signature work - returns ability to add/remove/specify algorithms by
wildcard.
Algorithm lists are now fully expanded when the server/client configs
are finalised, so errors are reported early and the config dumps
(e.g. "ssh -G ...") now list the actual algorithms selected.
Clarify that, while wildcards are accepted in algorithm lists, they
aren't full pattern-lists that support negation.
(lots of) feedback, ok markus@
OpenBSD-Commit-ID: a8894c5c81f399a002f02ff4fe6b4fa46b1f3207
In ssh, when an agent fails to return a RSA-SHA2 signature when
requested and falls back to RSA-SHA1 instead, retry the signature to
ensure that the public key algorithm sent in the SSH_MSG_USERAUTH
matches the one in the signature itself.
In sshd, strictly enforce that the public key algorithm sent in the
SSH_MSG_USERAUTH message matches what appears in the signature.
Make the sshd_config PubkeyAcceptedKeyTypes and
HostbasedAcceptedKeyTypes options control accepted signature algorithms
(previously they selected supported key types). This allows these
options to ban RSA-SHA1 in favour of RSA-SHA2.
Add new signature algorithms "rsa-sha2-256-cert-v01@openssh.com" and
"rsa-sha2-512-cert-v01@openssh.com" to force use of RSA-SHA2 signatures
with certificate keys.
feedback and ok markus@
OpenBSD-Commit-ID: c6e9f6d45eed8962ad502d315d7eaef32c419dde
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
username is available currently. In the client this is via %i, in the server
%U (since %i was already used in the client in some places for this, but used
for something different in the server); bz#2870, ok dtucker@
OpenBSD-Commit-ID: c7e912b0213713316cb55db194b3a6415b3d4b95
interactive and CS1 for bulk
AF21 was selected as this is the highest priority within the low-latency
service class (and it is higher than what we have today). SSH is elastic
and time-sensitive data, where a user is waiting for a response via the
network in order to continue with a task at hand. As such, these flows
should be considered foreground traffic, with delays or drops to such
traffic directly impacting user-productivity.
For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable
networks implementing a scavanger/lower-than-best effort class to
discriminate scp(1) below normal activities, such as web surfing. In
general this type of bulk SSH traffic is a background activity.
An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH
is that they are recognisable values on all common platforms (IANA
https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and
for AF21 specifically a definition of the intended behavior exists
https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition
of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and
for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662
The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE
802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate",
or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e,
MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK").
OK deraadt@, "no objection" djm@
OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group18-sha512
From Jakub Jelen via bz#2826
OpenBSD-Commit-ID: 51bf769f06e55447f4bfa7306949e62d2401907a
Mention ServerAliveTimeout in context of TCPKeepAlives;
prompted by Christoph Anton Mitterer via github
OpenBSD-Commit-ID: f0cf1b5bd3f1fbf41d71c88d75d93afc1c880ca2
Shorter, more accurate explanation of
NoHostAuthenticationForLocalhost without the confusing example. Prompted by
Christoph Anton Mitterer via github and bz#2293.
OpenBSD-Commit-ID: 19dc96bea25b80d78d416b581fb8506f1e7b76df
Replace "trojan horse" with the correct term (MITM).
From maikel at predikkta.com via bz#2822, ok markus@
OpenBSD-Commit-ID: e86ac64c512057c89edfadb43302ac0aa81a6c53
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
In the description of pattern-lists, clarify negated
matches by explicitly stating that a negated match will never yield a
positive result, and that at least one positive term in the pattern-list must
match. bz#1918
Upstream-ID: 652d2f9d993f158fc5f83cef4a95cd9d95ae6a14
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
Expand ssh_config's StrictModes option with two new
settings:
StrictModes=accept-new will automatically accept hitherto-unseen keys
but will refuse connections for changed or invalid hostkeys.
StrictModes=off is the same as StrictModes=no
Motivation:
StrictModes=no combines two behaviours for host key processing:
automatically learning new hostkeys and continuing to connect to hosts
with invalid/changed hostkeys. The latter behaviour is quite dangerous
since it removes most of the protections the SSH protocol is supposed to
provide.
