Type 0: Update "EDD Enhanced Disk Driver)..." to
"EDD (Enhanced Disk Driver)..." for
STR_SMBIOSVIEW_PRINTINFO_EDD_ENHANCED_DRIVER
Type 3: Use L" Laptop" instead of L" LapTop" in
SystemEnclosureTypeTable to match SMBIOS spec.
Type 10: The BIT7 of Device Type is representing the
status of device whether it is enabled or disabled.
But current code is not considering the BIT7 and will
print "Undefined Value" for enabled device. Type 41
has same definition of Device Type, the code is
correct and will be applied to Type 10 by this patch.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current PrintBitsInfo() will always print an additional trailing
" | " for the bit flags, for example,
Base Board Feature Flags: Hosting board | Replaceable |
Th patch is to eliminate trailing " | " in PrintBitsInfo(), then
the output will be like below
Base Board Feature Flags: Hosting board | Replaceable
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The implementation was already there but through a private flag
"-_e". The patch removes "-_e" support and add "-ec" support.
Removing old "-_e" support makes the pci command more clean.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=354
The patch removes the local PCI definitions and uses the definitions
defined in MdePkg/Include/IndustryStandard folder.
There is no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
The decoding of TPM Device (Type 43) has been added at
e9f0be021b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345
When I am adding SMBIOS spec 3.1.0 support, I found the decoding
of SMBIOS spec 3.0.0 for some definitions is missing.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344
SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding
of it is missing. I found it when I am adding SMBIOS spec 3.1.0
support.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Added decoding of the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The smbiosview command was not displaying SMBIOS Type 3 Height, NumberofPowerCords, or SKU Number.
Added handling to display these values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds the "-sfo" support to "dmpstore" command.
When -l or -d is specified, -sfo is not supported.
When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""
"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist
The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
The more proper place for macro SHELL_FREE_NON_NULL is ShellLib.h
instead of ShellBase.h.
Modify Compress.c to resolve build failure due to this change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1416, latest UEFI Shell 2.2 Specification has added Persistent
Memory support in 'memmap' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to PCI spec the next AER capability is relative to
the beginning of PCI configuration space. Hence substract the
base offset to get the next capability.
"-_e" option is changed from TypeFlag to TypeValue, so that
user can specify individual AER capability to print.
e.g. pci 00 00 01 -i -_e <capability-id>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
It is to make the info shown more aligned with SMBIOS spec.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Old implementation depends on UefiHandleParsingLib and uses
incorrect Index to get handle type.
The simplest ConnectAll() implementation can be just to
locate all handles and call BS.ConnectController() for each
of them recursively. BS.ConnectController() does nothing
to the image handle. Such implementation is borrowed from
BDS core implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This reverts commit ee60bd2b6a and
e36ed7a84b.
The two commits enhanced 'edit' to support text selection through
mouse. But the code introduced some bugs resulting the text
selection behavior is not very usable and potentially hang in
certain platforms.
So I'd like to revert them firstly. If there is strong
requirement for the text selection through mouse in 'edit'
I will refine and re-add the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
Remove variable FStartRow that is declared, assigned but never referenced.
This fixes a warning emitted by GCC when -Wunused-but-set-variable is in
effect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Make the USB mouse cursor move smoothly in 'edit'.
2. Make the USB mouse can drag and select text in 'edit'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix SMBIOSVIEW decode of the HeaderLog fields of the PCIe
AER structure . The PCIe 2.1 Base Specification, section 7.10, lists
this as 16 bytes, or 4 DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
USB mouse cursor cannot move unless the left button is down. The patch
refresh the FileBuffer of Editor every time when the 'MainEditorRefresh'
is called to fix this bug.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
The UEFI Shell specification classifies shell commands into various shell
levels / profiles.
Currently the DumpHex() internal function is only used by commands that
belong to the Debug1 profile exclusively (i.e., they are not required to
be present in other than Debug1 profiles):
- SMBIOSVIEW
- PCI
- DMPSTORE
- DMEM
- DBLK
In the next patch, we'd like to call DumpHex() from BCFG as well. However,
BCFG is not only required to be present in the Debug1 profile; the
Install1 profile contains BCFG as well. For this reason, move DumpHex()
from UefiShellDebug1CommandsLib to the more generic UefiShellCommandLib,
which "Provides interface to shell internal functions for shell commands".
