This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:1.Make the comments before Network definition align other parts.
2.Set NETWORK_ALLOW_HTTP_CONNECTIONS true.
3.Remove TcpIoLib in lib classes section.
4.Withdraw the removal of [PcdsFixedAtBuild.X64].
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-2-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit updates the OVMF DSC/FDF files to consume the copied
8259InterruptControllerDxe and 8254TimerDxe drivers within OvmfPkg.
The unconsumed PCD:
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel
is removed from DSC files as well.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
This commit will add a static build flag 'USE_LEGACY_ISA_STACK' to select
the ISA driver stack.
If the flag is set to TRUE, the below driver stack will be used:
PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
If the flag is set to FALSE, the below driver stack will be used:
OvmfPkg/SioBusDxe/SioBusDxe.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
The default value is set to FALSE in OVMF DSC files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
There is a plan to remove the IntelFrameworkModulePkg:
https://bugzilla.tianocore.org/show_bug.cgi?id=1605
And for driver:
IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe
This patch proposes to drop the ISA Floppy device support in OVMF.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1355
XCODE doesn't support HII resource section. TftpDynamicCommand driver depends
on HII resource section. To let OvmfPkg boot to shell on XCODE5 tool chain,
don't include TftpDynamicCommand driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove EdkShellBinPkg in OvmfPkgIa32.fdf,
OvmfPkg/OvmfPkgIa32X64.fdf amd OvmfPkg/OvmfPkgX64.fdf.
https://bugzilla.tianocore.org/show_bug.cgi?id=1108
v2: Remove USE_OLD_SHELL in DSC and FDF because it will be
unnecessary to use it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Almost exactly two years after commit 2f7b34b208, we've grown out the
10MB DXEFV:
> build -a IA32 -a X64 -p OvmfPkg/OvmfPkgIa32X64.dsc -b NOOPT -t GCC48 \
> -D SMM_REQUIRE -D SECURE_BOOT_ENABLE -D TLS_ENABLE -D E1000_ENABLE \
> -D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE
>
> [...]
>
> GenFv: ERROR 3000: Invalid
> the required fv image size 0xa28d48 exceeds the set fv image size
> 0xa00000
Raise the DXEFV size to 11MB.
(For builds that don't need this DXEFV bump, I've checked the
FVMAIN_COMPACT increase stemming from the additional 1MB padding, using
NOOPT + GCC48 + FD_SIZE_2MB, and no other "-D" flags. In the IA32 build,
FVMAIN_COMPACT grows by 232 bytes. In the IA32X64 build, FVMAIN_COMPACT
shrinks by 64 bytes. In the X64 build, FVMAIN_COMPACT shrinks by 376
bytes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxe were introduced to OvmfPkg
in March 2010, in adjacent commits b0f5144676 and efd82c5794. In the
past eight years, no driver or application seems to have materialized that
produced BLOCK_MMIO_PROTOCOL instances. Meanwhile the UEFI spec has
developed the EFI_RAM_DISK_PROTOCOL, which edk2 implements (and OVMF
includes) as RamDiskDxe.
Rather than fixing issues in the unused BlockMmioToBlockIoDxe driver,
remove the driver, together with the BLOCK_MMIO_PROTOCOL definition that
now becomes unused too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=926
Reported-by: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This module measures and log the boot environment. It also produces
the Tcg2 protocol, which allows for example to read the log from OS.
The linux kernel doesn't yet read the EFI_TCG2_EVENT_LOG_FORMAT_TCG_2,
which is required for crypto-agile log. In fact, only upcoming 4.16
adds support EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x3fa1f000 ACPI=0x3fbb6000 ACPI 2.0=0x3fbb6014 MEMATTR=0x3e7d4318 TPMEventLog=0x3db21018
$ python chipsec_util.py tpm parse_log binary_bios_measurements
[CHIPSEC] Version 1.3.5.dev2
[CHIPSEC] API mode: using OS native API (not using CHIPSEC kernel module)
[CHIPSEC] Executing command 'tpm' with args ['parse_log', '/tmp/binary_bios_measurements']
PCR: 0 type: EV_S_CRTM_VERSION size: 0x2 digest: 1489f923c4dca729178b3e3233458550d8dddf29
+ version:
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: fd39ced7c0d2a61f6830c78c7625f94826b05bcc
+ base: 0x820000 length: 0xe0000
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: 39ebc6783b72bc1e73c7d5bcfeb5f54a3f105d4c
+ base: 0x900000 length: 0xa00000
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x35 digest: 57cd4dc19442475aa82743484f3b1caa88e142b8
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 9b1387306ebb7ff8e795e7be77563666bbf4516e
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 9afa86c507419b8570c62167cb9486d9fc809758
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 5bf8faa078d40ffbd03317c93398b01229a0e1e0
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 734424c9fe8fc71716c42096f4b74c88733b175e
PCR: 7 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x3e digest: 252f8ebb85340290b64f4b06a001742be8e5cab6
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x6e digest: 22a4f6ee9af6dba01d3528deb64b74b582fc182b
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x80 digest: b7811d5bf30a7efd4e385c6179fe10d9290bb9e8
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x84 digest: 425e502c24fc924e231e0a62327b6b7d1f704573
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x9a digest: 0b5d2c98ac5de6148a4a1490ff9d5df69039f04e
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0xbd digest: 20bd5f402271d57a88ea314fe35c1705956b1f74
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x88 digest: df5d6605cb8f4366d745a8464cfb26c1efdc305c
PCR: 4 type: EV_EFI_ACTION size: 0x28 digest: cd0fdb4531a6ec41be2753ba042637d6e5f7f256
PCR: 0 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 2 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 3 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 4 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 5 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
$ tpm2_pcrlist
sha1 :
0 : 35bd1786b6909daad610d7598b1d620352d33b8a
1 : ec0511e860206e0af13c31da2f9e943fb6ca353d
2 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
3 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
4 : 45a323382bd933f08e7f0e256bc8249e4095b1ec
5 : d16d7e629fd8d08ca256f9ad3a3a1587c9e6cc1b
6 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
7 : 518bd167271fbb64589c61e43d8c0165861431d8
8 : 0000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000
sha256 :
0 : 9ae903dbae3357ac00d223660bac19ea5c021499a56201104332ab966631ce2c
1 : acc611d90245cf04e77b0ca94901f90e7fa54770f0426f53c3049b532243d1b8
2 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
3 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
4 : 7a94ffe8a7729a566d3d3c577fcb4b6b1e671f31540375f80eae6382ab785e35
5 : a5ceb755d043f32431d63e39f5161464620a3437280494b5850dc1b47cc074e0
6 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
7 : 65caf8dd1e0ea7a6347b635d2b379c93b9a1351edc2afc3ecda700e534eb3068
8 : 0000000000000000000000000000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000000000000000000000000000
sha384 :
The PhysicalPresenceLib is required, it sets some variables, but the
firmware doesn't act on it yet.
Laszlo Ersek explained on the list why Tpm2DeviceLib has to be
resolved differently for DXE_DRIVER modules in general and for
"Tcg2Dxe.inf" specifically:
* We have a library class called Tpm2DeviceLib -- this is basically the
set of APIs declared in "SecurityPkg/Include/Library/Tpm2DeviceLib.h".
Its leading comment says "This library abstract how to access TPM2
hardware device".
There are two *sets* of APIs in "Tpm2DeviceLib.h":
(a) functions that deal with the TPM2 device:
- Tpm2RequestUseTpm(),
- Tpm2SubmitCommand()
This set of APIs is supposed to be used by clients that *consume*
the TPM2 device abstraction.
(b) the function Tpm2RegisterTpm2DeviceLib(), which is supposed to be
used by *providers* of various TPM2 device abstractions.
* Then, we have two implementations (instances) of the Tpm2DeviceLib class:
(1) SecurityPkg/Library/Tpm2DeviceLibTcg2/Tpm2DeviceLibTcg2.inf
(2) SecurityPkg/Library/Tpm2DeviceLibRouter/Tpm2DeviceLibRouterDxe.inf
(1) The first library instance ("Tpm2DeviceLibTcg2.inf") implements the
APIs listed under (a), and it does not implement (b) -- see
EFI_UNSUPPORTED. In other words, this lib instance is strictly meant for
drivers that *consume* the TPM2 device abstraction. And, the (a) group
of APIs is implemented by forwarding the requests to the TCG2 protocol.
The idea here is that all the drivers that consume the TPM2 abstraction
do not have to be statically linked with a large TPM2 device library
instance; instead they are only linked (statically) with this "thin"
library instance, and all the actual work is delegated to whichever
driver that provides the singleton TCG2 protocol.
(2) The second library instance ("Tpm2DeviceLibRouterDxe.inf") is meant
for the driver that offers (produces) the TCG2 protocol. This lib
instance implements both (a) and (b) API groups.