Quite a few users want to automatically learn hostkeys however, so
this makes that feature available with less danger.
At some point in the future, StrictModes=no will change to be a synonym
for accept-new, with its current behaviour remaining available via
StrictModes=off.
bz#2400, suggested by Michael Samuel; ok markus
Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
Allow IPQoS=none in ssh/sshd to not set an explicit
ToS/DSCP value and just use the operating system default; ok dtucker@
Upstream-ID: 77906ff8c7b660b02ba7cb1e47b17d66f54f1f7e
man pages with pseudo synopses which list filenames end
up creating very ugly output in man -k; after some discussion with ingo, we
feel the simplest fix is to remove such SYNOPSIS sections: the info is hardly
helpful at page top, is contained already in FILES, and there are
sufficiently few that just zapping them is simple;
ok schwarze, who also helpfully ran things through a build to check
output;
Upstream-ID: 3e211b99457e2f4c925c5927d608e6f97431336c
use HostKeyAlias if specified instead of hostname for
matching host certificate principal names; bz#2728; ok dtucker@
Upstream-ID: dc2e11c83ae9201bbe74872a0c895ae9725536dd
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
As promised in last release announcement: remove
support for Blowfish, RC4 and CAST ciphers. ok markus@ deraadt@
Upstream-ID: 21f8facdba3fd8da248df6417000867cec6ba222
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
support =- for removing methods from algorithms lists,
e.g. Ciphers=-*cbc; suggested by Cristian Ionescu-Idbohrn in bz#2671 "I like
it" markus@
Upstream-ID: c78c38f9f81a963b33d0eade559f6048add24a6d
remove 3des-cbc from the client's default proposal;
64-bit block ciphers are not safe in 2016 and we don't want to wait until
attacks like sweet32 are extended to SSH.
As 3des-cbc was the only mandatory cipher in the SSH RFCs, this may
cause problems connecting to older devices using the defaults, but
it's highly likely that such devices already need explicit
configuration for KEX and hostkeys anyway.
ok deraadt, markus, dtucker
Upstream-ID: a505dfe65c6733af0f751b64cbc4bb7e0761bc2f
reverse the order in which -J/JumpHost proxies are visited to
be more intuitive and document
reported by and manpage bits naddy@
Upstream-ID: 3a68fd6a841fd6cf8cedf6552a9607ba99df179a
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
rsa-sha2-512,rsa-sha2-256 cannot be selected explicitly
in *KeyTypes options yet. Remove them from the lists of algorithms for now.
committing on behalf of markus@ ok djm@
Upstream-ID: c6e8820eb8e610ac21551832c0c89684a9a51bb7
since these pages now clearly tell folks to avoid v1,
normalise the docs from a v2 perspective (i.e. stop pointing out which bits
are v2 only);
ok/tweaks djm ok markus
Upstream-ID: eb474f8c36fb6a532dc05c282f7965e38dcfa129
Replace list of ciphers and MACs adjacent to -1/-2 flag
descriptions in ssh(1) with a strong recommendation not to use protocol 1.
Add a similar warning to the Protocol option descriptions in ssh_config(5)
and sshd_config(5);
prompted by and ok mmcc@
Upstream-ID: 961f99e5437d50e636feca023978950a232ead5e
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
turn off 1024 bit diffie-hellman-group1-sha1 key
exchange method (already off in server, this turns it off in the client by
default too) ok dtucker@
Upstream-ID: f59b88f449210ab7acf7d9d88f20f1daee97a4fa
Reorder client proposal to prefer
diffie-hellman-group-exchange-sha1 over diffie-hellman-group14-sha1. ok djm@
Upstream-ID: 552c08d47347c3ee1a9a57d88441ab50abe17058
Document that the TERM environment variable is not
subject to SendEnv and AcceptEnv. bz#2386, based loosely on a patch from
jjelen at redhat, help and ok jmc@
UpdateHostKeys fixes:
I accidentally changed the format of the hostkeys@openssh.com messages
last week without changing the extension name, and this has been causing
connection failures for people who are running -current. First reported
by sthen@
s/hostkeys@openssh.com/hostkeys-00@openssh.com/
Change the name of the proof message too, and reorder it a little.