The matching header file is "ShellPkg/Include/Library/ShellCommandLib.h".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19717 6f19259b-4bc3-4df7-8a09-765794883524
Fix build warnings for potentially uninitialized local variables
in the functions ShellMmLocateIoProtocol() and ShellCommandRunMm()
in the Shell implementation of the 'mm' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19233 6f19259b-4bc3-4df7-8a09-765794883524
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
Added SMBIOS 3.0 support in dmdem Shell command since SMBIOS 3.0 uses a different GUID in the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18506 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
Serial console driver may not support all databits / stopbits attribute values.
But ‘sermode’ command only displays a general error indicating operation failure.
Instead it should decode error status and report more accurate error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17978 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <<tapandshah@hp.com>>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17894 6f19259b-4bc3-4df7-8a09-765794883524
The ShellCommandRunSetVar() function calls the ShellIsHexOrDecimalNumber()
UefiShellLib function to determine if the data string in the SETVAR
command is a string of hexadecimal bytes.
However, ShellIsHexOrDecimalNumber() calls ShellConvertStringToUint64()
for validation. Therefore SETVAR rejects hex strings that cannot be
interpreted as UINT64 values due to range errors, despite the fact that
the hexadecimal data string of the SETVAR command is supposed to describe
an arbitrary array of bytes, rather than UINT64 values.
The internal library function InternalShellIsHexOrDecimalNumber() comes
close, as the first idea for the fix, however it is not quite right
either; it removes a leading minus sign, plus it allows 0x / 0X prefixes.
This would not be correct for the SETVAR command.
Instead, add a trivial utility function that is specific to the SETVAR
implementation. IsStringOfHexNibbles() accepts empty strings for
simplicity, but where we call it we have already ensured that the data
string is not empty (because that is handled earlier by the "delete
variable" branch of SETVAR). An even number of nibbles is also enforced
near the call site.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17128 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (such as ARM toolchain) complain if there is
no new line at the end of a source file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17105 6f19259b-4bc3-4df7-8a09-765794883524
smbiosview can dump 64-bit entry point and table
as long as SMBIOS 3.0 table exists in system configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17060 6f19259b-4bc3-4df7-8a09-765794883524
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
Fixed smbiosview to use correct value to parse Type 27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17007 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16004 6f19259b-4bc3-4df7-8a09-765794883524
For Invalid character ‘-’ in Pci.c line 806 and line 811, using ASCII
encoding byte 0x2d to replace.
Example error from GCC 4.9:
ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c:806:5: error: converting to execution character set: Invalid or incomplete multibyte or wide character
L"Ethernet (802.11a � 5 GHz)",
^
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15889 6f19259b-4bc3-4df7-8a09-765794883524
This updated the strings to be compliant with PCI CODE AND ID ASSIGNMENT SPECIFICATION 1.5.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15885 6f19259b-4bc3-4df7-8a09-765794883524
As the shell inverts foreground and background it needs to be sure that it properly masks off the reserved bits and this is important since the foreground and background are not the same numbers of bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15681 6f19259b-4bc3-4df7-8a09-765794883524
The comp command was potentially displaying the incorrect offset into the file due to comparing 3 extra bytes for difference groups.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15558 6f19259b-4bc3-4df7-8a09-765794883524
It's invalid to set a variable that's available from runtime services but not
from boot services.
Currently if you pass '-rt' without '-bs' you get a generic
'Invalid Parameter' message. We should either print a more useful message in
this case, or make '-rt' imply '-bs' (as this patch does). The Shell Spec is
ambiguous on the matter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <Brendan.Jackman@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15323 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Chen A Chen
Star Zeng
Linson Augustine
Chris Phillips
Dandan Bi
Michael Kinney
Tapan Shah
Abdul Lateef Attar
Liming Gao
Samer El-Haj-Mahmoud
Ard Biesheuvel
Qiu Shumin
Laszlo Ersek
Samer El-Haj-Mahmoud
Jordan Justen
Tapan Shah
Olivier Martin
Elvin Li
jcarsey
Jaben Carsey
Samer El-Haj-Mahmoud elhaj
Chris Phillips
Eric Dong
Jeff Bobzin (jeff.bobzin
Brendan Jackman