* Here's how things fit together:
(i) The "SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2InstanceLibDTpm.inf"
library instance (which has no lib class) is linked into "Tcg2Dxe.inf"
via NULL class resolution. This simply means that before the
"Tcg2Dxe.inf" entry point function is entered, the constructor function
of "Tpm2InstanceLibDTpm.inf" will be called.
(ii) This Tpm2InstanceLibDTpmConstructor() function calls API (b), and
registers its own actual TPM2 command implementation with the
"Tpm2DeviceLibRouter" library instance (also linked into the Tcg2Dxe
driver). This provides the back-end for the API set (a).
TCG2 protocol provider (Tcg2Dxe.inf driver) launches
|
v
NULL class: Tpm2InstanceLibDTpm instance construction
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
backend registration for API set (a)
(iii) The Tcg2Dxe driver exposes the TCG2 protocol.
(iv) A TPM2 consumer calls API set (a) via lib instance (1). Such calls
land in Tcg2Dxe, via the protocol.
(v) Tcg2Dxe serves the protocol request by forwarding it to API set (a)
from lib instance (2).
(vi) Those functions call the "backend" functions registered by
Tpm2DeviceLibDTpm in step (ii).
TPM 2 consumer driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibTcg2 instance
|
v
TCG2 protocol interface
|
v
TCG2 protocol provider: Tcg2Dxe.inf driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
|
v
NULL class: Tpm2InstanceLibDTpm instance
(via earlier registration)
|
v
TPM2 chip (actual hardware)
* So that is the "router" pattern in edk2. Namely,
- Consumers of an abstraction use a thin library instance.
- The thin library instance calls a firmware-global (singleton) service,
i.e. a PPI (in the PEI phase) or protocol (in the DXE phase).
- The PEIM providing the PPI, or the DXE driver providing the protocol,
don't themselves implement the actual service either. Instead they
offer a "registration" service too, and they only connect the incoming
"consumer" calls to the earlier registered back-end(s).
- The "registration service", for back-ends to use, may take various
forms.
It can be exposed globally to the rest of the firmware, as
another member function of the PPI / protocol structure. Then backends
can be provided by separate PEIMs / DXE drivers.
Or else, the registration service can be exposed as just another
library API. In this case, the backends are provided as NULL class
library instances, and a platform DSC file links them into the PEIM /
DXE driver via NULL class resolutions. The backend lib instances call
the registration service in their own respective constructor
functions.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module will initialize TPM device, measure reported FVs and BIOS
version. We keep both SHA-1 and SHA-256 for the TCG 1.2 log format
compatibility, but the SHA-256 measurements and TCG 2 log format are
now recommended.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Tcg2ConfigPei module informs the firmware globally about the TPM
device type, by setting the PcdTpmInstanceGuid PCD to the appropriate
GUID value. The original module under SecurityPkg can perform device
detection, or read a cached value from a non-volatile UEFI variable.
OvmfPkg's clone of the module only performs the TPM2 hardware detection.
This is what the module does:
- Check the QEMU hardware for TPM2 availability only
- If found, set the dynamic PCD "PcdTpmInstanceGuid" to
&gEfiTpmDeviceInstanceTpm20DtpmGuid. This is what informs the rest of
the firmware about the TPM type.
- Install the gEfiTpmDeviceSelectedGuid PPI. This action permits the
PEI_CORE to dispatch the Tcg2Pei module, which consumes the above PCD.
In effect, the gEfiTpmDeviceSelectedGuid PPI serializes the setting
and the consumption of the "TPM type" PCD.
- If no TPM2 was found, install gPeiTpmInitializationDonePpiGuid.
(Normally this is performed by Tcg2Pei, but Tcg2Pei doesn't do it if
no TPM2 is available. So in that case our Tcg2ConfigPei must do it.)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The TFTP command was converted from a NULL class library instance
to a dynamic shell command in commit 0961002352.
This patch complements commit f9bc2f8763, which only removed the
old library, but didn't add the new dynamic command。
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
(1) In the PEI phase, the PCD database is maintained in a GUID HOB. In
OVMF, we load the PCD PEIM before any other PEIMs (using APRIORI PEI),
so that all other PEIMs can use dynamic PCDs. Consequently,
- the PCD GUID HOB is initially allocated from the temporary SEC/PEI
heap,
- whenever we introduce a dynamic PCD to a PEIM built into OVMF such
that the PCD is new to OVMF's whole PEI phase, the PCD GUID HOB (and
its temporary heap footprint) grow.
I've noticed that, if we add just one more dynamic PCD to the PEI
phase, then in the X64 build,
- we get very close to the half of the temporary heap (i.e., 8192
bytes),
- obscure PEI phase hangs or DXE core initialization failures
(ASSERTs) occur. The symptoms vary between the FD_SIZE_2MB and
FD_SIZE_4MB builds of X64 OVMF.
(2) I've found that commit
2bbd7e2fbd ("UefiCpuPkg/MtrrLib: Update algorithm to calculate
optimal settings", 2017-09-27)
introduced a large (16KB) stack allocation:
> The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
> MtrrSetMemoryAttribute() to use the 4-page stack buffer for calculation.
> ...
> +#define SCRATCH_BUFFER_SIZE (4 * SIZE_4KB)
> ...
> @@ -2207,17 +2462,66 @@ MtrrSetMemoryAttributeInMtrrSettings (
> ...
> + UINT8 Scratch[SCRATCH_BUFFER_SIZE];
(3) OVMF's temp SEC/PEI RAM size has been 32KB ever since commit
7cb6b0e068 ("OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to
0x810000", 2014-01-21)
Of that, the upper 16KB half is stack (growing down), and the lower
16KB half is heap.
Thus, OvmfPkg/PlatformPei's calls to "UefiCpuPkg/Library/MtrrLib", in
QemuInitializeRam(), cause the Scratch array to overflow the entire
stack (heading towards lower addresses), and corrupt the heap below
the stack. It turns out that the total stack demand is about 24KB, so
the overflow is able to corrupt the upper 8KB of the heap. If that
part of the heap is actually used (for example because we grow the PCD
GUID HOB sufficiently), mayhem ensues.
(4) Right after commit 7cb6b0e068 (see above), there would be no room
left above the 32KB temp SEC/PEI RAM. However, given more recent
commits
45d8708151 ("OvmfPkg/PlatformPei: rebase and resize the permanent
PEI memory for S3", 2016-07-13)
6b04cca4d6 ("OvmfPkg: remove PcdS3AcpiReservedMemoryBase,
PcdS3AcpiReservedMemorySize", 2016-07-12)
we can now restore the temp SEC/PEI RAM size to the original
(pre-7cb6b0e06809) 64KB. This will allow for a 32KB temp SEC/PEI
stack, which accommodates the ~24KB demand mentioned in (3).
(Prior patches in this series will let us monitor the stack usage in
the future.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747
Ref: http://mid.mail-archive.com/a49cc089-12ae-a887-a4d6-4dc509233a74@redhat.com
Ref: http://mid.mail-archive.com/03e369bb-77c4-0134-258f-bdae62cbc8c5@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch enables UDF file system support by default.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
Due to security reasons all DMA operations inside the SEV guest must
be performed on shared (i.e unencrypted) pages. The IOMMU protocol
driver for the SEV guest uses a bounce buffer to map guest DMA buffer
to shared pages inorder to provide the support for DMA operations inside
SEV guest.
IoMmuDxe driver looks for SEV capabilities, if present then it installs
the real IOMMU protocol otherwise it installs placeholder protocol.
Currently, PciHostBridgeDxe and QemuFWCfgLib need to know the existance
of IOMMU protocol. The modules needing to know the existance of IOMMU
support should add
gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid
in their depex to ensure that platform IOMMU detection has been performed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Jiaxin reports that the OvmfPkg/README instructions for downloading the
Intel PROEFI drivers, and the filenames in OvmfPkg/OvmfPkg*.fdf for
incorporating the same in the OVMF binaries, are no longer up to date; the
download link has stopped working.
Additionally, the IA32 driver binary is no more distributed by Intel.
Update OvmfPkg/README with new download instructions, and adapt the OVMF
FDF files.
With this driver in use for QEMU's e1000 NIC, the DH shell command prints,
as Controller Name, "Intel(R) PRO/1000 MT Network Connection". I
successfully tested DHCP and ping from the UEFI shell.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jiaxin Wu <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=613
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
When the GenFv utility from BaseTools composes a firmware volume, it
checks whether modules in the firmware volume are subject to build-time
relocation. The primary indication for relocation is whether the firmware
volume has a nonzero base address, according to the [FD] section(s) in the
FDF file that refer to the firmware volume.
The idea behind build-time relocation is that XIP (execute in place)
modules will not be relocated at boot-time:
- Pre-DXE phase modules generally execute in place.
