The function ArmPlatformInitializeSystemMemory() is defined by
ArmPlatformLib, but is only ever called when using the PrePeiCore
flavor of the startup code. Also, none of the remaining upstream
platforms actually implement anything in that function in the first
place. So let's just remove it altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19788 6f19259b-4bc3-4df7-8a09-765794883524
The MP ID Register is not enough to know the position of the core in the SoC.
We could have SoC with multi cluster of CPUs that do not contain the
same number of CPUs.
This function should return the position of the CPU in the SoC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13770 6f19259b-4bc3-4df7-8a09-765794883524
The function only used in Secure Firmware used to be mixed with
the Non-Secure/Normal functions in ArmPlatformLib.
When the Secure Firmware was not required for some platforms (eg:
BeagleBoard), these functions were empty functions.
This new interface has been created to clean the ArmPlatformLib
interface between the SEC and PEI phases.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13260 6f19259b-4bc3-4df7-8a09-765794883524
- ArmPlatformNormalInitialize() has been renamed into ArmPlatformInitialize()
- Make the function be called at the early stage of the PEI phase as some
platforms require their interconnects or clocks to be initialize before any
access to Timers or UARTs.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13245 6f19259b-4bc3-4df7-8a09-765794883524
The GICD_IGROUPR0 is banked for each connected processor. It means the
Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be
configured for every processor.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524
When the BeagleBoard UEFI is started from a 1st (or 2nd stage) boot loader
it is possible there are still some pending IRQ.
Clean the interrupts before starting the BeagleBoard UEFI.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12034 6f19259b-4bc3-4df7-8a09-765794883524
To build the UEFI BeagleBoard firmware using this ARM framework either use ./build-next.sh
or directly call the EDK2 BaseTools with BeagleBoardPkg-next.dsc.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11998 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Evan Lloyd
Ronald Cron
oliviermartin