Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add
an additional check for ACPI version. This fixes a crash running on
kvmtool.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add support library to allow for customization of _OSC and slot info.
The functions in the library are unchanged,
with the exception of adding PciInfo pointer to the APIs.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for PCIe devices with UID > 0xF.
This is done by using the next value in the name so
PCI5, PC26, etc
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The translation value in ACPI should be the difference between the CPU and PCIe address.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Tested-by: Sunny Wang <sunny.wang@arm.com>
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbder are described in the _PRT entry.
The interrupt type is then assumed by the OS.
The Arm BSA, sE.6 "Legacy interrupts" states that PCI legacy
interrupts must be converted to SPIs, and programmed level-sensitive,
active high. Thus any OS must configure interrupts as such and there
is no need to specify the interrupt type.
Plus it is not possible to dynamically configure PCI interrupts.
Thus remove the link device generation and use the second model
for _PRT.
Suggested-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This generator allows to generate a SSDT table describing
a Pci express Bus. It uses the following CmObj:
- EArmObjCmRef
- EArmObjPciConfigSpaceInfo
- EArmObjPciAddressMapInfo
- EArmObjPciInterruptMapInfo
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3682
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the PPTT generator with the CacheId field as defined in table
5.140 of the ACPI 6.4 specification.
Also add validations to ensure that the cache id generated is unique.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the PPTT generator to use Acpi64.h.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
ACPI 6.3A deprecated PPTT ID (type 2) structure which was subsequently
removed in ACPI 6.4. Therefore remove support for generating PPTT ID
structures.
Mantis ID for removing PPTT type 2 structure:
2072 (https://mantis.uefi.org/mantis/view.php?id=2072)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the DynamicTablesPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In the GIC interrupt model, logical processors are required to
have a Processor Device object in the DSDT and must convey each
processor's GIC information to the OS using the GICC structure.
Additionally, _LPI objects may be needed as they provide a method
to describe Low Power Idle states that defines the local power
states for each node in a hierarchical processor topology.
Therefore, add support to generate the CPU topology and the LPI
state information in an SSDT table.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Buzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
As part of the updates to ACPI 6.4 the "SBSA Generic Watchdog" was
renamed to the "Arm Generic Watchdog". This patch implements that
change by updating the GTDT generator to use Acpi64.h and renames
any occurence of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Rework all the functions to to have a generic prototype:
- First take take the resource data specific arguments.
E.g.: for a Register(): the AddressSpace, BitWidth, ...
- The penultimate parameter is a NameOpNode. The resource data
created is appended to the ResourceTemplate() contained in the
NameOpNode.
- The last parameter is a pointer holding the created resource data.
A least one of the two last parameter must be provided. One of them can
be omitted. This generic interface allows to either:
- Add the resource data to a NameOpNode. This is a common case for the
Ssdt tables generator.
- Get the created resource data and let the caller place it in an AML
tree.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some functions in the AmlLib have 'Crs' in their name and can only
be applied to '_CRS' AML objects. To re-use them on AML objects that
have different names:
- Rename them and remove the '_CRS' name check.
- Create aliases having of the 'Crs' function prototypes. These
aliases are available when DISABLE_NEW_DEPRECATED_INTERFACES
is not defined. They will be deprecated in a near future.
The deprecated functions are:
- AmlNameOpCrsGetFirstRdNode()
- AmlNameOpCrsGetNextRdNode()
- AmlCodeGenCrsAddRdInterrupt()
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The TableHelperLib contains helper functions. Some rely on
DynamicTablesPkg definitions (they use Configuration Manager objects).
Some others are more generic.
To allow using these generic functions without including
DynamicTablesPkg definitions, move them to a new AcpiHelperLib
library.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Use the newly introduced defined value in:
MdePkg/Include/IndustryStandard/AcpiAml.h
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DBG2 table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the DBG2 generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the DBG2 table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SPCR table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the SPCR generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the SPCR table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in AcpiSratLibArm.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 Comment does NOT
have tail **/
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in SsdtSerialPortLibArm.
- [5007] There should be no initialization of a variable as part of
its declaration Variable Name.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reordered the asserts to first check if the pointer is valid
before de-referencing the pointer.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the DBG2 Generator to use the SSDT serial
port fixup library to build a serial port definition
block for the DBG2 serial port and install the
SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; the
SPCR console device must be included in the DSDT.
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the SPCR Generator to use the SSDT serial
port fixup library to build a serial port definition
block corresponding to the SPCR serial port and
install the SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Most platforms have several serial ports. These serial ports
are described to an operating system using definition block
tables.