(OVMF is no exception, despite the fact that we have writeable memory
even in SEC: PEI_CORE and PEIMs run in-place from PEIFV, after SEC
decompresses PEIFV and DXEFV from FVMAIN_COMPACT (flash) to RAM.
PEI_CORE and the PEIMs are relocated at boot-time only after PlatformPei
installs the permanent PEI RAM, and the RAM migration occurs.)
- Modules dispatched by the DXE Core are generally relocated at boot-time.
However, this is not necessarily so. Quoting Liming from
<https://lists.01.org/pipermail/edk2-devel/2017-July/012053.html>:
> PI spec has no limitation that XIP is for PEIM only. DXE driver may be
> built as XIP for other purpose. For example, if DXE driver image address
> is not zero, DxeCore will try allocating the preferred address and load
> it. In another case, once DXE driver is relocated at build time, DxeCore
> will dispatch it and start it directly without loading, it may save boot
> performance.
Therefore GenFv relocates even DXE and UEFI driver modules if the
containing firmware volume has a nonzero base address.
In OVMF, this is the case for both PEIV and DXEFV:
> [FD.MEMFD]
> BaseAddress = $(MEMFD_BASE_ADDRESS)
> Size = 0xB00000
> ErasePolarity = 1
> BlockSize = 0x10000
> NumBlocks = 0xB0
> ...
> 0x020000|0x0E0000
> gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
> FV = PEIFV
>
> 0x100000|0xA00000
> gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
> FV = DXEFV
While the build-time relocation certainly makes sense for PEIFV (see
above), the reasons for which we specify DXEFV under [FD.MEMFD] are
weaker:
- we set the PcdOvmfDxeMemFvBase and PcdOvmfDxeMemFvSize PCDs here,
- and we ascertain that DXEFV, when decompressed by SEC from
FVMAIN_COMPACT, will fit into the area allotted here, at build time.
In other words, the build-time relocation of the modules in DXEFV is a
waste of resources. But, it gets worse:
Build-time relocation of an executable is only possible if the on-disk and
in-memory layouts are identical, i.e., if the sections of the PE/COFF
image adhere to the same alignment on disk and in memory. Put differently,
the FileAlignment and SectionAlignment headers must be equal.
For boot-time modules that we build as part of edk2, both alignment values
are 0x20 bytes. For runtime modules that we build as part of edk2, both
alignment values are 0x1000 bytes. This is why the DXEFV relocation,
albeit wasteful, is also successful every time.
Unfortunately, if we try to include a PE/COFF binary in DXEFV that
originates from outside of edk2, the DXEFV relocation can fail due to the
binary having unmatched FileAlignment and SectionAlignment headers. This
is precisely the case with the E3522X2.EFI network driver for the e1000
NIC, from Intel's BootUtil / PREBOOT.EXE distribution.
The solution is to use the FvForceRebase=FALSE override under [FV.DXEFV].
This tells GenFv not to perform build-time relocation on the firmware
volume, despite the FV having a nonzero base address.
In DXEFV we also have SMM drivers. Those are relocated at boot-time (into
SMRAM) unconditionally; SMRAM is always discovered at boot-time.
Kudos to Ard and Liming for the PE/COFF sections & relocations
explanation, and for the FvForceRebase=FALSE tip.
I regression-tested this change in the following configurations (all with
normal boot and S3 suspend/resume):
IA32, q35, SMM, Linux
IA32X64, q35, SMM, Linux
IA32X64, q35, SMM, Windows-8.1
X64, i440fx, no-SMM, Linux
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=613
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=615
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
This commit introduces a new build option, TLS_ENABLE, to pull in the
TLS-related modules. If HTTP_BOOT_ENABLE and TLS_ENABLE are enabled at
the same time, the HTTP driver locates the TLS protocols automatically
and thus HTTPS is enabled.
To build OVMF with HTTP Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE
To build OVMF with HTTPS Boot:
$ ./build.sh -D HTTP_BOOT_ENABLE -D TLS_ENABLE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Always use IScsiDxe from NetworkPkg when IPv6 is enabled since it provides
the complete ISCSI support.
NOTE: This makes OpenSSL a hard requirement when NETWORK_IP6_ENABLE is
true.
(Based on Jiaxin's suggestion)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
While debugging OS for ACPI BGRT support (especially on VMs),
it is very useful to have the EFI firmware (OVMF in most cases
which use Tianocore) to export the ACPI BGRT table.
This patch tries to add this support in OvmfPkg.
Tested this patch in the following environments:
1. On both RHEL7.3 and Fedora-25 VM guests running on a Fedora-24 Host:
- Ensured that the BGRT logo is properly prepared and
can be viewed with user-space tools (like 'Gwenview' on KDE,
for example):
$ file /sys/firmware/acpi/bgrt/image
/sys/firmware/acpi/bgrt/image: PC bitmap, Windows 3.x format, 193 x
58 x 24
2. On a Windows-10 VM Guest running on a Fedora-24 Host:
- Ensured that the BGRT ACPI table is properly prepared and can be
read with freeware tool like FirmwareTablesView:
==================================================
Signature : BGRT
Firmware Provider : ACPI
Length : 56
Revision : 1
Checksum : 129
OEM ID : INTEL
OEM Table ID : EDK2
OEM Revision : 0x00000002
Creator ID : 0x20202020
Creator Revision : 0x01000013
Description :
==================================================
Note from Laszlo Ersek <lersek@redhat.com>: without the BGRT ACPI table,
Windows 8 and Windows 10 first clear the screen, then display a blue,
slanted Windows picture above the rotating white boot animation. With the
BGRT ACPI table, Windows 8 and Windows 10 don't clear the screen, the blue
Windows image is not displayed, and the rotating white boot animation is
shown between the firmware's original TianoCore boot splash and (optional)
"Start boot option" progress bar.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: cover effect on Windows 8/10 boot anim. in commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
At this stage, the driver builds, and suffices for testing binding and
unbinding.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the Platform Init v1.4a spec,
- Volume 1 "4.7 Status Code Service" defines the
EFI_PEI_SERVICES.ReportStatusCode() service,
- Volume 1 "6.3.5 Status Code PPI (Optional)" defines the
EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above),
- Volume 2 "14.2 Status Code Runtime Protocol" defines the
EFI_STATUS_CODE_PROTOCOL.
These allow PEIMs and DXE (and later) modules to report status codes.
Currently OvmfPkg uses modules from under
"IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above
abstractions (PPI and PROTOCOL) directly, and write the status codes, as
they are reported, to the serial port or to a memory buffer. This is
called "handling" the status codes.
In the Platform Init v1.4a spec,
- Volume 3 "7.2.2 Report Status Code Handler PPI" defines
EFI_PEI_RSC_HANDLER_PPI,
- Volume 3 "7.2.1 Report Status Code Handler Protocol" defines
EFI_RSC_HANDLER_PROTOCOL.
These allow several PEIMs and runtime DXE drivers to register callbacks
for status code handling.
MdeModulePkg offers a PEIM under
"MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both
EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE
driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe"
that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL.
MdeModulePkg also offers status code handler modules under
MdeModulePkg/Universal/StatusCodeHandler/ that depend on
EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively.
The StatusCodeHandler modules register themselves with
ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI /
EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code
through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches
the phase-matching ReportStatusCodeRouter module first, which in turn
passes the status code to the pre-registered, phase-matching
StatusCodeHandler module.
The status code handling in the StatusCodeHandler modules is identical to
the one currently provided by the IntelFrameworkModulePkg modules. Replace
the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can
decrease our dependency on IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Suggested-by: Liming Gao <liming.gao@intel.com>
Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63
[jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos]
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
In the next patch we're going to put EFI_PEI_MP_SERVICES_PPI to use.
CpuMpPei uses the following PCDs from gUefiCpuPkgTokenSpaceGuid, beyond
those already used by CpuDxe:
- PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize: these
control whether CpuMpPei performs microcode update. If the region size
is zero, then the microcode update is skipped. UefiCpuPkg.dec sets the
region size to zero by default, which is appropriate for OVMF.
- PcdCpuApLoopMode and PcdCpuApTargetCstate: the former controls how
CpuMpPei puts the APs to sleep: 1 -- HLT, 2 -- MWAIT, 3 -- busy wait
(with PAUSE). The latter PCD is only relevant if the former PCD is 2
(MWAIT). In order to be consistent with SeaBIOS and with CpuDxe itself,
we choose HLT. That's the default set by UefiCpuPkg.dec.
Furthermore, although CpuMpPei could consume SecPeiCpuExceptionHandlerLib
technically, it is supposed to consume PeiCpuExceptionHandlerLib. See:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/12703
- git commit a81abf1616 ("UefiCpuPkg/ExceptionLib: Import
PeiCpuExceptionHandlerLib module"), part of the series linked above.
