Currently, the NULL version Tdx functions are only built for Ia32.
In BaseLib, the others architectures also need such NULL version
Tdx functions.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
This change is added to incorporate basic implementation for
CRC16-CCITT-FALSE algorithm.
This function is useful for providing CRC16 value used in other data
structures that requires CRC16 value that complies with JEDEC SPD
requirements, i.e. BDAT table.
The lookup table is inherited from `https://crccalc.com/` and the result
values are also compared against this site.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
To enable AARCH64 native instruction support for Openssl,
some interfaces must be implemented. OPENSSL_cpuid_setup()
allows to probe the supported features of the platform.
Add ArmReadIdAA64Isar0Reg() to read the AA64Isar0, containing
Arm64 instruction capabilities.
A similar ArmReadIdAA64Isar0() function is available in the ArmPkg,
but the CryptoPkg where OPENSSL_cpuid_setup will reside cannot rely
on the ArmPkg.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
To enable AARCH64 native instruction support for Openssl,
some interfaces must be implemented. OPENSSL_rdtsc() requests
an access to a counter to get some non-trusted entropy.
Add ArmReadCntPctReg() to read system count.
A similar ArmReadCntPct() function is available in the ArmPkg,
but the CryptoPkg where OPENSSL_rdtsc will reside cannot rely
on the ArmPkg.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The SVSM specification relies on a specific register calling convention to
hold the parameters that are associated with the SVSM request. The SVSM is
invoked by requesting the hypervisor to run the VMPL0 VMSA of the guest
using the GHCB MSR Protocol or a GHCB NAE event.
Create a new version of the VMGEXIT instruction that will adhere to this
calling convention and load the SVSM function arguments into the proper
register before invoking the VMGEXIT instruction. On return, perform the
atomic exchange on the SVSM call pending value as specified in the SVSM
specification.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Add IoCsrRead8, IoCsrRead16, IoCsrRead32, IoCsrRead64, IoCsrWrite8,
IoCsrWrite16, IoCsrWrite32, IoCsrWrite64 to operate the IOCSR registers
of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add CsrRead, CsrWrite and CsrXChg functions for LoongArch, and use them
to operate the CSR register of LoongArch architecture.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add LoongArch AsmCpucfg function and Cpucfg definitions.
Also added Include/Register/LoongArch64/Cpucfg.h to IgnoreFiles of
EccCheck.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding LoongArch local interrupt function set, which is used to control
the opening or closing of the local interrupt when the global interrupt
is enabled.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding SetExceptionBaseAddress and SetTlbRebaseAddress functions
for LoongArch64.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
stimecmp is a CSR supported only when Sstc extension is supported by the
platform. This register can be used to set the timer interrupt directly in
S-mode instead of going via SBI call. Add a function to update this
register.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
There are different ways to manage cache on RISC-V Processors.
One way is to use fence instruction. Another way is to use CPU
specific cache management operation instructions ratified as
per RISC-V ISA specifications to be introduced in future
patches. Current method is fence instruction based, rename the
function accordingly to add that clarity.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The declarations for cache Management functions belong to BaseLib
instead of instance source file. This helps with further restructuring
of cache management code for RISC-V.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4609
The current CalculateCrc16Ansi implementation does the following:
1) Invert the passed checksum
2) Calculate the new checksum by going through data and using the
lookup table
3) Invert it back again
This emulated my design for CalculateCrc32c, where 0 is
passed as the initial checksum, and it inverts in the end.
However, CRC16 does not invert the checksum on input and output.
So this is incorrect.
Fix the problem by not inverting input checksums nor output checksums.
Callers should now pass CRC16ANSI_INIT as the initial value instead of
"0". This is a breaking change.
This problem was found out-of-list when older ext4 filesystems
(that use crc16 checksums) failed to mount with "corruption".
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add an API to retrieve satp register value.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Few of the basic helper functions required for any
RISC-V CPU were added in edk2-platforms. To support
qemu virt, they need to be added in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3871
Add the CRC16-ANSI and CRC32C implementations previously found at
Features/Ext4Pkg/Ext4Dxe/Crc{16,32c}.c to BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3675
Add QuickSort function into BaseLib
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: IanX Kuo <ianx.kuo@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The RMPADJUST instruction will be used by the SEV-SNP guest to modify the
RMP permissions for a guest page. See AMD APM volume 3 for further
details.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-9-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The PVALIDATE instruction validates or rescinds validation of a guest
page RMP entry. Upon completion, a return code is stored in EAX, rFLAGS
bits OF, ZF, AF, PF and SF are set based on this return code. If the
instruction completed succesfully, the rFLAGS bit CF indicates if the
contents of the RMP entry were changed or not.