The SSDT Serial Port Table Generator uses the Configuration
Manager protocol to obtain information for the Serial Ports
on the platform. The serial ports are described using the
CM_ARM_SERIAL_PORT_INFO structure. The EArmObjSerialPortInfo
ID is used to represent a standard serial port.
The SSDT Serial port fixup library provides interfaces to
generate a SSDT Serial port table based on the serial port
information. The SSDT Serial Port Table Generator uses the
SSDT serial port fixup library to build serial port
definition blocks and installs the SSDT tables.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The TianoCore EDKII project has introduced a Core CI infrastructure
using TianoCore EDKII Tools PIP modules:
* https://pypi.org/project/edk2-pytool-library/
* https://pypi.org/project/edk2-pytool-extensions/
More information on configuring the environment and running the
builds can be found in edk2\.pytool\Readme.md
This patch fixes the issues reported by the CI system mainly around
fixing typo errors and package dec and dsc files. A subsequent patch
enables the CI builds for the DynamicTablesPkg.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported for the Status variable in
AddGenericInitiatorAffinity() as it is not initialised
to a default value. This condition is only valid if
GenInitAffCount is equal to 0. Since GenInitAffCount
is already checked in BuildSratTable() this condition
can never happen.
The value of the Status variable is returned in
failure cases from appropriate locations in
AddGenericInitiatorAffinity(). The only case
where Status value is being used un-initialised
is the return statement at the end of
AddGenericInitiatorAffinity().
Therefore, to fix this issue EFI_SUCCESS can be
safely returned instead of returning the Status
variable at the end of the function.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the SRAT Generator modules.
Remove the CONST qualifier for the ImageHandle and the
SystemTable pointer in the library constructor and destructor
to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: 'return': conversion
from 'size_t' to 'UINT32', possible loss of data' for a number of
functions that compute the IORT node length. Similarly, it reports
warnings for IORT node length field assignments as the length
field is 16-bit wide.
This patch adds type casts at appropriate places and also implements
validations to ensure that the max width of the respective fields
is not exceeded.
This patch also fixes a typo in one of the local variable names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Removing GT Block frame count check from AddGTBlockTimerFrames()
as this is already validated in BuildGtdtTable().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ARM DCC serial port subtype is an option that is
supported by the DBG2 generator. However, the serial
port initialisation should only be done for PL011/SBSA
compatible UARTs.
Add check to conditionally initialise the serial port.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'warning C4366: The result of
the unary '&' operator may be unaligned' if an address of
an unaligned structure member is passed as an argument to
a function.
Fix this warning by using local variables in place of
unaligned structure members.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: '=': conversion from
'size_t' to 'UINT16', possible loss of data'.
The sizeof() operator is used to calculate the size of the
GT Block structure. The length field in the GT Block structure
is 16-bit wide. Since the return type of sizeof() operator
is size_t the VS2017 compiler reports the above warning.
To fix the warning, an explicit type cast is added. An additional
check is also performed to ensure that the calculated GT Block
length does not exceed MAX_UINT16.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The length field for the Processor Hierarchy node structure is
8-bit wide while the number of private resource field is 32-bit
wide. Therefore, the GetProcHierarchyNodeSize() returns the size
as a 32-bit value.
The VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT8', possible loss of data' while assigning the
length field of the Processor Hierarchy node structure.
To fix this, a type cast is added. In addition, there is a check
to ensure that the Processor Hierarchy node size does not exceed
MAX_UINT8.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion
from 'UINT16' to 'UINT8', possible loss of data' for the
SPCR InterfaceType field assignment.
The SPCR InterfaceType field uses the same encoding as that
of the DBG2 table Port Subtype field. However SPCR.InterfaceType
is 8-bit while the Port Subtype field in DBG2 table is 16-bit.
Since the Configuration Manager represents the Serial port
information using the struct CM_ARM_SERIAL_PORT_INFO, the
PortSubtype member in this struct is 16-bit.
To fix the warning an explicit type case is added. A validation
is also added to ensure that the Serial Port Subtype value
provided by the Configuration Manager is within the 8-bit
range (less than 256).
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The edk2 BaseTools report a warning if a local header file
is not listed under the [Sources] section in the INF file.
Add header files to the [Sources] section in the respective
INF files to fix the warnings.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the Generator modules. VS2017 compiler also
reports similar warnings for the DXE entry points.
Remove the CONST qualifier for the SystemTable pointer (the
second parameter to the constructor/destructor/DXE Entry
point) to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Edward Pickup
Sami Mujawar
Jeff Brasen
Pierre Gondois
Chris Jones
Michael Kubacki
Michael D Kinney
Joey Gouly