Jeff recommended to resolve CpuExceptionHandlerLib to
PeiCpuExceptionHandlerLib for all PEIMs:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/14471/focus=14477
Since at the moment we have no resolution in place that would cover this
for PEIMs (from either [LibraryClasses] or [LibraryClasses.common.PEIM]),
it's easy to do.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
No module in OvmfPkg uses these PCDs any longer.
The first PCD mentioned is declared by OvmfPkg, so we can remove even the
declaration.
The second PCD comes from IntelFrameworkModulePkg. The module that
consumes PcdS3AcpiReservedMemorySize is called
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe", and it is built
into OVMF. However, AcpiS3SaveDxe consumes the PCD only conditionally: it
depends on the feature PCD called PcdFrameworkCompatibilitySupport, which
we never enable in OVMF.
The 32KB gap that used to be the S3 permanent PEI memory is left unused in
MEMFD for now; it never hurts to have a few KB available there, for future
features.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
After IncompatiblePciDeviceSupportDxe, this is another small driver /
protocol implementation that tweaks the behavior of the PCI bus driver in
edk2.
The protocol is specified in the Platform Init Spec v1.4a, Volume 5,
Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This
implementation steers the PCI bus driver to reserve the following
resources ("padding") for each PCI bus, in addition to the BARs of the
devices on that PCI bus:
- 2MB of 64-bit non-prefetchable MMIO aperture,
- 512B of IO port space.
The goal is to reserve room for devices hot-plugged at runtime even if the
bridge receiving the device is empty at boot time.
The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is
actually only 1/8th of the PCI spec mandated reservation, but the
specified size of 4096 has proved wasteful (given the limited size of our
IO port space -- see commit bba734ab4c). Especially on Q35, where every
PCIe root port and downstream port qualifies as a separate bridge (capable
of accepting a single device).
Test results for this patch:
- regardless of our request for 64-bit MMIO reservation, it is downgraded
to 32-bit,
- although we request 512B alignment for the IO port space reservation,
the next upstream bridge rounds it up to 4096B.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but
the detailed description can be found in Volume 3 of the Platform Init
spec (which is at 1.4a currently).
Adding an FvNameGuid statement to [FV.xxx] has the following effects
(implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"):
- The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero
value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not
directly, see below).
- An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to
address. This object is not followed by any
EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only
specifies the Name GUID for the firmware volume.
The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found
in the Build directory as a separate file (20 bytes in size):
Build/Ovmf*/*_GCC*/FV/*.ext
- The new data consume 48 bytes in the following volumes: SECFV,
FVMAIN_COMPACT, DXEFV. They comprise:
- 16 padding bytes,
- EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize
fields, and Type=EFI_FV_FILETYPE_FFS_PAD),
- EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above),
- 4 padding bytes.
(The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are
the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point
immediately past EFI_FIRMWARE_VOLUME_HEADER.)
The sizes of the firmware volumes don't change, only their internal
usages grow by 48 bytes. I verified that the statements and calculations
in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid.
- The new data consume 0 bytes in PEIFV. This is because PEIFV has enough
internal padding at the moment to accomodate the above structures
without a growth in usage.
In the future, firmware volumes can be identified by Name GUID (Fv(...)
device path nodes), rather than memory location (MemoryMapped(...) device
path nodes). This is supposed to improve stability for persistent device
paths that refer to FFS files; for example, UEFI boot options.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The Driver Health HII menu is not an integral part of the MdeModulePkg BDS
driver / UI app. Because we abandoned the IntelFrameworkModulePkg BDS, now
we have to get the same functionality explicitly from
DriverHealthManagerDxe.
Suggested-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
We reached the size limit again.
Building OVMF with the following command
$ ./OvmfPkg/build.sh -D SECURE_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D HTTP_BOOT_ENABLE
and it ended up with
GenFds.py...
GenFv: ERROR 3000: Invalid
: error 7000: Failed to generate FV
the required fv image size 0x900450 exceeds the set fv image size 0x900000
Since the new UEFI features, such as HTTPS, are coming, we need a
larger DEXFV eventually.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to edk2 commit
"MdeModulePkg/PciBus: do not improperly degrade resource"
and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the
Platform Init 1.4a specification, a platform can provide such a protocol
in order to influence the PCI resource allocation performed by the PCI Bus
driver.
In particular it is possible instruct the PCI Bus driver, with a
"wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit
address space, regardless of whether the device features an option ROM.
(By default, the PCI Bus driver considers an option ROM reason enough for
allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if
BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS
binary from a combined option ROM could be dispatched, and fail to access
MMIO BARs in 64-bit address space.)
In platform code we can ascertain whether a CSM is present or not. If not,
then legacy BIOS binaries in option ROMs can't be dispatched, hence the
BAR degradation is detrimental, and we should prevent it. This is expected
to conserve the 32-bit address space for 32-bit MMIO BARs.
The driver added in this patch could be simplified based on the following
facts:
- In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence
the driver will exit immediately. Therefore the driver could be omitted
from the Ia32 build.
- In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE
was defined (because in that case the degradation would be justified).
On the other hand, if CSM_ENABLE was undefined, then the driver could be
included, and it could provide the hint unconditionally (without looking
for the Legacy BIOS protocol).
These short-cuts are not taken because they would increase the differences
between the OVMF DSC/FDF files. If we can manage without extreme
complexity, we should use dynamic logic (vs. build time configuration),
plus keep conditional compilation to a minimum.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reasons:
- USE_OLD_BDS requires duplicating updates between OVMF's library
instances that depend on USE_OLD_BDS being FALSE vs. TRUE. Examples:
d5aee61bfa OvmfPkg/QemuNewBootOrderLib: adapt Q35 SATA PMPN to UEFI
spec Mantis 1353
1da7616649 OvmfPkg/QemuBootOrderLib: adapt Q35 SATA PMPN to UEFI spec
Mantis 1353
- The Xen community has embraced the new BDS. Examples:
14b2ebc30c OvmfPkg/PlatformBootManagerLib: Postpone the shell
registration
49effaf26e OvmfPkg/PciHostBridgeLib: Scan for root bridges when
running over Xen
- OVMF doesn't build with "-D USE_OLD_BDS -D HTTP_BOOT_ENABLE" anyway, as
NetworkPkg/HttpBootDxe now requires UefiBootManagerLib:
50a65824c7 NetworkPkg: Use UefiBootManagerLib API to create load
option.
We (correctly) don't resolve UefiBootManagerLib when USE_OLD_BDS is
TRUE.
- The new BDS has been working well; for example it's the only BDS
available in ArmVirtPkg:
1946faa710 ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The RamDiskDxe driver in MdeModulePkg now will use EFI_ACPI_TABLE_PROTOCOL
and EFI_ACPI_SDT_PROTOCOL during reporting RAM disks to NVDIMM Firmware
Interface Table (NFIT).
A Pcd 'PcdInstallAcpiSdtProtocol' controls whether the
EFI_ACPI_SDT_PROTOCOL will be produced. Its default value is set to FALSE
in MdeModulePkg. To make the NFIT reporting feature working properly under
OVMF, the patch will set the Pcd to TRUE in OVMF DSC files.
Also, the RamDiskDxe driver will sometimes report a NVDIMM Root Device
using ASL code which is put in a Secondary System Description Table (SSDT)
according to the ACPI 6.1 spec.
Locating the SSDT requires modifying the [Rule.Common.DXE_DRIVER] field in
OVMF FDF files.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
By default the new MdeModulePkg/BDS is used.
If USE_OLD_BDS is defined to TRUE, IntelFrameworkModulePkg/BDS
is used.
Fixes: https://github.com/tianocore/edk2/issues/62
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It's been a month since the following commits appeared in the repo:
4014885ffd OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
c47ed6fcb5 OvmfPkg: match PCI config access to machine type (if not
USE_OLD_PCI_HOST)
in which we introduced the USE_OLD_PCI_HOST fallback, and made other work
depend on it. I have not heard of any problems (primarily from the
vfio-users group that uses Gerd's daily / hourly OVMF builds), so it's
time to drop the fallback.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Build tested with GCC 5.3 on IA32 and X64. Boot tested to UEFI Shell
on IA32 and UEFI Linux on X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The same functional code has been in S3SaveStateDxe,
OVMF AcpiS3SaveDxe can be retired now.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently booting off of a RAM disk is not supported by
IntelFrameWorkModulePkg BDS, however on systems without writable
disks, the RAM disk can be made useful when loading raw HDD images
into it -- specially the ones with a FAT32 partition on which files
can be natively accessed by system firmware.
This patch adds RamDiskDxe driver by default in OVMF platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The old driver is retained for now; it remains available with "-D
USE_OLD_PCI_HOST". This is because I'd like to involve end users and
downstreams in testing the new drier, but also allow them to switch back
to the old driver at the first sight of trouble, while we debug the new
driver in parallel.
