any reason.
This change prevents lost characters on serial debug logs
and serial consoles when a config change is made. It also
prevents a UART from getting into a bad state or reporting
error status due to characters being transmitted at the same
time registers are updated with new communications settings.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This simplify ATA driver debugging all ATA packets will be printed to
debug port on DEBUG_VERBOSE level along with the packet execution
status. Additionally failed packets and the failed packet execution
status will be printed on DEBUG_ERROR level.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3026
This commit adds code to restart the ATA packets that failed due to the
CRC error or other link condition. For sync transfers the code will try
to get the command working for up to 5 times. For async transfers, the
command will be retried until the timeout value timeout specified by the
requester is reached. For sync case the count of 5 retries has been
chosen arbitrarily and if needed can be increased or decreased.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3025
This commit adds error recovery flow on SATA port when the error
condition is reported. Commit only implements SATA port reset flow which
is executed when PxTFD indicates BSY or DRQ. Commit does not implement
HBA level reset.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3024
AHCI driver used to poll D2H register type to determine whether the FIS
has been received. This caused a problem of long timeouts when the link
got a CRC error and the FIS never arrives. To fix this this change
switches AHCI driver to poll the IS register which will signal both the
reception of FIS and the occurrence of error.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
With some super-speed USB mass storage devices it has been observed
that a USB transaction error may occur when attempting the set the
device address during enumeration.
According the the xHCI specification (section 4.6.5) ...
"A USB Transaction ErrorCompletion Code for an Address Device Command
may be due to a Stall response from a device. Software should issue a
Disable Slot Commandfor the Device Slot then an Enable Slot Command
to recover from this error."
To fix this, retry the device slot initialization if it fails due to a
device error.
Change was verified using a superspeed mass storage device that was
occasionally failing to enumerate in UEFI. With this change this failure
to enumerate was resolved. This failure was also only seen in UEFI and not
in the OS.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3007
Currently UsbDevContext is not cleaned up if USB slot initialization is
failed, the wrong context data will affect next USB devices and
the USB devices can not be enumerated.
Need to disable slot if USB slot initialization is failed.
Below test cases are passed on UpXtreme:
a. USB 3.0 thumb drives can be recognized in UEFI shell
b. SUT can boot to Puppylinux from USB3.0 mass storage,
the storage can be recognized in linux
c. Plug in a USB keyboard (hot plug) and enumeration is OK
in UEFI shell and linux
d. Plug in a USB mouse(hot plug) and enumeration is OK in linux.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2948
Timeouts in the XhciDxe driver are taking longer than
expected due to the timeout loops not accounting for
code execution time. As en example, 5 second timeouts
have been observed to take around 36 seconds to complete.
Use SetTimer and Create/CheckEvent from Boot Services to
determine when timeout occurred.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Patrick Henz <patrick.henz@hpe.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Add check for NULL HostAddress in AllocateBuffer as required by UEFI
specification.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1959
Replaces usage of the linked list iteration macros defined in UfsPassThru.h
with the common definition in BaseLib.h.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1959
Replaces usage of the linked list iteration macros defined in Xhci.h
with the common definition in BaseLib.h.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1959
Replaces usage of the linked list iteration macros defined in EhcPeim.h
with the common definition in BaseLib.h.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1959
Replaces usage of the linked list iteration macros defined in Ehci.h
with the common definition in BaseLib.h.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2286
Token pointer may be NULL, it should be checked before use it.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
ASSERT in PollMem_Conf, CopyMem_Conf, SetBarAttributes_Conf
Conformance Test.
SCT Test expect return as Invalid Parameter or Unsupported.
Added Checks for Function Parameters.
return Invalid or Unsupported if Check fails.
Added Checks in PciIoPollIo(), PciIoIoRead()
PciIoIoWrite()
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Current driver does not support PIO transfer mode for
commands other then tuning. This change adds the code
to transfer PIO data.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Driver code used to map memory for DMA transfer even if host doesn't
support DMA. This is causing memory corruption when driver transfers
data using PIO. This change refactors the code to skip call to
PciIo->Map for non DMA transfers.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This patch refactors the way in which the driver will check
the data transfer completion. Data transfer related
functionalities have been moved to separate function.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SdMmcPciHcDxe driver used to read response only after
command and data transfer completed. According to SDHCI
specification response data is ready after the command
complete status is set by the host controller. Getting
the response data early will help debugging the cases
when command completed but data transfer timed out.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
To allow for easier debug of failing commands we
have added a capability to print TRB and command
packet when we start execution of the TRB(on
DEBUG_VERBOSE level) and when the TRB failed to
execute correctly(on DEBUG_ERROR level). Additionally
we will also print error interrupt status and interrupt
status register on failed SD command.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
To avoid stability issues on some designs the driver
will now send SEND_STATUS at previous, lower, frequency
when upgrading the bus timing.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1989
The commit will avoid unmapping the same resource in error handling logic
for function BuildAdmaDescTable() and SdMmcCreateTrb().
For the error handling in BuildAdmaDescTable():
The error is directly related with the corresponding Map() operation
(mapped address beyond 4G, which is not supported in ADMA), so the Unmap()
operation is done in the error handling logic, and then setting
'Trb->AdmaMap' to NULL to avoid double Unmap.
For the error handling in SdMmcCreateTrb():
The error is not directly related with the corresponding Map() operation,
so the commit will update the code to left SdMmcFreeTrb() for the Unmap
operation to avoid double Unmap.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2515
Change the MdeModulePkg to match the ECC check rule
Signed-off-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-23-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-22-philmd@redhat.com>
Fix few typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-21-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-20-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-16-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-15-philmd@redhat.com>
Fix various typos in documentation, comments and debug strings.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-14-philmd@redhat.com>
Fix few typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-13-philmd@redhat.com>
Fix various typos in documentation, comments and debug strings.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-12-philmd@redhat.com>
[lersek@redhat.com: replace EFI_D_xxx w/ DEBUG_xxx to shut up PatchCheck]
This patch adds retries for async execution for commands that
failed due to the CRC errors.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
To increase the resiliency driver will now attempt to
retry the commands that failed due to the CRC error up
to 5 times. This should address the problems with the commands
that fail due to random condition on links. This should also
help the boards on which CMD13 is particularly unstable after
switching the link frequency.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
Error detection function will now check if the command
failure has been caused by one of the errors that can
appear randomly on link(CRC error + end bit error). If
such an error has been a cause of failure, function will
return EFI_CRC_ERROR instead of EFI_DEVICE_ERROR to indicate
to the higher level that command has a chance of succeeding if
resent.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Driver used to reset the DAT lane on a current error which
is not required according to SD specification(it's not going
to help). This patch will reset the DAT lane only on DAT
lane specific errors.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Changed @rtval to @retval in SdMmcHcStartSdClock
function description.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
zhoucheng
Sumana Venur
Wenyi Xie
Sergei Dmitrouk
Rebecca Cran
Liming Gao
Bandaru, Purna Chandra Rao
Aiden Park
Zarcd Zhong
Luo, Heng
Michael D Kinney
Albecki, Mateusz
Jon Hunter
Patrick Henz
Jeff Brasen
Michael Kubacki
Laszlo Ersek
Guomin Jiang
Gaurav Jain
Hao A Wu
GuoMinJ
Antoine Coeur
Philippe Mathieu-Daudé