For more information about the instruction see AMD APM volume 3.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-8-brijesh.singh@amd.com>
*v2: refine the coding format.
https://bugzilla.tianocore.org/show_bug.cgi?id=3284
This patch is to support XSETBV instruction so as to support
Extended Control Register(XCR) write.
Extended Control Register(XCR) read has already been supported
by below commit to support XGETBV instruction:
9b3ca509abd4e45439bbdfe2c2fa8780c950320a
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ni Ray <ray.ni@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Signed-off-by: Jiaxin Wu <Jiaxin.wu@intel.com>
Signed-off-by: Zhang Hongbin1 <hongbin1.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2777
Code wrapped by DISABLE_NEW_DEPRECATED_INTERFACES is deprecated.
So remove it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
VMGEXIT is a new instruction used for Hypervisor/Guest communication when
running as an SEV-ES guest. A VMGEXIT will cause an automatic exit (AE)
to occur, resulting in a #VMEXIT with an exit code value of 0x403.
Since SEV-ES is only supported in X64, provide the necessary X64 support
to execute the VMGEXIT instruction, which is coded as "rep vmmcall". For
IA32, since "vmmcall" is not supported in NASM 32-bit mode and VMGEXIT
should never be called, provide a stub implementation that is identical
to CpuBreakpoint().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID instruction requires the current value of the XCR0
register. In order to retrieve that value, the XGETBV instruction needs
to be executed.
Provide the necessary support to execute the XGETBV instruction.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2054
Runtime checks returned via status return code should not work as
assertions to permit parsing not trusted data with SafeString
interfaces. Replace ASSERT() with a DEBUG_VERBOSE message.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Brian J. Johnson <brian.johnson@hpe.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin Häuser <mhaeuser@outlook.de>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Vincent Zimmer <vincent.zimmer@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1959
The macros EFI_LIST_FOR_EACH and EFI_LIST_FOR_EACH_SAFE have been
duplicated across several drivers. These macros have proven useful and
established a commonly used pattern for linked list iteration.
This change defines the macros in BaseLib.h alongside other generic linked
list macros and functions.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Based on Intel Software Develeper's Manual, add all fields in IA32_CR4.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Rewrite Base64Decode() from scratch, due to reasons listed in the second
reference below.
As first step, redo the interface contract, and replace the current
implementation with a stub that asserts FALSE, then fails.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin Häuser <mhaeuser@outlook.de>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1891
Ref: http://mid.mail-archive.com/c495bd0b-ea4d-7206-8a4f-a7149760d19a@redhat.com
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
5-level paging is documented in white paper:
https://software.intel.com/sites/default/files/managed/2b/80/5-level_paging_white_paper.pdf
Commit f8113e25001e715390127f23e2197252cbd6d1a2
changed Cpuid.h already.
This patch updates IA32_CR4 structure to include LA57 field.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
(cherry picked from commit 7c5010c7f88b790f4524c4a5311819e3af5e2752)
This reverts commit 7c5010c7f88b790f4524c4a5311819e3af5e2752.
Commit
7c5010c7f8 MdePkg/BaseLib.h: Update IA32_CR4 structure for 5-level paging
technically breaks the EDKII development process documented in
https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Development-Process
and Maintainers.txt in EDKII repo root directory.
The voilation is commit 7c5010c7f8 doesn't have a Reviewed-by or
Acked-by from MdePkg maintainers.
Signed-off-by: Ray Ni <ray.ni@intel.com>
5-level paging is documented in white paper:
https://software.intel.com/sites/default/files/managed/2b/80/5-level_paging_white_paper.pdf
Commit f8113e25001e715390127f23e2197252cbd6d1a2
changed Cpuid.h already.
This patch updates IA32_CR4 structure to include LA57 field.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
This patch adds SSP - shadow stack pointer to JumpBuffer.
It will be used for the platform that enabled CET/ShadowStack.
We add gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask
to control the global enable/disable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Introduce public functions Base64Encode and Base64Decode.
https://bugzilla.tianocore.org/show_bug.cgi?id=1370
v2:1.Remove some white space.
2.Add unit test with test vectors in RFC 4648.
https://github.com/shenglei10/edk2/tree/encode_testhttps://github.com/shenglei10/edk2/tree/decode_test
v3:1.Align white space.
2.Update comments of Base64Encode and Base64Decode.
3.Change the use of macro RETURN_DEVICE_ERROR to
RETURN_INVALID_PARAMETER in string.c.
v4:Change parameters' names.
v5:1.Update usage of variables.
2.Remove debug message in Base64Decode().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Introduce two public functions CharToUpper and AsciiCharToUpper.
They have the same functions as InternalCharToUpper and
InternalBaseLibAsciiToUpper.Considering the internal functions will
be removed,so directly I change their function names to the public ones'.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