In a few weeks the ifdeffery and the "OvmfPkg/PciHostBridgeDxe/" driver
should be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This adds the new Virtio-RNG DXE module to all three builds of
OvmfPkg. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QEMU emulates NVMe. NvmExpressDxe seems to work well with it. The relevant
QEMU options are
-drive id=drive0,if=none,format=FORMAT,file=PATHNAME \
-device nvme,drive=drive0,serial=SERIAL
where the required SERIAL value sets the Serial Number (SN) field of the
"Identify Controller Data Structure". It is an ASCII string with up to 20
characters, which QEMU pads with spaces to maximum length.
(Refer to "NVME_ADMIN_CONTROLLER_DATA.Sn" in
"MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.h".)
Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reference: https://github.com/tianocore/edk2/issues/48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19791 6f19259b-4bc3-4df7-8a09-765794883524
When -D SMM_REQUIRE is given, replace both
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf and
- OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
with
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf.
The outermost (= runtime DXE driver) VariableSmmRuntimeDxe enters SMM, and
the rest:
- the privileged half of the variable driver, VariableSmm,
- the fault tolerant write driver, FaultTolerantWriteSmm,
- and the FVB driver, FvbServicesSmm,
work in SMM purely.
We also resolve the BaseCryptLib class for DXE_SMM_DRIVER modules, for the
authenticated VariableSmm driver's sake.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19065 6f19259b-4bc3-4df7-8a09-765794883524
The following modules constitute the variable driver stack:
- QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, runtime
alternatives for providing the Firmware Volume Block(2) Protocol,
dependent on qemu pflash presence,
- FaultTolerantWriteDxe, providing the Fault Tolerant Write Protocol,
- MdeModulePkg/Universal/Variable/RuntimeDxe, independently of
-D SECURE_BOOT_ENABLE, providing the Variable and Variable Write
Architectural Protocols.
Let's move these drivers closer to each other in the DSC and FDF files, so
that we can switch the variable driver stack to SMM with more local
changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19064 6f19259b-4bc3-4df7-8a09-765794883524
At this point we can enable building PiSmmCpuDxeSmm.
CPU specific features, like SMRR detection, and functions that are used to
initialize SMM and process SMIs, are abstracted through the
SmmCpuFeaturesLib class for the PiSmmCpuDxeSmm module. Resolve it to our
own implementation under OvmfPkg -- it allows PiSmmCpuDxeSmm to work with
QEMU's and KVM's 64-bit state save map format, which follows the
definition from AMD's programmer manual.
SmmCpuPlatformHookLib provides platform specific functions that are used
to initialize SMM and process SMIs. Resolve it to the one Null instance
provided by UefiCpuPkg, which is expected to work for most platforms.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[pbonzini@redhat.com: resolve the SmmCpuFeaturesLib class to OVMF's own
instance]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19061 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm driver from UefiCpuPkg depends on the ACPI_CPU_DATA
structure -- created by a platform- and CPU-specific driver -- in order to
support ACPI S3. The address of this structure is communicated through the
dynamic PCD PcdCpuS3DataAddress.
The "UefiCpuPkg/Include/AcpiCpuData.h" header file documents the fields of
this structure in detail.
The simple/generic "UefiCpuPkg/CpuS3DataDxe" driver creates and populates
the structure in a conformant way, and it co-operates well with
PiSmmCpuDxeSmm, for OVMF's purposes.
PlatformBdsLib CpuS3DataDxe PiSmmCpuDxeSmm S3Resume2Pei
(DXE_DRIVER) (DXE_DRIVER) (DXE_SMM_DRIVER) (PEIM)
-------------- --------------- ---------------- --------------
normal collects data
boot except MTRR
settings into
ACPI_CPU_DATA
sets
PcdCpuS3Da...
signals
End-of-Dxe
|
+----------> collects MTRR
settings into
ACPI_CPU_DATA
installs
[Dxe]Smm
ReadyToLock
|
+---------------------------> fetches
PcdCpuS3Dat...
copies
ACPI_CPU_DATA
into SMRAM
runtime
S3
suspend
S3 transfers
resume control to
PiSmmCpuDxe...
|
uses <----+
ACPI_CPU_DATA
from SMRAM
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19060 6f19259b-4bc3-4df7-8a09-765794883524
During DXE, drivers save data in the LockBox. A save operation is layered
as follows:
- The unprivileged driver wishing to store data in the LockBox links
against the "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf"
library instance.
The library allows the unprivileged driver to format requests for the
privileged SMM LockBox driver (see below), and to parse responses.
We apply this resolution for DXE_DRIVER modules.
- The privileged SMM LockBox driver is built from
"MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf". This driver
has module type DXE_SMM_DRIVER and can access SMRAM.
The driver delegates command parsing and response formatting to
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf".
Therefore we include this DXE_SMM_DRIVER in the build, and apply said
resolution specifically to it.
(Including the driver requires us to resolve a few of other library
classes for DXE_SMM_DRIVER modules.)
- In PEI, the S3 Resume PEIM (UefiCpuPkg/Universal/Acpi/S3Resume2Pei)
retrieves data from the LockBox. It is capable of searching SMRAM
itself.
We resolve LockBoxLib to
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" specifically
for this one PEIM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19048 6f19259b-4bc3-4df7-8a09-765794883524
This driver provides EFI_SMM_CPU_IO2_PROTOCOL, which the SMM core depends
on in its gEfiDxeSmmReadyToLockProtocolGuid callback
(SmmReadyToLockHandler(), "MdeModulePkg/Core/PiSmmCore/PiSmmCore.c").
Approached on a higher level, this driver provides the SmmIo member of the
EFI_SMM_SYSTEM_TABLE2 (SMST).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19044 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf" (a DXE_RUNTIME_DRIVER)
implements the SMM Initial Program Loader. It produces
EFI_SMM_BASE2_PROTOCOL and EFI_SMM_COMMUNICATION_PROTOCOL, relying on:
- EFI_SMM_ACCESS2_PROTOCOL
(provided by OvmfPkg/SmmAccess/SmmAccess2Dxe.inf),
- EFI_SMM_CONTROL2_PROTOCOL
(provided by OvmfPkg/SmmControl2Dxe/SmmControl2Dxe.inf).
(The SMM IPL also depends on EFI_SMM_CONFIGURATION_PROTOCOL_GUID, but this
dependency is not enforced in the entry point. A protocol notify callback
is registered instead, hence we can delay providing that protocol via the
PiSmmCpuDxeSmm driver that is (to be) imported from UefiCpuPkg/.)
The SMM IPL loads the SMM core into SMRAM and executes it from there.
Therefore we add the SMM core to the build as well.
For the SMM core, a number of library classes need to be resolved.
Furthermore, each FDF file must provide the GenFds.py BaseTools utility
with a build rule for SMM_CORE; we copy the DXE_CORE's rule.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19043 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_SMM_COMMUNICATION_PROTOCOL implementation that is provided by the
SMM core depends on EFI_SMM_CONTROL2_PROTOCOL; see the
mSmmControl2->Trigger() call in the SmmCommunicationCommunicate() function
[MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c].
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19042 6f19259b-4bc3-4df7-8a09-765794883524
The SMM core depends on EFI_SMM_ACCESS2_PROTOCOL. This small driver (which
is a thin wrapper around "OvmfPkg/SmmAccess/SmramInternal.c" that was
added in the previous patch) provides that protocol.
Notably, EFI_SMM_ACCESS2_PROTOCOL is for boot time only, therefore
our MODULE_TYPE is not DXE_RUNTIME_DRIVER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19041 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" is the
LockBoxLib instance with SMRAM access for the PEI phase.
Said library instance must, and can, access the LockBox data in SMRAM
directly if it is invoked before SMBASE relocation / SMI handler
installation. In that case, it only needs PEI_SMM_ACCESS_PPI from the
platform, and it doesn't depend on EFI_PEI_SMM_COMMUNICATION_PPI.
OVMF satisfies the description in SVN r18823 ("MdeModulePkg:
SmmLockBoxPeiLib: work without EFI_PEI_SMM_COMMUNICATION_PPI"): in OVMF,
only S3Resume2Pei links against SmmLockBoxPeiLib.
Therefore, introduce a PEIM that produces the PEI_SMM_ACCESS_PPI
interface, enabling SmmLockBoxPeiLib to work; we can omit including
"UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf".
The load / installation order of S3Resume2Pei and SmmAccessPei is
indifferent. SmmAccessPei produces the gEfiAcpiVariableGuid HOB during its
installation (which happens during PEI), but S3Resume2Pei accesses the HOB
only when the DXE IPL calls its S3RestoreConfig2 PPI member, as last act
of PEI.
MCH_SMRAM_D_LCK and MCH_ESMRAMC_T_EN are masked out the way they are, in
SmmAccessPeiEntryPoint() and SmramAccessOpen() respectively, in order to
prevent VS20xx from warning about the (otherwise fully intentional)
truncation in the UINT8 casts. (Warnings reported by Michael Kinney.)
