mirror of https://github.com/acidanthera/audk.git
5e7731443c
The GICD_IGROUPR0 is banked for each connected processor. It means the Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be configured for every processor. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524 |
||
|---|---|---|
| .. | ||
| Bds | ||
| Debugger_scripts | ||
| Include | ||
| Library | ||
| Sec | ||
| Tools | ||
| BeagleBoardPkg.dec | ||
| BeagleBoardPkg.dsc | ||
| BeagleBoardPkg.fdf | ||
| ConfigurationHeader.dat | ||
| b.bat | ||
| ba.bat | ||
| build.sh | ||
| readme.txt | ||
readme.txt
On Ubuntu 10.04, in your $(WORKROOT) directory (eg: ~/dev/) Build UEFI for the BeagleBoard : ================================ # Requirements sudo apt-get install uuid-dev # Get the arm-none-eabi Toolchain: cd $(WORKROOT) wget http://www.codesourcery.com/sgpp/lite/arm/portal/package7813/public/arm-none-eabi/arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2 tar xjf arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2 Add the arm-none-eabi toolchain to your path # Build UEFI svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest cd $(WORKROOT)/edk2 svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch cd BeagleBoardPkg/ ./build.sh # To Build a Release verion of UEFI ./build.sh RELEASE Test UEFI on qEmu : =================== Installing Linaro qEmu: ----------------------- cd $(WORKROOT) git clone git://git.linaro.org/qemu/qemu-linaro.git cd $(WORKROOT)/qemu-linaro ./configure --target-list=arm-softmmu,arm-linux-user,armeb-linux-user make Installing Linaro image Creator: -------------------------------- wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-tools-0.4.8.tar.gz tar xzf linaro-image-tools-0.4.8.tar.gz cd $(WORKROOT)/linaro-image-tools-0.4.8/ sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found Creating u-boot + Linux Linaro image: ------------------------------------- mkdir $(WORKROOT)/beagle_image && cd $(WORKROOT)/beagle_image wget http://releases.linaro.org/platform/linaro-m/hwpacks/final/hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz wget http://releases.linaro.org/platform/linaro-m/headless/release-candidate/linaro-m-headless-tar-20101101-0.tar.gz sudo $(WORKROOT)/linaro-image-tools-0.4.8/linaro-media-create --image_file beagle_sd.img --dev beagle --binary linaro-m-headless-tar-20101101-0.tar.gz --hwpack hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz sudo chmod a+rw beagle_sd.img Test u-boot + Linux Linaro image on qEmu: ----------------------------------------- $(WORKROOT)/qemu-linaro/arm-softmmu/qemu-system-arm -M beagle -sd $(WORKROOT)/beagle_image/beagle_sd.img -serial stdio -clock unix # in u-boot: boot Start UEFI from NOR Flash : --------------------------- # Adding zImage to beagle_sd.img mkdir /tmp/beagle_img1 sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1 cp zImage /tmp/beagle_img1 sudo umount /tmp/beagle_img1 ./qemu-system-arm -M beagle -mtdblock /work/tianocore/Build/BeagleBoard/DEBUG_ARMGCC/FV/BeagleBoard_EFI_flashboot.fd -serial stdio -sd /work/linaro-image-tools-0.4.8/beagle_sd.img Start UEFI from SD card : ------------------------- # To replace u-boot by uefi in the SD card 1) Build the BeagleBoard UEFI firmware without the OMAP353x header cd $(WORKROOT)/edk2/BeagleBoardPkg/ ./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1 2) Replace u-boot by UEFI sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1 sudo cp ../Build/BeagleBoard/DEBUG_ARMGCC/FV/BEAGLEBOARD_EFI.fd /tmp/beagle_img1/u-boot.bin sudo umount /tmp/beagle_img1