Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16004 6f19259b-4bc3-4df7-8a09-765794883524
For Invalid character ‘-’ in Pci.c line 806 and line 811, using ASCII
encoding byte 0x2d to replace.
Example error from GCC 4.9:
ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c:806:5: error: converting to execution character set: Invalid or incomplete multibyte or wide character
L"Ethernet (802.11a � 5 GHz)",
^
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15889 6f19259b-4bc3-4df7-8a09-765794883524
This updated the strings to be compliant with PCI CODE AND ID ASSIGNMENT SPECIFICATION 1.5.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15885 6f19259b-4bc3-4df7-8a09-765794883524
As the shell inverts foreground and background it needs to be sure that it properly masks off the reserved bits and this is important since the foreground and background are not the same numbers of bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15681 6f19259b-4bc3-4df7-8a09-765794883524
The comp command was potentially displaying the incorrect offset into the file due to comparing 3 extra bytes for difference groups.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15558 6f19259b-4bc3-4df7-8a09-765794883524
It's invalid to set a variable that's available from runtime services but not
from boot services.
Currently if you pass '-rt' without '-bs' you get a generic
'Invalid Parameter' message. We should either print a more useful message in
this case, or make '-rt' imply '-bs' (as this patch does). The Shell Spec is
ambiguous on the matter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <Brendan.Jackman@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15323 6f19259b-4bc3-4df7-8a09-765794883524
The file format is as below:
<File> := <Variable>+
<Variable> := <Name-Size> <Data-Size> <Name> <GUID> <Attributes> <Data> <Crc32>
Each variable representation in the file has a CRC32 value which can provide a mechanism to detect the file modification.
When any CRC32 is incorrect, dmpstore rejects to load the variables from the file.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15083 6f19259b-4bc3-4df7-8a09-765794883524
there is a new non-spec parameter "-_e" which allows additional information output to be controlled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15070 6f19259b-4bc3-4df7-8a09-765794883524
This change allows DmpStore command to delete all variables whereas before it would stop after a single deletion due to looping errors. It uses a recursive function and deletes the last item returned from GetNextVariableName() first and then goes "backwards" to the first items.
This can't delete authenticated variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15014 6f19259b-4bc3-4df7-8a09-765794883524
- Automatically use non-interactive mode during script execution.
- Automatically use non-interactive mode when a specific value is read (omitting this behavior was a violation of the UEFI Shell Spec)
- Only output the value read in when reading a value in a script; this allows automated use of the MM command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Chris Phillips <chrisp@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14874 6f19259b-4bc3-4df7-8a09-765794883524
If AllocateZeroPool() returns NULL,
GetVariable() will return EFI_BUFFER_TOO_SMALL,
FreePool() will receive NULL.
So check for NULL before FreePool().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14688 6f19259b-4bc3-4df7-8a09-765794883524
Tapan Shah
Qiu Shumin
jcarsey
Jaben Carsey
Samer El-Haj-Mahmoud elhaj
Chris Phillips
Eric Dong
Jeff Bobzin (jeff.bobzin
Brendan Jackman
Tian, Hot
Olivier Martin
Ruiyu Ni
Jordan Justen
Sergei Antonov