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19040 6f19259b-4bc3-4df7-8a09-765794883524
The DecompressMemFvs() function in "OvmfPkg/Sec/SecMain.c" uses more
memory, temporarily, than what PEIFV and DXEFV will ultimately need.
First, it uses an output buffer for decompression, second, the
decompression itself needs a scratch buffer (and this scratch buffer is
the highest area that SEC uses).
DecompressMemFvs() used to be called on normal boots only (ie. not on S3
resume), which is why the decompression output buffer and the scratch
buffer were allowed to scribble over RAM. However, we'll soon start to
worry during S3 resume that the runtime OS might tamper with the
pre-decompressed PEIFV, and we'll decompress the firmware volumes on S3
resume too, from pristine flash. For this we'll need to know the end of
the scratch buffer in advance, so we can prepare a non-malicious OS for
it.
Calculate the end of the scratch buffer statically in the FDF files, and
assert in DecompressMemFvs() that the runtime decompression will match it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19036 6f19259b-4bc3-4df7-8a09-765794883524
With gcc5 and enabling SECURE_BOOT and NETWORK_IP6, the build
failed with this error:
GenFv: ERROR 3000: Invalid
the required fv image size 0x814c18 exceeds the set fv image size 0x800000
Raise the DXEFV size to 9 MB to fix the build error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18577 6f19259b-4bc3-4df7-8a09-765794883524
In this patch, we replace the traditional IDE driver stack that comes from
PcAtChipsetPkg and IntelFrameworkModulePkg with more featureful drivers
from OvmfPkg and MdeModulePkg. The resultant driver stack is compatible
with the previous one, but provides more protocols, on more kinds of
virtual hardware.
Remove:
- PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
(removing EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
Remove the dependent:
- IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
(removing EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3])
As replacement, add:
- OvmfPkg/SataControllerDxe/SataControllerDxe.inf
(supplying EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
(providing EFI_ATA_PASS_THRU_PROTOCOL,
EFI_EXT_SCSI_PASS_THRU_PROTOCOL)
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
(supplying EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3],
providing EFI_BLOCK_IO2PROTOCOL,
EFI_STORAGE_SECURITY_COMMAND_PROTOCOL)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: rewrote commit message]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18532 6f19259b-4bc3-4df7-8a09-765794883524
Since SVN r18316 / git 5ca29abe52, the HTTP driver needs the HTTP
utilities driver to parse the headers of HTTP requests. Add the driver
into OVMF so that the HTTP driver can work properly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18359 6f19259b-4bc3-4df7-8a09-765794883524
This commit introdues a new build option to OvmfPkg: HTTP_BOOT_ENABLE.
When HttpBoot is enabled, a new Network boot option will show in the
boot manager menu with the device path like this:
PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)/Uri()
It works like the PXE one but fetches the NBP from the given http
url instead of the tftp service.
A simple testing environment can be set up with the QEMU tap network
and dnsmasq + lighttpd.
Here is the example of the dnsmasq config:
interface=<tap interface>
dhcp-range=192.168.111.100,192.168.111.120,12h
dhcp-option=60,"HTTPClient"
dhcp-boot="http://<tap ip>/<efi file>"
It's similar to the PXE server settings except the tftp function is
disabled, the option 60 must be "HTTPClient", and the boot uri is a
http url.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18258 6f19259b-4bc3-4df7-8a09-765794883524
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17914 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore hang when loads a PEIM whose section alignment requirement is 0x40
but the actual base address is 0x20 aligned.
The issue is caused by the following facts, in order:
1. GCC49 requires the section alignment of .data to be 0x40. So a new link
script gcc4.9-ld-script was added for GCC49 to specify the 0x40
alignment.
2. GenFw tool was enhanced to sync ELF's section alignment to PE header.
Before the enhancement, the section alignment of converted PE image
always equals to 0x20.
If only with #1 change, GCC49 build image won't hang in PeiCore because
the converted PE image still claims 0x20 section alignment which is
aligned to the align setting set in FDF file. But later with #2 change,
the converted PE image starts to claims 0x40 section alignment, while
build tool still puts the PEIM in 0x20 aligned address, resulting the
PeCoffLoaderLoadImage() reports IMAGE_ERROR_INVALID_SECTION_ALIGNMENT
error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17902 6f19259b-4bc3-4df7-8a09-765794883524
QEMU commit aa685789 ("xhci: generate a Transfer Event for each Transfer
TRB with the IOC bit set") fixed an emulation problem in QEMU; we can now
drive that host controller with edk2's XhciDxe. Include it in OvmfPkg, as
XHCI emulation is reportedly more virtualization-friendly than EHCI,
consuming less CPU.
The driver can be tested with the following QEMU command line options:
-device nec-usb-xhci -device usb-kbd
This patch should not regress existing QEMU command lines (ie. trigger an
ASSERT() in XhciDxe that fails on pre-aa685789 QEMU) because QEMU's
"-device nec-usb-xhci" has never before resulted in USB devices that
worked with edk2 firmware builds, hence users have never had a reason to
add that option.
Now that they learn about XHCI support in OVMF by reading this commit
message, they (or their packagers) will also know to update qemu to
aa685789 or later (in practice that means the upcoming 2.3 release), at
least if they want to use '-device nec-usb-xhci' with edk2, for the first
time ever.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17055 6f19259b-4bc3-4df7-8a09-765794883524
While Xen on Intel uses a virtual PCI device to communicate the
base address of the grant table, the ARM implementation uses a DT
node, which is fundamentally incompatible with the way XenBusDxe is
implemented, i.e., as a UEFI Driver Model implementation for a PCI
device.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16973 6f19259b-4bc3-4df7-8a09-765794883524
There are several network stack drivers in MdeModulePkg or NetworkPkg.
Currently, we only use the drivers from MdeModulePkg which only provides
the IPv4 support. This commit adds the IPv6 drivers in NetworkPkg into
OVMF.
Here is the table of drivers from Laszlo.
currently included related driver add or replace
from MdeModulePkg in NetworkPkg from NetworkPkg
------------------ -------------- ---------------
SnpDxe n/a n/a
DpcDxe n/a n/a
MnpDxe n/a n/a
VlanConfigDxe n/a n/a
ArpDxe n/a n/a
Dhcp4Dxe Dhcp6Dxe add
Ip4ConfigDxe Ip6Dxe add
Ip4Dxe Ip6Dxe add
Mtftp4Dxe Mtftp6Dxe add
Tcp4Dxe TcpDxe replace
Udp4Dxe Udp6Dxe add
UefiPxeBcDxe UefiPxeBcDxe replace
IScsiDxe IScsiDxe replace
Since the TcpDxe, UefiPxeBcDxe, and IScsiDxe drivers in NetworkPkg also
support IPv4, we replace the ones in MdeModulePkg.
To enable the IPv6 support, build OVMF with "-D NETWORK_IP6_ENABLE".
A special case is NetworkPkg/IScsiDxe. It requires openssl. For convenience,
NetworkPkg/IScsiDxe is enabled only if both IPv6 and SecureBoot are enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: typo fix in commit message; specil -> special]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16543 6f19259b-4bc3-4df7-8a09-765794883524
A ParaVirtualize block driver.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Add minimal support for controller name
- Remove stuff about BlockIo2
- Little cleanup
- Licenses and file headers
- Rename XenbusIo into XenBusIo
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16272 6f19259b-4bc3-4df7-8a09-765794883524
This includes Component Name and Driver Binding.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Simple support of controller name.
- Cleaning up comments, files header.
- Add Licenses
- Rename XenbusDxe to XenBusDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16258 6f19259b-4bc3-4df7-8a09-765794883524
OvmfPkg forked SecureBootConfigDxe from SecurityPkg in SVN r13635 (git
commit 8c71ec8f). Since then, the original (in
"SecurityPkg/VariableAuthenticated/SecureBootConfigDxe") has diverged
significantly.
The initial diff between the original and the fork, when the fork was made
(ie. at SVN r13635), reads as follows:
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr 2014-08-09 02:40:35.824851626 +0200
> @@ -51,7 +51,7 @@
> questionid = KEY_SECURE_BOOT_ENABLE,
> prompt = STRING_TOKEN(STR_SECURE_BOOT_PROMPT),
> help = STRING_TOKEN(STR_SECURE_BOOT_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
>
> @@ -158,7 +158,7 @@
> questionid = KEY_SECURE_BOOT_DELETE_PK,
> prompt = STRING_TOKEN(STR_DELETE_PK),
> help = STRING_TOKEN(STR_DELETE_PK_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
> endform;
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.577067027 +0200
> @@ -1,5 +1,8 @@
> ## @file
> -# Component name for SecureBoot configuration module.
> +# Component name for SecureBoot configuration module for OVMF.