Also, UpdateHostKeys=ask is incompatible with ControlPersist (no TTY
available to read the response) so disable UpdateHostKeys if it is in
ask mode and ControlPersist is active (and document this)
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
Host key rotation support.
Add a hostkeys@openssh.com protocol extension (global request) for
a server to inform a client of all its available host key after
authentication has completed. The client may record the keys in
known_hosts, allowing it to upgrade to better host key algorithms
and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default on).
ok markus@
mention ssh -Q feature to list supported { MAC, cipher,
KEX, key } algorithms in more places and include the query string used to
list the relevant information; bz#2288
Tweak config reparsing with host canonicalisation
Make the second pass through the config files always run when
hostname canonicalisation is enabled.
Add a "Match canonical" criteria that allows ssh_config Match
blocks to trigger only in the second config pass.
Add a -G option to ssh that causes it to parse its configuration
and dump the result to stdout, similar to "sshd -T"
Allow ssh_config Port options set in the second config parse
phase to be applied (they were being ignored).
bz#2267 bz#2286; ok markus
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[ssh.c ssh_config.5]
Add a %C escape sequence for LocalCommand and ControlPath that expands
to a unique identifer based on a has of the tuple of (local host,
remote user, hostname, port).
Helps avoid exceeding sockaddr_un's miserly pathname limits for mux
control paths.
bz#2220, based on patch from mancha1 AT zoho.com; ok markus@
[readconf.c readconf.h ssh.c ssh_config.5]
reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes
the hostname. This allows users to write configurations that always
refer to canonical hostnames, e.g.
CanonicalizeHostname yes
CanonicalDomains int.example.org example.org
CanonicalizeFallbackLocal no
Host *.int.example.org
Compression off
Host *.example.org
User djm
ok markus@
[Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
[chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
[dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
[ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
cipher "chacha20-poly1305@openssh.com" that combines Daniel
Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode.
Inspired by and similar to Adam Langley's proposal for TLS:
http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
but differs in layout used for the MAC calculation and the use of a
second ChaCha20 instance to separately encrypt packet lengths.
Details are in the PROTOCOL.chacha20poly1305 file.
Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
ok markus@ naddy@
[readconf.c servconf.c ssh_config.5 sshd_config.5]
Disallow empty Match statements and add "Match all" which matches
everything. ok djm, man page help jmc@
[readconf.c ssh_config.5]
rename "command" subclause of the recently-added "Match" keyword to
"exec"; it's shorter, clearer in intent and we might want to add the
ability to match against the command being executed at the remote end in
the future.
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
[readconf.c readconf.h ssh_config.5 sshconnect.c]
Add a ssh_config ProxyUseFDPass option that supports the use of
ProxyCommands that establish a connection and then pass a connected
file descriptor back to ssh(1). This allows the ProxyCommand to exit
rather than have to shuffle data back and forth and enables ssh to use
getpeername, etc. to obtain address information just like it does with
regular directly-connected sockets. ok markus@
[ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
do not use Sx for sections outwith the man page - ingo informs me that
stuff like html will render with broken links;
issue reported by Eric S. Raymond, via djm
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
[ssh_config.5 sshconnect2.c]
Make IdentitiesOnly apply to keys obtained from a PKCS11Provider.
This allows control of which keys are offered from tokens using
IdentityFile. ok markus@
[mac.c myproposal.h ssh_config.5 sshd_config.5]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
[ssh_config.5 sshd_config.5]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
[readconf.c ssh_config.5]
support negated Host matching, e.g.
Host *.example.org !c.example.org
User mekmitasdigoat
Will match "a.example.org", "b.example.org", but not "c.example.org"
ok markus@
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
[ssh_config.5]
Reformat default value of PreferredAuthentications entry (current
formatting implies ", " is acceptable as a separator, which it's not.
ok djm@
djm@openbsd.org
jmc@openbsd.org
job@openbsd.org
dtucker@openbsd.org
millert@openbsd.org
markus@openbsd.org
bluhm@openbsd.org
naddy@openbsd.org
sobrado@openbsd.org
jcs@openbsd.org
Damien Miller
Darren Tucker