> +#
> +# Need custom SecureBootConfigDxe for OVMF that does not force
> +# resets after PK changes since OVMF doesn't have persistent variables
> #
> # Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR>
> # This program and the accompanying materials
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.599067153 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.578067033 +0200
> @@ -2559,7 +2559,7 @@
> NULL
> );
> } else {
> - *ActionRequest = EFI_BROWSER_ACTION_REQUEST_RESET;
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT;
> }
> break;
The commit message is not overly verbose:
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset
We don't force a platform reset for OVMF when PK is changed in custom
mode setup.
But the INF file hunk is telling:
Need custom SecureBootConfigDxe for OVMF that does not force resets
after PK changes since OVMF doesn't have persistent variables
We do have persistent variables now. Let's disable the (now obsolete)
OvmfPkg fork, and revert to the (well maintained) SecurityPkg-provided
config driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gary Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16191 6f19259b-4bc3-4df7-8a09-765794883524
OVMF_VARS.fd and OVMF_CODE.fd split the variable store and the firmware
code in separate files.
The PCDs' values continue to depend only on FD_SIZE_1MB vs. FD_SIZE_2MB.
With the split files, it must be ensured on the QEMU command line that
OVMF_VARS.fd and OVMF_CODE.fd be contiguously mapped so that they end
exactly at 4GB. See QEMU commit 637a5acb (first released in v2.0.0).
In this patch we must take care to assign each PCD only once.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15670 6f19259b-4bc3-4df7-8a09-765794883524
This saves code duplication between the Ia32, Ia32X64, and X64 flavors,
and enables the next patch to include the varstore in new FD files by
reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15669 6f19259b-4bc3-4df7-8a09-765794883524
OVMF's SecMain is unique in the sense that it links against the following
two libraries *in combination*:
- IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/
LzmaCustomDecompressLib.inf
- MdePkg/Library/BaseExtractGuidedSectionLib/
BaseExtractGuidedSectionLib.inf
The ExtractGuidedSectionLib library class allows decompressor modules to
register themselves (keyed by GUID) with it, and it allows clients to
decompress file sections with a registered decompressor module that
matches the section's GUID.
BaseExtractGuidedSectionLib is a library instance (of type BASE) for this
library class. It has no constructor function.
LzmaCustomDecompressLib is a compatible decompressor module (of type
BASE). Its section type GUID is
gLzmaCustomDecompressGuid == EE4E5898-3914-4259-9D6E-DC7BD79403CF
When OVMF's SecMain module starts, the LzmaCustomDecompressLib constructor
function is executed, which registers its LZMA decompressor with the above
GUID, by calling into BaseExtractGuidedSectionLib:
LzmaDecompressLibConstructor() [GuidedSectionExtraction.c]
ExtractGuidedSectionRegisterHandlers() [BaseExtractGuidedSectionLib.c]
GetExtractGuidedSectionHandlerInfo()
PcdGet64 (PcdGuidedExtractHandlerTableAddress) -- NOTE THIS
Later, during a normal (non-S3) boot, SecMain utilizes this decompressor
to get information about, and to decompress, sections of the OVMF firmware
image:
SecCoreStartupWithStack() [OvmfPkg/Sec/SecMain.c]
SecStartupPhase2()
FindAndReportEntryPoints()
FindPeiCoreImageBase()
DecompressMemFvs()
ExtractGuidedSectionGetInfo() [BaseExtractGuidedSectionLib.c]
ExtractGuidedSectionDecode() [BaseExtractGuidedSectionLib.c]
Notably, only the extraction depends on full-config-boot; the registration
of LzmaCustomDecompressLib occurs unconditionally in the SecMain EFI
binary, triggered by the library constructor function.
This is where the bug happens. BaseExtractGuidedSectionLib maintains the
table of GUIDed decompressors (section handlers) at a fixed memory
location; selected by PcdGuidedExtractHandlerTableAddress (declared in
MdePkg.dec). The default value of this PCD is 0x1000000 (16 MB).
This causes SecMain to corrupt guest OS memory during S3, leading to
random crashes. Compare the following two memory dumps, the first taken
right before suspending, the second taken right after resuming a RHEL-7
guest:
crash> rd -8 -p 1000000 0x50
1000000: c0 00 08 00 02 00 00 00 00 00 00 00 00 00 00 00 ................
1000010: d0 33 0c 00 00 c9 ff ff c0 10 00 01 00 88 ff ff .3..............
1000020: 0a 6d 57 32 0f 00 00 00 38 00 00 01 00 88 ff ff .mW2....8.......
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
vs.
crash> rd -8 -p 1000000 0x50
1000000: 45 47 53 49 01 00 00 00 20 00 00 01 00 00 00 00 EGSI.... .......
1000010: 20 01 00 01 00 00 00 00 a0 01 00 01 00 00 00 00 ...............
1000020: 98 58 4e ee 14 39 59 42 9d 6e dc 7b d7 94 03 cf .XN..9YB.n.{....
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
The "EGSI" signature corresponds to EXTRACT_HANDLER_INFO_SIGNATURE
declared in
MdePkg/Library/BaseExtractGuidedSectionLib/BaseExtractGuidedSectionLib.c.
Additionally, the gLzmaCustomDecompressGuid (quoted above) is visible at
guest-phys offset 0x1000020.
Fix the problem as follows:
- Carve out 4KB from the 36KB gap that we currently have between
PcdOvmfLockBoxStorageBase + PcdOvmfLockBoxStorageSize == 8220 KB
and
PcdOvmfSecPeiTempRamBase == 8256 KB.
- Point PcdGuidedExtractHandlerTableAddress to 8220 KB (0x00807000).
- Cover the area with an EfiACPIMemoryNVS type memalloc HOB, if S3 is
supported and we're not currently resuming.
The 4KB size that we pick is an upper estimate for
BaseExtractGuidedSectionLib's internal storage size. The latter is
calculated as follows (see GetExtractGuidedSectionHandlerInfo()):
sizeof(EXTRACT_GUIDED_SECTION_HANDLER_INFO) + // 32
PcdMaximumGuidedExtractHandler * (
sizeof(GUID) + // 16
sizeof(EXTRACT_GUIDED_SECTION_DECODE_HANDLER) + // 8
sizeof(EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER) // 8
)
OVMF sets PcdMaximumGuidedExtractHandler to 16 decimal (which is the
MdePkg default too), yielding 32 + 16 * (16 + 8 + 8) == 544 bytes.
Regarding the lifecycle of the new area:
(a) when and how it is initialized after first boot of the VM
The library linked into SecMain finds that the area lacks the signature.
It initializes the signature, plus the rest of the structure. This is
independent of S3 support.
Consumption of the area is also limited to SEC (but consumption does
depend on full-config-boot).
(b) how it is protected from memory allocations during DXE
It is not, in the general case; and we don't need to. Nothing else links
against BaseExtractGuidedSectionLib; it's OK if DXE overwrites the area.
(c) how it is protected from the OS
When S3 is enabled, we cover it with AcpiNVS in InitializeRamRegions().
When S3 is not supported, the range is not protected.
(d) how it is accessed on the S3 resume path
Examined by the library linked into SecMain. Registrations update the
table in-place (based on GUID matches).
(e) how it is accessed on the warm reset path
If S3 is enabled, then the OS won't damage the table (due to (c)), hence
see (d).
If S3 is unsupported, then the OS may or may not overwrite the
signature. (It likely will.) This is identical to the pre-patch status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15433 6f19259b-4bc3-4df7-8a09-765794883524
This DXE driver will load/save persistent values for OVMF's config knobs,
plus expose those knobs via HII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15364 6f19259b-4bc3-4df7-8a09-765794883524
This driver (from
"MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf")
is first loaded normally during DXE. When the
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely
as a form of notification), the driver reloads itself to reserved memory.
During S3 Resume / PEI, the driver image is executed from there. In order
to access the boot script saved during S3 Suspend, LockBox access is
needed.
The boot script is transferred internal to PiDxeS3BootScriptLib:
Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked
against PiDxeS3BootScriptLib. Whichever is loaded first (during normal
boot, in the DXE phase), allocates the root storage for the script. The
address is then passed between the PiDxeS3BootScriptLib instances living
in the two separate drivers thru the dynamic
PcdS3BootScriptTablePrivateDataPtr PCD.
Dependencies:
BootScriptExecutorDxe
gEfiLockBoxProtocolGuid [OvmfPkg/AcpiS3SaveDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15307 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces
the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3
Boot Script, to be replayed in PEI during S3 Resume. The script contains
opcodes and opcode arguments to configure CPU, PCI and IO resources.
S3SaveStateDxe relies on the S3BootScriptLib library. The Null
implementation is not useful for actually saving the boot script, we need
the PiDxeS3BootScriptLib instance.
The PiDxeS3BootScriptLib library instance depends on LockBoxLib,
implemented for OVMF in one of the previous patches.
PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null
instance of the latter. It means that SMBus commands in the boot script
will have no effect when interpreted during S3 Resume. This should be fine
for OvmfPkg and QEMU.
EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver
(purely as a form of notification), the S3SaveStateDxe driver saves the
boot script to EfiACPIMemoryNVS, and links it into the LockBox.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524
"OvmfPkg/AcpiS3SaveDxe/AcpiS3SaveDxe.inf" (originally:
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf")
produces the EFI_ACPI_S3_SAVE_PROTOCOL.
When found, this protocol is automatically invoked by
BdsLibBootViaBootOption(), in file
"IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c", right before
booting a boot option, to save ACPI S3 context.
At that point during BDS, our AcpiPlatformDxe driver will have installed
the FACS table (which AcpiS3SaveDxe has a use-time dependency upon).
With regard to dependencies: AcpiS3SaveDxe implements
EFI_ACPI_S3_SAVE_PROTOCOL by relying on LockBoxLib.
BdsLibBootViaBootOption()
EFI_ACPI_S3_SAVE_PROTOCOL [AcpiS3SaveDxe]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Remove EmuNvramLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15303 6f19259b-4bc3-4df7-8a09-765794883524
The S3 suspend/resume infrastructure depends on the LockBox library class.
The edk2 tree currently contains Null and SMM instances. The Null instance
is useless, and the SMM instance would require SMM emulation by including
the SMM core and adding several new drivers, which is deemed too complex.
Hence add a simple LockBoxLib instance for OVMF.
jordan.l.justen@intel.com:
* use PCDs instead of EmuNvramLib
- clear memory in PlatformPei on non S3 boots
* allocate NVS memory and store a pointer to that memory
- reduces memory use at fixed locations
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15301 6f19259b-4bc3-4df7-8a09-765794883524
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the
EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface.
When the platform-specific initialization code (in PEI) sets the Boot Mode
to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips
the DXE phase entirely, and executes the S3 Resume PEIM through the
EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".)
S3Resume2Pei depends on LockBoxLib.
EFI_PEI_S3_RESUME2 [S3Resume2Pei]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15300 6f19259b-4bc3-4df7-8a09-765794883524
This 32k section of RAM will be declared to the PEI Core on
S3 resume to allow memory allocations during S3 resume PEI.
If the boot mode is BOOT_ON_S3_RESUME, then we publish
the pre-reserved PcdS3AcpiReservedMemory range to PEI.
If the boot mode is not BOOT_ON_S3_RESUME, then we reserve
this range as ACPI NVS so the OS will not use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15294 6f19259b-4bc3-4df7-8a09-765794883524
By splitting the PEI and DXE phases into separate FVs,
we can only reserve the PEI FV for ACPI S3 support.
This should save about 7MB.
Unfortunately, this all has to happen in a single commit.
DEC:
* Remove PcdOvmfMemFv(Base|Size)
* Add PcdOvmfPeiMemFv(Base|Size)
* Add PcdOvmfDxeMemFv(Base|Size)
FDF:
* Add new PEIFV. Move PEI modules here.
* Remove MAINFV
* Add PEIFV and DXEFV into FVMAIN_COMPACT
- They are added as 2 sections of a file, and compressed
together so they should retain good compression
* PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set
SEC:
* Find both the PEI and DXE FVs after decompression.
- Copy them separately to their memory locations.
Platform PEI driver:
* Fv.c: Publish both FVs as appropriate
* MemDetect.c: PcdOvmfMemFv(Base|Size) =>
PcdOvmfDxeMemFv(Base|Size)
OVMF.fd before:
Non-volatile data storage
FVMAIN_COMPACT uncompressed
FV FFS file LZMA compressed
MAINFV uncompressed
individual PEI modules uncompressed
FV FFS file compressed with PI_NONE
DXEFV uncompressed
individual DXE modules uncompressed
SECFV uncompressed
OVMF.fd after:
Non-volatile data storage
FVMAIN_COMPACT uncompressed
FV FFS file LZMA compressed
PEIFV uncompressed
individual PEI modules uncompressed
DXEFV uncompressed
individual DXE modules uncompressed
SECFV uncompressed
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
Note: The Temporary RAM memory size is being reduced from
64KB to 32KB. This still appears to be more than
adequate for OVMF's early PEI phase. We will be adding
another 32KB range of RAM just above this range for
use on S3 resume.
The range is declared as part of MEMFD, so it is easier
to identify the memory range.
We also now assign PCDs to the memory range.
The PCDs are used to set the initial SEC/PEI stack in
SEC's assembly code.
The PCDs are also used in the SEC C code to setup
the Temporary RAM PPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15147 6f19259b-4bc3-4df7-8a09-765794883524
To help consolidate OVMF fixed memory uses, we declare this
range in MEMFD and thereby move it to 8MB.
We also now declare the table range in the FDF to set
PCDs. This allows us to ASSERT that CR3 is set as expected
in OVMF SEC.
OvmfPkgIa32.fdf and OvmfPkgIa32X64.fdf are updated simply
for consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15146 6f19259b-4bc3-4df7-8a09-765794883524
This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
MMIO operation
- VirtioNetInitialize(): fix destination error label for when
SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
operation
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
This driver will support a flash FVB implementation if QEMU flash
is detected.
The driver is added to the apriori list to make sure it runs
before the EmuVariableFvbRuntimeDxe driver. If this driver detects
flash support, then it will disable the EmuVariableFvbRuntimeDxe
driver by setting PcdFlashNvStorageVariableBase64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14840 6f19259b-4bc3-4df7-8a09-765794883524
This is to prepare for QEMU flash support which will allow
non-volatile variables to be saved in the flash image.
Note two size changes:
* NV Varstore size increased from 0xc000 to 0xe000
* FTW work size decreased from 0x2000 to 0x1000
The reason for this change is that the fault-tolerant write
support requires that the work area fit within the block
just before the fault-tolerant write spare storage blocks.
Since QEMU flash blocks have a size of 0x1000, this means
that the maximum FTW work size is 0x1000.
v2:
* Update commit message and PcdVariableStoreSize
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
The 1MB image with full debug and the shell included is too
large to implement flash based non-volatile variable.
After this change, building with -D FD_SIZE_1MB will
force the smaller flash size.
The default size for RELEASE build remains at 1MB, so using
-b RELEASE on the build command line will result in a
1MB flash size. For RELEASE builds -D FD_SIZE_2MB can be
used to produce a 2MB flash image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14833 6f19259b-4bc3-4df7-8a09-765794883524
Previously OVMF included the older EFI shell binary when building.
Now we will build and use the UEFI shell (ShellPkg) instead.
v2:
* Don't bother building UEFI shell when USE_OLD_SHELL is defined
* Fix errors in OvmfPkgIa32X64.fdf
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14600 6f19259b-4bc3-4df7-8a09-765794883524
Also summarize the resultant NIC driver options in the README file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14421 6f19259b-4bc3-4df7-8a09-765794883524
DHCP, PXE, and StdLib socket apps are enabled in OVMF by the sum of:
(a) a UEFI NIC driver,
(b) the generic network stack.
The only choice for (a) used to be the proprietary Intel E1000 driver,
which is cumbersome to obtain and enable.
The iPXE UEFI NIC drivers packaged with qemu-1.5 cover (a) for each NIC
type supported by qemu, and are easy to obtain & configure, even for
earlier qemu versions. Therefore enable (b) per default as well.
This doesn't take up much space; the binaries (b) adds to the firmware
don't seem to need -D FD_SIZE_2MB.
Intel's e1000 driver remains an option, requested by the -D E1000_ENABLE
build flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14366 6f19259b-4bc3-4df7-8a09-765794883524
With reference to
<http://sourceforge.net/mailarchive/message.php?msg_id=30359322>:
"MEMFD is built so MAINFV's contents will be relocated during the build to
address 0x800000", and it "is a firmware volume with most OVMF code/data
uncompressed. [...] Increasing its size has a little impact on the size of
the resulting firmware image since the blank part of the firmware volume
will compress well."
Let's increase the size to 8MB, since the current limit can get in the way
(for example when building-in the Intel3.5 drivers for e1000 with
-D FD_SIZE_2MB -D NETWORK_ENABLE -D SECURE_BOOT_ENABLE).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14133 6f19259b-4bc3-4df7-8a09-765794883524
Fu Siyuan
Hao Wu
Michael D Kinney
Stefan Berger
Liming Gao
shenglei
Gerd Hoffmann
Laszlo Ersek
Marc-André Lureau
Ruiyu Ni
Paulo Alcantara
Brijesh Singh
Gary Lin
Bhupesh Sharma
Cinnamon Shia
Bruce Cran
Jordan Justen
Star Zeng
Alcantara, Paulo
Ard Biesheuvel
Reza Jelveh
Jiaxin Wu
Anthony PERARD
Olivier Martin
Eric Dong
jljusten